Tecnologia em Metalurgia, Materiais e Mineração
https://tecnologiammm.com.br/article/doi/10.4322/2176-1523.20202080
Tecnologia em Metalurgia, Materiais e Mineração
Artigo Original

POTENTIAL FOR IMPROVEMENTS IN MECHANICAL PROPERTIES OF AISI 9260 STEEL BY QUENCHING AND PARTITIONING HEAT TREATMENT

POTENCIAL PARA MELHORIAS NAS PROPRIEDADES MECÂNICAS DO AÇO AISI 9260 ATRAVÉS DO TRATAMENTO TÉRMICO DE TÊMPERA E PARTICIONAMENTO

Lauro Correa Romeiro, Nestor Cezar Heck, Danilo Assad Ludewigs

Downloads: 2
Views: 1057

Abstract

In this work the quenching and partitioning (Q&P) treatment is applied to AISI 9260 steel combining different quenching temperatures (QT), and partitioning times and temperatures in order to evaluate mechanical properties (e.g. ultimate tensile strength, elongatin, toughness, and their combination). AISI 9260 steel, besides having the advantage of a lower cost than most of the low alloy steels, can achieve high retained austenite (RA) fraction levels through the application of the Q&P treatment thanks to its few alloying elements, mainly silicon. The importance of RA lies in its ability to improve ductility and toughness; in this work, RA is determined via X-ray diffraction analysis (XRD) and the mechanical properties are assessed through conventional tensile test and, fracture toughness test (FT) – FT being seldom reported in several Q&P studies. The results of the present work suggest that the Q&P treatment applied to AISI 9260 steel could increase its industrial use by virtue of a good combination of strength, ductility and toughness.

Keywords

Quenching and partitioning; Retained austenite; AISI 9260 steel.

Resumo

Neste trabalho, o tratamento de têmpera e particionamento (Q&P) é aplicado ao aço AISI 9260 combinando diferentes temperaturas de têmpera (QT) e tempos e temperaturas de particionamento para avaliar as propriedades mecânicas (resistência à tração, alongamento, tenacidade e sua combinação). O aço AISI 9260, além de ter a vantagem de um custo menor do que a maioria dos aços de baixa liga, pode alcançar altos níveis de fração de austenita retida (AR) através da aplicação do tratamento Q&P graças aos seus poucos elementos de liga, principalmente silício. A importância da AR consiste na sua capacidade de melhorar a ductilidade e a tenacidade; neste trabalho, a AR é determinada por análise de difração de raios-X (DRX) e as propriedades mecânicas são avaliadas através de ensaio de tração convencional, e do teste de tenacidade à fratura (FT) - FT é raramente relatado em vários estudos com tratamento Q&P. Os resultados do presente trabalho sugerem que o tratamento Q&P aplicado ao aço AISI 9260 pode ampliar seu uso industrial em virtude de uma boa combinação de resistência, ductilidade e tenacidade.

Palavras-chave

Têmpera e particionamento; Austenita retida; Aço AISI 9260.

Referências

1 Bhattacharya D. Metallurgical perspectives on advanced sheet steels for automotive applications. In: Weng Y, Dong H, Gan Y, editors. Advanced steels. Heidelberg: Springer; 2011. 511 p.

2 De Moor E, Lacroix S, Clarke AJ, Penning J, Speer JG. Effect of retained austenite stabilized via quench and partitioning on the strain hardening of martensitic steels. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 2008;39A:2586-2595.

3 Ghazvinloo H, Honarbakhsh-Raouf A. Effect of partitioning time on microstructural evolution of a C-Mn-Si steel in two-step quenching and partitioning process. Journal of Materials and Environmental Science. 2014;5(6):1988-1993.

4 Arlazarov A, Bouaziz O, Masse JP, Kegel F. Characterization and modeling of mechanical behavior of quenching and partitioning steels. Materials Science and Engineering A. 2015;620:293-300.

5 Putatunda SK. Influence of austempering temperature on microstructure and fracture toughness of a high-carbon, high-silicon and high-manganese cast steel. Materials & Design. 2003;24(6):435-443.

6 Chandler H, editor. Heat treater’s guide: practices and procedures for irons and steels. 2nd ed. Materials Park: ASM International; 1995. 904 p.

7 Rana R, Singh SB. Automotive steels: design, metallurgy, processing and applications. Amsterdam: Elsevier; 2016. 478 p. (Woodhead Publishing Series in Metals and Surface Engineering).

8 Han X, Zhong Y, Yang K, Cui Z, Chen J. Application of hot stamping process by integrating quenching & partitioning heat treatment to improve mechanical properties. Procedia Engineering. 2014;81:1737-1743.

9 Speer JG, Rizzo FC, Matlock DK, Edmonds DV. The “Quenching and partitioning” process: background and recent progress. Materials Research. 2005;8(4):417-423.

10 Speer JG, Edmonds DV, Rizzo FC, Matlock DK. Partitioning of carbon from supersaturated platEs of ferrite, with application to steel processing and fundamentals of the bainite trasnformation. Current Opinion in Solid State and Materials Science. 2004;8:219-237.

11 Koistinen DP, Marburguer RE. A general equation prescribing the extent of the austenite-martensite transformation in pure iron-carbon alloys and plain carbon steels. Acta Metallurgica. 1959;7:59-60.

12 ASTM E8 / E8M-16a, Standard Test Methods for Tension Testing of Metallic Materials, ASTM International, West Conshohocken, PA, 2016

13 Fonstein N. Advanced higt strenght sheet steels: physical metallurgy, design, processing, and properties. New York: Springer; 2015, 396 p.

14 ASTM E1820-16, Standard Test Method for Measurement of Fracture Toughness, ASTM International, West Conshohocken, PA, 2016

15 Acharya PP, Bhat R. Structure-property correlation of quenching and partitioning heat treated silicon-manganese steel. Silicon. 2018. In press.

16 Clarke AJ, Speer JG, Matlock DK, Rizzo FC, Edmonds DV, Santofimia MJ. Influence of carbon partitioning kinetics on final austenite fraction during quenching and partitioning. Scripta Materialia. 2009;61:149-152.

17 Clarke A. Carbon partitioning into austenite from martensite in a silicon-containing high strength sheet steel [thesis]. Golden: Colorado School of Mines; 2006 [cited 2019 Apr 23];34:573-580. Available at: http://hdl.handle.net/11124/170369

18 Jang JH, Bhadeshia HKDH, Suh DW. Solubility of carbon in tetragonal ferrite in equilibrium with austenite. Scripta Materialia. 2013;68:195-198.

19 Bhadeshia HKDH. Carbon in cubic and tetragonal ferrite. Philosophical Magazine. 2013;93(28-30):3417-3429.

20 Edmonds DV, He K, Rizzo FC, De Cooman BC, Matlock DK, Speer JG. Quenching and partitioning martensite: a novel steel heat treatment. Materials Science and Engineering A. 2006;438-440:25-34.

21 Wolfram PC. The microstructural dependence of wear resitance in austenite containing plate steels [thesis]. Golden: Colorado School of Mines; 2013.

5e8337190e88254932a14d48 tmm Articles
Links & Downloads

Tecnol. Metal. Mater. Min.

Share this page
Page Sections