Tecnologia em Metalurgia, Materiais e Mineração
https://tecnologiammm.com.br/doi/10.4322/tmm.2013.049
Tecnologia em Metalurgia, Materiais e Mineração
Artigo Original

REMOÇÃO DE CARBONO CONTIDO NO SILÍCIO METÁLIÇO POR DECANTAÇÃO DE CARBONETOS PARA PRODUÇÃO DE SILÍCIO GRAU SOLAR

CARBON REMOVAL FROM METALLIC SILICON BY CARBIDE SETTLING FOR SOLAR GRADE SILICON PRODUCTION

Ribeiro, Tiago Ramos; Martorano, Marcelo Aquino; Ferreira Neto, João Batista

Downloads: 0
Views: 906

Resumo

A utilização de energia solar no mundo cresceu acentuadamente nos últimos anos. O material mais utilizado na produção de células solares é um silício metálico de alta pureza produzido a partir do refino de um silício de menor pureza. Devido ao aumento da demanda por componentes fotovoltaicos, novos processos de refino têm sido investigados. O carbono é uma das impurezas que precisam ser removidas e uma técnica de remoção possível baseia-se na decantação das partículas de carboneto de silício precipitadas no silício líquido. Testes de decantação foram realizados a 1.500°C com uma e seis horas de tratamento. Os resultados mostram que a alteração no tempo de decantação não afeta significativamente a intensidade da remoção de carbono e a zona refinada do lingote possui teores acima do limite de carbono (43 ppm) definido na norma para o silício de grau solar. Os dados levantados neste trabalho, aliados a dados de literatura, mostram que a decantação não é uma rota capaz de remover o carbono para o nível necessário a aplicações fotovoltaicas.

Palavras-chave

Silício, Decantação, Carbono, Refino

Abstract

The use of solar energy is growing sharply in the past years. The most used material for solar cells is high-purity silicon produced by refining low-purity silicon. With the increasing demand for photovoltaic components, new refining processes have been investigated. Carbon is one of the impurities to be removed and one possible removing technique is based on the settling of silicon carbide particles. Settling tests were carried out at 1,500°C during one and six hours. Results show that differences in settling time do not affect carbon removal significantly and that the carbon contents after settling are still higher than that required by standards for solar grade silicon (43 ppm). Results from this work and from literature show that settling is not a feasible processing step for carbon removal to the level needed for photovoltaic applications.

Keywords

Silício, Decantação, Carbono, Refino

Referências



1. European Photovotaic Industry Association - EPIA. Global Market Outlook for Photovoltaics until 2016. Bruxelas: EPIA; 2012. Relatório Técnico.

2. Geerligs LJ, Wyers GP, Jensen R, Raaness OS, Waernes AN, Santén S, et al. Solar-grade silicon by a direct route based on carbothermic reduction of silica: requirements and production technology. Anais do 12th Workshop on Crystalline Silicon Solar Cell Materials and Process. Breckenridge; 2002.

3. Ovrelid E, Geerlings B, Waernes A, Raaness O, Ingeborg S, Jensen R, et al. Solar grade silicon by direct metallurgical process. In: Proceedings of the Silicon for the Chemical Industry; 2006 jun; Trondheim, Noruega. Trondheim: Norwegian University of Science and Technology; 2006.

4. Martorano MA, Ferreira Neto JB, Oliveira TS and Tsubaki TO. Refining of Metallurgical Silicon by Directional Solidification. Materials Science and Engineering B. 2011;176:217-226. http://dx.doi.org/10.1016/j.mseb.2010.11.010

5. Martorano MA, Ferreira Neto JB, Oliveira TS, Tsubaki TO. Macrosegregation of Impurities in Directionally Solidified Silicon. Metallurgical and Materials Transactions A. 2011;42A:1870-1886.

6. Du G, Zhou L, Rossetto P, Wan Y. Hard inclusions and their detrimental effects on the wire sawing process for multicrystalline silicon. Solar Energy Materials and Solar Cells. 2007;91(18):1743-1748. http://dx.doi.org/10.1016/j. solmat.2007.06.001

7. Lotnyk A, Bauer J, Breitenstein O, Blumtritt H. A TEM study of SiC Particles and Filaments Precipitated in Multicrystalline Si for Solar Cells. Solar Energy Materials and SolarCells. 2008;92(10):1238-1240. http://dx.doi. org/10.1016/j.solmat.2008.04.016

8. Dalaker H. Solubility of Carbon and Nitrogen in the Silicon Rich Part of the Si-C-N-B System [tede de doutorado]. Trondheim: Norwegian University of Science and Technology; 2009.

9. Mühlbauer A, Diers V, Walther A, Grabmaier J. Removal of C/SiC from liquid silicon by directional solidification. Journal of Crystal Growth. 1991;108:41-52. http://dx.doi.org/10.1016/0022-0248(91)90352-6

10. Ciftja A. Solar silicon refining: inclusions, settling, filtration, wetting. Trondheim: Norwegian University of Science and Technology; 2009.

11. Sakaguchi K, Maeda M. Decarburization of Silicon Melt for Solar Cells by Filtration and Oxidation. Metallurgical Transactions B. Agosto de 1992;23B:423-427.

12. Klevan OS. Removal of C and SiC from Si and FeSi during ladle refining and solidification. Trondheim: Norwegian University of Science and Technology; 1997.

13. Mills KC, Courtney L. Themophysical properties of Silicon. ISIJ International. 2000;40(Supplemento):S130-S138.

14. Richardson JF, Zaki WN. Sedimentation and Fluidisation: Part I. Transactions of the Institution of Chemical Engineers. 1954;32(Suplemento):S82-S100
588696e77f8c9dd9008b475a tmm Articles
Links & Downloads

Tecnol. Metal. Mater. Min.

Share this page
Page Sections