Tecnologia em Metalurgia, Materiais e Mineração
https://tecnologiammm.com.br/article/doi/10.4322/2176-1523.20212464
Tecnologia em Metalurgia, Materiais e Mineração
Artigo Original - Edição Especial “Tributo ao Prof. T. R. Strohaecker”

Joining of aluminium alloy and galvanized steel sheets multimaterial assembly using a gas metal arc based process

Atanu Das, Sven-F Goecke, Amitava De

Downloads: 0
Views: 820

Abstract

Fast responsive control of the heat input can minimize thermal distortion and formation of brittle intermetallic phases during gas metal arc-based joining of steel and aluminium multi-material assembly. A detailed experimental investigation and computer-based process modeling are reported here on gas metal arc based joining of automotive aluminium alloy sheets and galvanized steel sheets. The thermal cycles near the actual joint interface and the thermal distortion of the joint assembly are estimated using the computer-based model and validated with the corresponding experimentally measured results. The computed thermal cycles are utilized further to examine the experimentally measured progressive growth of the phase layer and the susceptibility of the brittle intermetallic compounds along the joint interface. Overall, the results show that a precise control of heat input can provide defect-free and dimensionally consistent joint in gas metal arc joining of aluminium to galvanized steel sheets at moderate joining speeds.

Keywords

Gas metal arc joining; Aluminium alloy; Galvanized steel; Thermal distortion.

Referências

1 Das A, Shome M, Goecke SF, De A. Joining of aluminium alloy and galvanized steel using a controlled gas metal arc process. Journal of Manufacturing Processes. 2017;27:179-187.

2 Cao R, Yu G, Chen JH, Wang PC. Cold metal transfer joining of aluminum alloys-to-galvanized mild steel. Journal of Materials Processing Technology. 2013;213:1753-1763.

3 Davis JR. Aluminium and aluminium alloy. 5th ed. Materials Park, Ohio, USA: ASM International; 1994.

4 Das A, Shome M, Das CR, Goecke SF, De A. Joining of galvannealed steel and aluminium alloy using controlled short circuiting gas metal arc welding process. Science and Technology of Welding and Joining. 2015;20:402-408.

5 Kang M, Kim C. Joining Al 5052 alloy to aluminized steel sheet using cold metal transfer process. Materials & Design. 2015;81:95-103.

6 Yang S, Zhang J, Lian J, Lei Y. Welding of aluminum alloy to zinc coated steel by cold metal transfer. Materials & Design. 2013;49:602-612.

7 Zhang H, Liu J. Microstructure characteristics and mechanical property of aluminum alloy/stainless steel lap joints fabricated by MIG welding–brazing process. Materials Science and Engineering A. 2011;528:6179-6185.

8 Goecke SF, Arshad AS, Spiegel EM, De A. Probing current, voltage and metal transfer characteristics in pulsed arc and in conventional and a novel low energy input short arc GMAW. Quarterly Journal of the Japan Welding Society. 2013;31:26s-30s.

9 Goecke SF, Makwana P, Shome M, De A. Probing joint strength and distortion in gas metal arc lap joining of aluminum and steel sheets. Welding in the World. 2019;63:229-236.

10 Sun J, Liu X, Tong Y, Deng D. A comparative study on welding temperature fields, residual stress distributions and deformations induced by laser beam welding and CO2 gas arc welding. Materials & Design. 2014;63:519-530.

11 Das A, De A. Gas metal arc lap joining of aluminium alloys and steel sheets. Journal of Welding and Joining. 2018;36:19-26.

12 Das A, Shome M, Goecke SF, De A. Numerical modelling of gas metal arc joining of aluminium alloy and galvanized steels in lap joint configuration. Science and Technology of Welding and Joining. 2016;26:303-309.

13 Tekriwal P, Mazumder J, Transient and residual thermal strain-stress analysis of GMAW. Journal of Engineering Materials and Techology. 1991;113:336-343.


Submetido em:
18/08/2020

Aceito em:
11/11/2020

606b64e4a953956e78190384 tmm Articles
Links & Downloads

Tecnol. Metal. Mater. Min.

Share this page
Page Sections