Tecnologia em Metalurgia, Materiais e Mineração
https://tecnologiammm.com.br/article/doi/10.4322/2176-1523.20212451
Tecnologia em Metalurgia, Materiais e Mineração
Artigo Original - Edição Especial “Tributo ao Prof. T. R. Strohaecker”

Quantitative analysis of localized corrosion in tensile armor wire of flexible riser submitted to sweet stress corrosion cracking testing with crevice

Matheus Porto Trindade, Ihana Gabriela Conceição de Jesus, Matheus Mariano da Silva Reis, Brenno Lima Nascimento, Fabricio Pinheiro dos Santos, Sandro Griz

Downloads: 1
Views: 850

Abstract

Failure of flexible risers can occur, among several factors, due to their cold drawn carbon steel tensile armor wires collapse. These wires are susceptible to corrosion by seawater which increases propensity to a synergistic sweet stress corrosion mechanism, when they are associated with CO2 -saturation, high tension, pressure, temperature, and crevices occurrence. In the present study, the influence of crevice in the annular region of flexible risers on the severity of pitting corrosion was quantified. Two different cold drawn carbon steel wires were compared. Corrosion tests by immersion were carried out on wires subjected to three-point bending in synthetic seawater environment at 0.1 MPa, 25 °C and 2 MPa, 60 °C. The crevice occurrence and the internal energy were significant intensifying factors for pitting corrosion, which was demonstrated by the higher frequency and depth of the pittings and by the arrangement of corrosion deposits in crevice assembly samples. The carbon content of the wire did not significantly influence corrosion.

Keywords

Risers; Crevice corrosion; Stress corrosion; Tensile armor wires.

Referências

1 Sertã OB, Longo CEV, Roveri FE. Riser systems for deep and ultra-deepwaters. In: Proceedings of the Offshore Technology Conference; 2001; Texas. Texas: Tex. Technology Transfer; 2001.

2 Håbrekke S, Hokstad P. Ageing and life extension for safety systems on offshore facilities. In: Berenguer C, Grall A, Soares CG. Advances in safety, reliability and risk management. London: CRC Press; 2011. p. 1547-1554.

3 Goldemberg J, Schaeffer R, Szklo A, Lucchesi R. Oil and natural gas prospects in South America: can the petroleum industry pave the way for renewables in Brazil? Energy Policy. 2014;64:58-70.

4 Awadh SM, Al-Mimar H. Statistical analysis of the relations between API, specific gravity and sulfur content in the universal crude oil. International Journal of Scientific Research. 2015;4:1279-1284.

5 Kermani MB, Harrop D. The impact of corrosion on oil and gas industry. SPE Production & Facilities. 1996;11(3):186-190.

6 Kermani B, Harrop D. Corrosion and materials in hydrocarbon production. Newark: John Wiley & Sons; 2019.

7 Bai Y, Bai Q, Ruan W. Advances in pipes and pipelines: flexible pipes. 1st ed. Hoboken: Wiley; 2017. p. 278-315.

8 Bai Y, Bai Q. Subsea engineering handbook. Cambridge: Elsevier; 2010. Overview of subsea engineering; p. 3-25.

9 Drumond GP, Pasqualino IP, Pinheiro BC, Estefen SF. Pipelines, risers and umbilicals failures: a literature review. Ocean Engineering. 2018;148:412-425.

10 Leira B, Berge S, Løtveit S-A, Fergestad D, Langhelle N. Lifetime extension of flexible risers: a generic case study. Offshore Technology Conference; 2015; Texas. Texas: Tex. Technology Transfer; 2015.

11 Nagano H. Pitting and crevice corrosion. Journal of the Society of Materials Science. 1978;27:309-314.

12 Beavers J, Bubenik TA. Stress corrosion cracking. In: Sherik A, El-Sherik AM. Trends in oil and gas corrosion research and technologies. Oxford: Elsevier; 2017. p. 295-314.

13 Hatton S. Effects of high temperature on the design of deepwater risers. Houston, TX: 2H Offshore; 2003.

14 Hua Y, Barker R, Neville A. Understanding the influence of SO2 and O2 on the corrosion of carbon steel in watersaturated supercritical CO2 . Corrosion. 2015;71(5):667-683.

15 Liu Z, Gao X, Du L, Li J, Kuang Y, Wu B. Corrosion behavior of low-alloy steel with martensite/ferrite microstructure at vapor-saturated CO2 and CO2 -saturated brine conditions. Applied Surface Science. 2015;351:610- 623.

16 ArcelorMittal. Guia do aço. São Paulo; 2013.

17 American Society for Metals. Metallography and microstructures of carbon and low-alloy steels. In: Vander Voort GF. Metallography and microstructures. Materials Park: ASM International; 2004. p. 608-626.

18 Tagliari MR, Antunes MR, Santos JGN, Santos FP, Santos JMC, Falcade T, et al. Tensile armor wires submitted to slow strain rate tests in a corrosive environment and cathodic protection: a comparison between two different microstructures. Materials Research. 2019;22(3):e20180465.

19 American Society for Metals. Materials properties handbook: titanium alloys. 1st ed. Materials Park: ASM International; 1994.

20 Li YZ, Guo XP, Zhang GA. Synergistic effect of stress and crevice on the corrosion of N80 carbon steel in the CO2 -saturated NaCl solution containing acetic acid. Corrosion Science. 2017;123:228-242.

21 Li YZ, Xu N, Liu GR, Guo XP, Zhang GA. Crevice corrosion of N80 carbon steel in CO2 -saturated environment containing acetic acid. Corrosion Science. 2016;112:426-437.

22 Yang MZ, Wilmott M, Luo JL. Crevice corrosion behavior of A516-70 carbon steel in solutions containing inhibitors and chloride ions. Thin Solid Films. 1998;326(1-2):180-188.

23 Barker R, Hua Y, Neville A. Internal corrosion of carbon steel pipelines for dense-phase CO2 transport in carbon capture and storage (CCS): a review. International Materials Reviews. 2016;62(1):1-31.

24     Farelas F, Choi YS, Nešić S. Corrosion behavior of API 5L X65 carbon steel under supercritical and liquid carbon dioxide phases in the presence of water and sulfur dioxide. Corrosion. 2013;69(3):243-250.

25 Hu Q, Guo X, Zhang G, Dong Z. The corrosion behavior of carbon steel in CO2-saturated NaCl crevice solution containing acetic acid. Mater Corros. 2012;63(8):720-728.

26 Panossian Z, Cardoso JL. Interpretação de curvas de polarização. In: INTERCORR; 2014; Fortaleza. Fortaleza: ABRACO; 2014.

27 Crolet J-L. Protectiveness of corrosion layers. In: Modelling Aqueous Corrosion; 1993; Plymouth, U.K. Netherlands: Springer; 1994. p. 1-28.

28 Galvele JR. Transport processes and the mechanism of pitting of metals. Journal of the Electrochemical Society. 1976;123(4):464.

29 Kermani MB, Morshed A. Carbon dioxide corrosion in oil and gas production: a compendium. Corrosion. 2003;59(8):659-683.

30 Jasinski R. Corrosion of N80-type steel by CO2 /water mixtures. Corrosion. 1987;43(4):214-218.

31 Sharma SK, Misra AK, Lucey PG, Lentz RCF. A combined remote Raman and LIBS instrument for characterizing minerals with 532nm laser excitation. Spectrochimica Acta. Part A: Molecular and Biomolecular Spectroscopy. 2009;73(3):468-476.

32 Park E, Ostrovski O, Zhang J, Thomson S, Howe R. Characterization of phases formed in the iron carbide process by X-ray diffraction, mossbauer, X-ray photoelectron spectroscopy, and raman spectroscopy analyses. Metallurgical and Materials Transactions. B, Process Metallurgy and Materials Processing Science. 2001;32(5):839-845.

33 Gronebaum RH, Pluschkell W. Investigations on the Iron Carbide Formation Reaction. In: Proceedings of the Conference on “Pre-reduced products and Europe”; 1996; Milan. Milan: AIM; 1996. p. 204-213.

34 Dugstad A, Palencsár S, Berntsen T, Børvik L. Corrosion of steel armour wires in flexible pipes: history effects. In: SPE International Oilfield Corrosion Conference and Exhibition; 2018; Richardson, TX. Texas: Society of Petroleum Engineers; 2018.

35 Berntsen T, Seiersten M, Hemmingsen T. Effect of FeCO3 supersaturation and carbide exposure on the CO2 corrosion rate of carbon steel. Corrosion. 2013;69(6):601-613.


Submetido em:
14/08/2020

Aceito em:
18/01/2021

60954200a95395538f46cbf2 tmm Articles
Links & Downloads

Tecnol. Metal. Mater. Min.

Share this page
Page Sections