Tecnologia em Metalurgia, Materiais e Mineração
https://tecnologiammm.com.br/doi/10.4322/tmm.2011.002
Tecnologia em Metalurgia, Materiais e Mineração
Artigo Original

AÇO ESTRUTURAL COM RESISTÊNCIA À CORROSÃO ATMOSFÉRICA MARINHA SEVERA E DE ELEVADA RESISTÊNCIA MECÂNICA

STRUCTURAL STEEL WITH HIGH MECHANICAL STRENGTH AND ATMOSPHERIC CORROSION RESISTANCES

Carneiro, Rogerio Augusto; Alvarenga, Evandro de Azevedo

Downloads: 2
Views: 1082

Resumo

Foi desenvolvido, em escala piloto, aço estrutural Ni-Si-Mo com limite de escoamento acima de 480 MPa e alta resistência à corrosão atmosférica marinha. A elevada resistência mecânica possibilita reduzir a espessura de componentes metálicos e, consequentemente, o peso final de toda a estrutura, tanto da parte metálica quanto de alvenaria. A resistência à corrosão foi medida por meio de teste acelerado de corrosão atmosférica com aspersão intermitente de solução salina a 3% p/v de NaCl três vezes por semana (norma ISO 11474) durante três anos e de teste não-acelerado de corrosão com exposição em atmosfera marinha (norma NBR 6209) durante seis anos, comparativamente a aços USI-SAC 300 (patinável) e SAE 1006. O desempenho do aço Ni-Si-Mo foi muito superior, com taxas de corrosão menores e ausência de desplacamento de camada de óxidos. O melhor desempenho anticorrosivo, atribuído à formação de camada de óxidos mais compacta e protetora, permite eliminar proteção por pintura na maioria de situações em que essa é necessária para os aços patináveis tradicionais. Dessa forma, são eliminados os custos diretos da pintura inicial e de sua manutenção, bem como os indiretos devido a eventuais necessidades de paradas operacionais, além de problemas relacionados com dificuldades de acesso ou contaminações.

Palavras-chave

Aço estrutural, Resistência à corrosão, Resistência mecânica

Abstract

A Ni-Si-Mo structural steel was developed with yield strength above 480 MPa and high atmospheric corrosion resistance. The high yield strength enables the thickness reduction of metallic components and, consequently, the weight of the whole structure, including masonry. The corrosion resistance was measured by field tests with intermittent sprinkling of 3% w/v NaCl salt solution three times a week (ISO 11474) during three years and exposure to marine atmosphere (NBR 6209) during six years, compared with USI-SAC 300 (weathering steel) and SAE 1006 steels. The Ni-Si-Mo steel shows the best performance and its oxide layer does not scale off. According to these results, it is possible to recommend the use of the unpainted Ni-Si-Mo steel in environments where the traditional weathering steels usually requires painting. In this way, all costs involved with maintenance, repair and eventual shutdowns can be eliminated, as well as occasional problems such as contamination and poor access to the site.

Keywords

Structural steel, Corrosion resistance, Mechanical strength

Referências

1 AMERICAN SOCIETY FOR TESTING AND MATERIALS. Standard ASTM A588/A588M: Standard specification for high-strength low-alloy structural steel, up to 50 ksi [345 MPa] minimum yield point, with atmospheric corrosion resistance. West Conshohocken, 2005.

2 AMERICAN SOCIETY FOR TESTING AND MATERIALS. Standard ASTM A606/A606M-09a: Standard specification for steel, sheet and strip, high-strength, low-alloy, hot-rolled and cold-rolled, with improved atmospheric corrosion resistance. West Conshohocken, 2004.

3 KODAMA, T. Weathering steel in a coastal atmosphere. Corrosion Engineering, v. 48, p. 1-14, 2000.

4 JAPANESE INDUSTRIAL STANDARDS. Standard JIS Z 2382: Determination of pollution for evaluation of corrosivity of atmospheres. Tokyo, 2001.

5 AMERICAN SOCIETY FOR TESTING AND MATERIALS. Standard ASTM Test G140: Test method for determining atmospheric chloride deposition rate by wet candle method. West Conshohocken, 2002.

6 SWEDISH STANDARDS INSTITUTION. Standard SIS 05 5900: Pictorial surface preparation standards for painting steel surfaces. Stockholm, 1988.

7 INTERNATIONAL ORGANIZATION FOR STANDARDIZATION. Standard ISO 11474: Corrosion of metals and alloys: corrosion tests in artificial atmosphere: accelerated outdoor test by intermittent spraying of salt solution (scab test). Geneva, 1998.

8 DAMIÃO, D. P.; ALVARENGA, E. A. Pesquisa e desenvolvimento em corrosão e em engenharia de superfície na Usiminas: infraestrutura e resultados. In: CONGRESSO ANUAL DA ABM, 64, 2009, Belo Horizonte [palestra].

9 INTERNATIONAL ORGANIZATION FOR STANDARDIZATION. Standard ISO 9223: Corrosion of metals and alloys: corrosivity of atmospheres: classification. Geneva, 1992.

10 ASSOCIAÇÃO BRASILEIRA DE NORMAS TÉCNICAS. Norma NBR 6209: Materiais metálicos não-revestidos: ensaios não-acelerado de corrosão atmosférica: método de ensaio. Rio de Janeiro, 1986.

11 ASSOCIAÇÃO BRASILEIRA DE NORMAS TÉCNICAS. Norma NBR 6210: Corrosão atmosférica: materiais metálicos: preparo, limpeza e determinação da taxa de corrosão de corpos-de-prova em ensaios de corrosão. Rio de Janeiro, 2008.

12 POURBAIX, M. the linear bilogarithmic law for atmospheric corrosion. In: AILOR, W. H. (Ed.). Atmospheric corrosion. New York: John Wiley, 1982. p. 107-21.

5886969e7f8c9dd9008b4608 tmm Articles
Links & Downloads

Tecnol. Metal. Mater. Min.

Share this page
Page Sections