INFLUÊNCIA DE DIFERENTES TRATAMENTOS TÉRMICOS DE RECOZIMENTO NAS FRAÇÕES DE FASES E NAS PROPRIEDADES MECÂNICAS DO AÇO INOXIDÁVEL DUPLEX UNS S31803
INFLUENCE OF DIFFERENT ANNEALING HEAT TREATMENT ON PHASES FRACTION AND THE MECHANICAL PROPERTIES OF DUPLEX STAINLESS STEEL UNS S31803
Maria Amélia Martins, Geraldo Lúcio Faria, Tarcísio Reis de Oliveira
Resumo
Neste trabalho a influência de diferentes tratamentos térmicos nas frações de fases (ferrita, austenita e sigma) e seus efeitos nas propriedades mecânicas de um aço inoxidável duplex UNS S31803 foram investigados. A quantificação dessas fases foi feita por técnicas de microscopia óptica e microscopia eletrônica de varredura e as propriedades mecânicas avaliadas através de ensaios de tração uniaxial e impacto Charpy-V. As análises das fases primárias indicaram que a fração de austenita foi superior à de ferrita em todas as condições estudadas. A análise de fase sigma indicou que para uma mesma temperatura de recozimento, quanto maior o tempo de encharque, maiores as frações de sigma encontradas e maiores os valores de limite de resistência. Além disso, as amostras recozidas em menor tempo de encharque foram as que alcançaram os maiores valores de energia de absorvida.
Palavras-chave
Abstract
In this work the influence of different isothermal heat treatments on phase fraction (ferrite, austenite and sigma) and its effects on mechanical properties of duplex stainless steel UNS S31803 were investigated. It has been performed heat treatments varying temperature and aging time. The quantification of phases were analyzed through light optical microscopy and scanning electron microscopy and the mechanical properties were evaluated using uniaxial tensile and Charpy-V impact tests. The results of primary phases have indicated that the austenite fraction was higher than ferrite in all conditions studied. On the other hand, high amounts of sigma phase were observed on the isothermal long time annealing conditions. Furthermore, the results of impact test of samples with low soaking time and, smaller fraction of sigma phase, were the ones that reached the highest values of impact energy absorption.
Keywords
References
1 Alvarez-Armas I. Duplex stainless steels: brief history and some recent alloys. Recent Patents on Mechanical Engineering. 2008;1(1):51-57. http://dx.doi.org/10.2174/2212797610801010051.
2 Pohl M. The ferrite/austenite ratio of duplex stainless steels. Zeitschrift fur Metallkunde. 1995;86(2):97-102.
3 Costa e Silva AL, Mei PR. Aços e ligas especiais. 3. ed. São Paulo: Blucher; 2010.
4 Nilsson JO. Super duplex stainless steels. Materials Science and Technology. 1992;8(8):685-700. http://dx.doi.org/10.1179/mst.1992.8.8.685.
5 Solomon HD, Devine TM Jr. Duplex stainless steels: a tale of two phases. In: Proceedings of the Conference Duplex Stainless Steels; 1982; Ohio. Ohio: ASM; 1982. p. 693-756.
6 Nilsson JO, Chai G. The physical metallurgy of duplex stainless steels. Sandviken: Sandvik Materials Technology, R&D Centre; 1997.
7 Charles J, Chemelle P. The history of duplex developments, nowadays DSS properties and duplex market future trends. World Iron & Steel. 2012;1:46-57.
8 Sedriks AJ. Corrosion of stainless steels. 2nd ed. New York: John Wiley & Sons; 1996.
9 Magnabosco R. Kinetics of sigma phase formation in a duplex stainless steel. Materials Research. 2009;12(3):321-327. http://dx.doi.org/10.1590/S1516-14392009000300012.
10 Potgieter JH. Influence of σ phase on general and pitting corrosion resistance of SAF 2205 duplex stainless steel. British Corrosion Journal. 1992;27(3):219-223. http://dx.doi.org/10.1179/000705992798268530.
11 Sieurin H, Sandström R. Sigma phase in duplex stainless steel 2205. Materials Science and Engineering. 2007;444A(1-2):271-276. http://dx.doi.org/10.1016/j.msea.2006.08.107.
12 Costa e Silva AL, Avillez RR. Avaliação da cinética de precipitação de compostos intermetálicos em aços inoxidáveis duplex através de modelamento matemático da difusão. In: Anais do 64º Congresso Anual da ABM; 2009; Belo Horizonte. São Paulo: ABM; 2009.
13 Magnabosco R, Dos Santos DC. Formação de fases intermetálicas em envelhecimentos rápidos entre 850 e 950°C em aço inoxidável superdúplex. In: Anais do Congresso Anual da ABM; 2011; São Paulo. São Paulo: ABM; 2011.
14 American Society for Testing and Materials. ASTM A240/A240M-12: standard specification for chromium and chromium-nickel stainless steel plate, sheet, and strip for pressure vessels and for general applications. West Conshohocken: ASTM; 2012.
15 American Society for Testing and Materials. ASTM E45-13: standard test methods for determining the inclusion content of steel. West Conshohocken: ASTM; 2013.
16 American Society for Testing and Materials. ASTM E8/ E8M-16A: standard test methods for tension testing of metallic materials. West Conshohocken: ASTM; 2016.
17 American Society for Testing and Materials. ASTM A923-14: standard test methods for detecting detrimental intermetallic phase in duplex austenitic/ferritic stainless steels. West Conshohocken: ASTM; 2014.
18 Nilsson JO. Super duplex stainless steels. Materials Science and Technology. 1992;8(8):685-700. http://dx.doi.org/10.1179/mst.1992.8.8.685.
19 Pohl M, Storz O, Glogowski T. Effect of intermetallic precipitations on the properties of duplex stainless steel. Materials Characterization. 2007;58(1):65-71. http://dx.doi.org/10.1016/j.matchar.2006.03.015.
20 Brodusch N, Demers H, Gauvin R. Nanometres-resolution Kikuchi patterns from materials sciencespecimens with transmission electron forward scatter diffractionin the scanning electron microscope. Journal of Microscopy. 2013;250(Pt 1):1-14. http://dx.doi.org/10.1111/jmi.12007.
21 Outokumpu. Handbook of stainless steel. Sweden: Outokumpu; 2013.
Facebook
Google+
Twitter
LinkedIn
Mendeley
StumbleUpon
CiteULike
Reddit
Email