Tecnologia em Metalurgia, Materiais e Mineração
https://tecnologiammm.com.br/article/doi/10.4322/2176-1523.0921
Tecnologia em Metalurgia, Materiais e Mineração
Artigo Original

QUANTIFICAÇÃO DE FASES INTERMETÁLICAS EM AÇO INOXIDÁVEL SUPERDÚPLEX POR ESTEREOLOGIA QUANTITATIVA – EFEITO DE DIFERENTES FONTES DE IMAGENS

QUANTIFICATION OF INTERMETALLIC PHASES IN SUPERDUPLEX STAINLESS STEEL BY QUANTITATIVE STEREOLOGY – EFFECT OF DIFERENTS SOURCES OF IMAGES

Paschoal, Mariana Bortoletto; Romana, Raquel; Magnabosco, Rodrigo

Downloads: 2
Views: 1039

Resumo

O objetivo deste trabalho é a quantificação por estereologia quantitativa de fases intermetálicas formadas em envelhecimento a 850°C de aço inoxidável superdúplex utilizando imagens de elétrons retroespalhados obtidas por microscopia eletrônica de varredura (BSC-MEV), comparando com a quantificação realizada com imagens de microscopia óptica (MO) após ataque eletrolítico seletivo de 10% de KOH. Para tal, amostras do aço inoxidável superdúplex UNS S32750, previamente laminado a quente e tratado a 1.100°C por 30 minutos com resfriamento em água, foram envelhecidas isotermicamente a 850°C entre 10 min e 816 h, com o objetivo de produzir microestruturas com diferentes frações de fases. Ao final do procedimento experimental, pode-se observar que com o microscópio eletrônico de varredura pode se quantificar a fração de fases intermetálicas chi e sigma, além de nitretos de cromo, não distinguíveis no microscópio ótico; além disso, a somatória da fração de sigma e chi obtida por BSC-MEV é sempre inferior a fração destas fases obtidas por MO, mostrando as vantagens se quantificar estas fases por estereologia quantitativa de imagens de BSC-MEV.

Palavras-chave

Aço inoxidável superdúplex, Fases intermetálicas, Análise quantitativa.

Abstract

The objective of this work is the quantification by quantitative stereology of intermetallic phases formed in aging at 850°C of superduplex stainless steel using backscattered electron images obtained by scanning electron microscopy (BSC-SEM), comparing with the quantification performed on images of optical microscopy (OM) after selective electrolytic etching in 10% KOH. Samples of superduplex stainless steel UNS S32750, previously hot rolled and treated for 30 min at 1100°C followed by water quenching, were aged between 10 min and 816 h, in order to obtain microstructures with different phases fractions. It can be observed that chi and sigma intermetallic phases can be quantified from BSC-SEM images, and also chromium nitrides can be quantified, being those phases indistinguishable in OM; furthermore, the sum of sigma and chi fractions obtained by BSC-SEM is always inferior to the fraction of phases obtained by optical microscopy, showing the advantages of quantifying this phases by quantitative stereology of images by BSC-SEM.

Keywords

Superduplex stainless steel, Intermetallic phases, Quantitative analysis.

Referências

1 Nilsson JO. Super duplex stainless steels. Materials Science and Technology. 1992;8(8):685-700. http://dx.doi. org/10.1179/mst.1992.8.8.685.

2 Alvarez-Armas I, Degallaix-Moreuil S. Duplex stainless steels. Londres: ISTE; 2009. p. 125-128.

3 Magnabosco R. Kinetics of sigma phase formation in a Duplex Stainless Steel. Materials Research. 2009;12(3):321‑327. http://dx.doi.org/10.1590/S1516-14392009000300012.

4 Goldstein JI, Newbury DE, Echlin P, Joy DC, Lyman CE, Lifshin E, et al. Scanning electron microscopy and X-ray microanalysis. 3. ed. Nova Iorque: Springer; 2003.

5 Calliari I, Brunelli K, Dabalà M, Ramous E. Measuring secondary phases in duplex stainless steels. JOM. 2009;61(1):80-83. http://dx.doi.org/10.1007/s11837-009-0016-8.

6 Magnabosco R, Santos DC. Intermetallic phases formation during short aging between 850ºC and 950ºC of a superduplex stainless steel. Journal of Materials Research and Technology. 2012;1(2):71-74. http://dx.doi. org/10.1016/S2238-7854(12)70013-3.

7 Calliari I, Zanesco M, Ramous E, Bassani P. Effects of isothermal ageing and continuous cooling after solubilization in a duplex stainless steel. Journal of Materials Engineering and Performance. 2007;16(1):109-112. http://dx.doi. org/10.1007/s11665-006-9017-8.

8 Pohl M, Storz O, Glogowski T. Effect of intermetallic precipitations on the properties of duplex stainless steel. Materials Characterization. 2007;58(1):65-71. http://dx.doi.org/10.1016/j.matchar.2006.03.015.

9 Santos DC, Magnabosco R, Moura C No. Influence of sigma phase formation on pitting corrosion of an aged UNS S31803 duplex stainless steel. Corrosion. 2013 [acesso em 14 maio 2015];69:900-911. Disponível em: http:// corrosionjournal.org/doi/abs/10.5006/0768.

10 Melo EB, Magnabosco R, Moura C No. Influence of the microstructure on the degree of sensitization of a duplex stainless steel UNS S31803 aged at 650ºC. Materials Research. 2013 [acesso em 14 maio 2015];16(6):1336-1343. Disponível em: http://www.scielo.br/pdf/mr/v16n6/aop_1920.pdf.
588696ff7f8c9dd9008b47c7 tmm Articles
Links & Downloads

Tecnol. Metal. Mater. Min.

Share this page
Page Sections