Tecnologia em Metalurgia, Materiais e Mineração
https://tecnologiammm.com.br/doi/10.4322/tmm.2011.005
Tecnologia em Metalurgia, Materiais e Mineração
Artigo Original

THERMAL FATIGUE RESISTANCE OF WELDED JOINTS IN STAINLESS STEEL HIGH TEMPERATURE EXHAUST APPLICATIONS

Faivre, Laurent; Santacreu, Pierre-Olivier; Leseux, Johan

Downloads: 1
Views: 904

Abstract

Weld seams often constitute critical points in the thermo-mechanical fatigue design of a stainless steel automotive exhaust manifold. Therefore, a thermal fatigue test on V-shaped specimens was developed by ArcelorMittal Isbergues Research Centre to simulate the thermo-mechanical loading of such a part. Two ferritic base metals dedicated to high temperature applications, together with various filler materials (both austenitic and ferritic grades) commonly used in the exhaust market were tested with a 250-950°C thermal cycle. The results were compared in terms of lifetime, cracking mechanisms and micro-structural evolution in order to point out the best base/filler metal combinations. For austenitic weld metals, the higher thermal expansion coefficient than ferritic weld metals (50% higher) led to a more pronounced oxidation and a higher level of stresses generated at the interface between melted zone and base metal. Consequently, the cracks were localized to this interface for austenitic filler material while they appeared in the base metal and out of the heat affected zone for ferritic filler material.

Keywords

Thermal fatigue, GMAW welding, Laser welding, Ferritic stainless steel

Referências

1 GOMEZ, T.; DEUSTER, U. An integral engineering solution for design of exhaust manifolds. In: SAE WORLD CONGRESS & EXHIBITION, 2009, Detroit, USA. Warrendale: SAE, 2009.

2 SANTACREU, P. O. et al. Thermo-mechanical fatigue of stainless steels for automotive exhaust system. In: CONGRESSO ANUAL DA ABM – INTERNACIONAL, 58., 2003, Rio de Janeiro. Anais... São Paulo: ABM, 2003.

3 FUJITA, N. et al. Effect of Nb on high-temperature properties for ferritic stainless steel. Scripta Materialia, v. 35, n. 6, p. 705-10, Sep. 1996. http://dx.doi.org/10.1016/1359-6462(96)00214-X

4 SANTACREU, P. O.; FAIVRE, L.; ACHER, A. On potential applications of ferritic stainless steel grades in high temperature environment. In: BRAZILIAN STAINLESS STEEL CONFERENCE – INTERNATIONAL EDITION, 10., 2010, Rio de Janeiro. Proceedings... São Paulo: Núcleo Inox, 2010.

5 RENAUDOT, N. et al. 430LNb, a new ferritic welding wire for automotive exhaust applications. In: SAE 2000 WORLD CONGRESS, 2000, Detroit, USA. Warrendale: SAE, 2000.

6 CHINOUILH, G.; SANTACREU, P. O.; HERBELIN, J. M. Thermal fatigue design of stainless steel exhaust manifolds. In: SAE WORLD CONGRESS & EXHIBITION, 2007, Detroit, USA. Warrendale: SAE, 2007.

5886969f7f8c9dd9008b460b tmm Articles
Links & Downloads

Tecnol. Metal. Mater. Min.

Share this page
Page Sections