Tecnologia em Metalurgia, Materiais e Mineração
https://tecnologiammm.com.br/doi/10.4322/tmm.00403006
Tecnologia em Metalurgia, Materiais e Mineração
Artigo Original

TIRAS DE AÇO LAMINADAS A FRIO COM O USO DE NITROGÊNIO LIQUIDO

COLD ROLLING STRIP STEEL WITH LIQUID NITROGEN

Ferreira Filho, Antenor; Bielskis, Marcelo Franck

Downloads: 0
Views: 985

Resumo

Na laminação a frio, durante a etapa de laminação de acabamento, utiliza-se habitualmente como meio de refrigeração e lubrificação nas regiões de contato entre cilindros e material um grande volume de mistura de óleo lubrificante com água (emulsão aquosa) por aspersão. Durante a deformação a frio a emulsão adere aos cilindros e a tira causando uma diminuição da força de laminação, ao mesmo tempo atua como meio de refrigeração. No trabalho será apresentada uma nova e revolucionária técnica de laminação de acabamento com o uso de nitrogênio líquido em substituição a emulsão aquosa. Serão destacadas as principais vantagens que a nova tecnologia oferece quando comparada aos processos de laminação convencionais. Dentre as vantagens destacam-se o excelente acabamento de superfície quanto à limpeza e brilho, a uniformidade de acabamento e rugosidade superficial, a eliminação de problemas por oxidação superficial além de possibilitar o aumento na velocidade do processo de laminação, a redução de etapas de pré-tratamento, eliminação de problemas de falta de aderência em materiais revestidos e a possibilidade de novos desenvolvimentos de produtos devido a produção de tiras isentas de óleo de proteção.

Palavras-chave

Tiras, Laminação a frio, Emulsão, Nitrogênio

Abstract

During the stage skin-pass in the cold rolling process usually used as refrigeration and lubrication in the regions of contact between roll and strip steel a great volume of oil mixture with water (emulsion) for spray. During the cold deformation the emulsion adheres to the roll and the strip causing a reduction of the rolling force, and at same time keeping the suitable refrigeration. The work will be presented a new and revolutionary technique of skin-pass which applies liquid nitrogen instead of emulsion. Will be emphasized the main advantages that the new technology offers in comparison with the conventional rolling process. Amongst the advantages it can be distinguished the excellent finishing of surface as well as the cleanness and brightness, the uniformity of finishing and surface roughness, the elimination of problems due to surface oxidation, making possible besides the increase in the speed of the rolling process, the reduction of stages of pre-treatment, elimination of problems of adherence in coated materials and the possibility of new developments of products due to production of strips free from protective oil.

Keywords

Strip, Cold rolling, Emulsion, Nitrogen

Referências



1 Air Products. Using liquid nitrogen in the roll bite of a cold mill. Steel Times International, v. 28, n. 4, p. 34-7, June 2004.

2 FERREIRA FILHO, A. Título do trabalho. In: WORKSHOP TÉCNICO BRASMETAL WAELZHOLZ, 2004, São Paulo. São Paulo: Brasmetal Waelzholz, 2004. BW News. Tecnologia e inovação. Set/out.

3 PADILHA, A.F.; SICILIANO, F. Encruamento, recristalização, crescimento de grão e textura. 3.ed. São Paulo: Associação Brasileira de Metalurgia e Materiais, 2005.

4 PLICHT, G.; HÖFINGHOFF, H.; DEMSKI, T.; EDWARDS, R. Cold rolling of metals strip using technical gases. [S.l.]: Air Products and Chemical, 2004. [Publicação interna]

5 PLICHT, G.; SCHILLAK, K.; HÖFINGHOFF, H.; DEMSKI, T. Cold rolling of metals strip using technical gases. In: INTERNATIONAL AND EUROPEAN STEEL ROLLING CONFERENCES, 9.; EUROPEAN STEEL ROLLING CONFERENCES, 4., 2006, France, Paris. [S.l.]: Air Products and Chemical, 2006.

6 Brasmetal Waelzholz. Projeto laminação com nitrogênio. Diadema, 2003. [Relatório Técnico Interno].
588696c67f8c9dd9008b46bb 1573492069 Articles
Links & Downloads

Tecnol. Metal. Mater. Min.

Share this page
Page Sections