Tecnologia em Metalurgia, Materiais e Mineração
https://tecnologiammm.com.br/article/doi/10.4322/2176-1523.20232766
Tecnologia em Metalurgia, Materiais e Mineração
Original Article

Ballistic performance of epoxy composites reinforced with Amazon titica vine fibers

Juliana dos Santos Carneiro da Cunha; Lucio Fabio Cassiano Nascimento; Ulisses Oliveira Costa; André Ben-Hur da Silva Figueiredo; Sergio Neves Monteiro

Downloads: 0
Views: 462

Abstract

Natural fiber-reinforced matrix polymer composites have shown great potential for engineering applications including ballistic protection. However, The Amazon region is full of natural fibers that have not yet been the fully studied and that might have important properties making them more attractive than synthetic fibers. This work presents a novel composite material consisting of titica vine fibers (Heteropsis flexuosa) reinforcing epoxy resin, for possible application in ballistic armor. Composite plates with different volumetric fractions of titica vine fibers (TVF) were subjected to a ballistic test, which consisted of firing multiple shots using .22 LR caliber ammunition. Through the results, it was possible to observe, with statistical validation by Weibull and ANOVA analyses, as well as the Tukey test, that a greater absorption of energy occurred for the conditions of 0 to 20 vol%, but with considerable loss of integrity. On the other hand, the 30 and 40 vol% samples have shown better integrity. In addition, the VL calculated for the samples with the highest percentage of fibers was lower than those found for the composites with 10 and 20 vol%. Thus, the higher the volumetric fraction of TVF, the lower the impact energy absorption capacity. This behavior corroborates the analysis by scanning electron microscopy (SEM) of the fracture surfaces of the composites after the ballistic test. For composites with less than 20 vol% TVF, brittle fractures evidences were observed, responsible for absorbing more impact energy. On the other hand, for other compositions, there was a predominance of complex mechanisms characteristic of ductile fracture, responsible for absorbing less energy, but still maintaining the integrity of the protection.

Keywords

Natural fibers; Titica vine fibers; Composites; Ballistic armor.

Referências

1 Girimurugan R, Pugazhenthi R, Maheskumar P, Suresh T, Vairavel M. Impact and hardness behaviour of epoxy resin matrix composites reinforced with banana fiber/camélia sinensis particle. Materials Today: Proceedings. 2021;39:373-377.

2 Mardin H, Wardana ING, Suprapto W, Kamil K. Effect of sugar palm fiber surface on interfacial bonding with natural sago matrix. Advances in Materials Science and Engineering. 2016;16:1-5.

3 Demosthenes LCC, Nascimento LFC, Monteiro SN, Costa UO, Garcia FC Fo, Luz FS, et al. Thermal and structural characterization of buriti fibers and their relevance in fabric reinforced composites. Journal of Materials Research and Technology. 2020;9:115-123.

4 Reis RHM, Nunes LF, Oliveira MS, Veiga VF Jr, Garcia FC Fo, Pinheiro MA, et al. Guaruman fiber: another possible reinforcement in composites. Journal of Materials Research and Technology. 2020;9:622-628.

5 Souza AT, Junio RFP, Neuba LDM, Candido VS, Silva ACR, Azevedo ARG, et al. Caranan fiber from Mauritiella armata palm tree as novel reinforcement for epoxy composites. Polymers. 2020;12:2037.

6 Demosthenes LCC, Luz FS, Nascimento LFC, Monteiro SN. Buriti fabric reinforced epoxy composites as a novel ballistic component of a multilayered armor system. Sustainability. 2022;14:10591.

7 Reis RHM, Nunes LF, Luz FS, Candido VS, Silva ACR, Monteiro SN. Ballistic performance of guaruman fiber composites in multilayered armor system and as single target. Polymers. 2021;13:1203.

8 Souza AT, Neuba LDM, Junio RFP, Carvalho MT, Candido VS, Figueiredo ABHDS, et al. Ballistic properties and Izod impact resistance of novel epoxy composites reinforced with caranan fiber (Mauritiella armata). Polymers. 2022;14:3348.

9 Queiroz JAL, Gonçalves EG, Rabelo BV, Carvalho ACA, Pereira LA, Cesarino F. Cipó-titica (Heteropsis flexuosa (HBK) GS Bunting): diagnóstico e sugestões para o uso sustentável no Amapá. Macapá: Embrapa Amapá; 2000 [acesso em 18 jun. 2022]. Disponível em: https://ainfo.cnptia.embrapa.br/digital/bitstream/item/81614/1/Cipo-titica- Queiroz.pdf.

10 Soares ML, Mayo SJ, Gribel RA. Preliminar taxonomic revision of Heteropsis (Araceae). Systematic Botany. 2012;38:925-974.

11 Plowden C, Uhl C, Oliveira FA. The ecology and harvest potential of titica vine roots (Heteropsis flexuosa: Araceae) in the eastern Brazilian Amazon. Forest Ecology and Management. 2003;182:59-73.

12 Bentes-Gama MM, Vieira AH, Rocha RB, Silva APFF. Principais espécies arbóreas hospedeiras de cipó-titica (Heteropsis flexuosa) em Rondônia. Circular Técnica. 2007 [acesso em 21 jun. 2022];96:1-4. Disponível em: https://ainfo.cnptia.embrapa.br/digital/bitstream/CPAF-RO-2009-09/12383/1/ct96_cipo-titica.pdf. 

13 Cunha JSC, Nascimento LFC, Luz FS, Garcia FC Fo, Oliveira MS, Monteiro SN. Titica vine fiber (Heteropsis flexuosa): a hidden Amazon fiber with potential applications as reinforcement in polymer matrix composites. Journal of Composites Science. 2022;6:251.

14 Cunha JSC, Nascimento LFC, Luz FS, Monteiro SN, Lemos MF, Silva CG, et al. Physical and mechanical characterization of titica vine (Heteropsis flexuosa) incorporated epoxy matrix composites. Polymers. 2021;13:4079.

15 Luz FS, Lima EP Jr, Louro LHL, Monteiro SN. Ballistic test of multilayered armor with intermediate epoxy composite reinforced with jute fabric. Materials Research. 2015;18:170-177.

16 Neuba LM, Junio RFP, Ribeiro MP, Souza AT, Lima ES, Garcia FC Fo. et al. Promising mechanical, thermal, and ballistic properties of novel epoxy composites reinforced with Cyperus malaccesis sedge fiber. Polymers. 2020;12:1776.

17 Rohen LA, Margem FM, Monteiro SN, Vieira CMF, Araujo MB, Lima ES. Ballistic efficiency of an individual epoxy composite reinforced with sisal fibers in multilayered armor. Materials Research. 2015;18:55-62.

18 Monteiro SN, Louro LHL, Trindade W, Elias CN, Ferreira CL, Lima ES, et al. Natural curaua fiber-reinforced composites in multilayered ballistic armor. Metallurgical and Materials Transactions A. 2015;46:4567-4577.

19 Torres GB, Vélez Restrepo JM. Fractografía y disipación de energía cinética en un panel balístico de cerámica/ polímero sometido al impacto de un proyectil metálico. Matéria. 2013;18:1350-1359.

20 Zwawi M. A review on natural fiber bio-composites, surface modifications and applications. Molecules. 2021;26:404.

21 Callister WD, Rethwisch DG. Ciência e engenharia de materiais: uma introdução. 9th ed. Rio de Janeiro: LTC; 2016.

22 Morye SS, Hine PJ, Duckett RA, Carr DJ, Ward IM. Modelling of the energy absorption by polymer composites upon ballistic impact. Composites Science and Technology. 2000;60:2631-2642.

23 Garcia FC Fo, Oliveira MS, Pereira AC, Nascimento LFC, Matheus JRG, Monteiro SN. Ballistic behavior of epoxy matrix composites reinforced with piassava fiber against high energy ammunition. Journal of Materials Research and Technology. 2020;9:1734-1741.

24 Oliveira MS, Luz FS, Souza AT, Demosthenes LCDC, Pereira AC, Braga FDO, et al. Tucum fiber from Amazon Astrocaryum vulgare palm tree: novel reinforcement for polymer composites. Polymers. 2020;12:2259.

25 Monteiro SN, Pereira AC, Ferreira CL, Lima EP, Weber RP, Assis FS. Performance of plain woven jute fabric-reinforced polyester matrix composite in multilayered ballistic system. Polymers. 2018;10:230.

26 Ribeiro MP, Neuba LM, Silveira PHPM, Luz FS, Figueiredo ABHS, Monteiro SN, et al. Mechanical, thermal and ballistic performance of epoxy composites reinforced with cannabis sativa hemp fabric. Journal of Materials Research and Technology. 2021;12:221-233.

27 Wang L, Kanesalingam S, Nayak R, Padhye R. Recent trends in ballistic protection. Textiles and Light Industrial Science and Technology. 2014;3:37-47.

28 Laffan MJ, Pinho ST, Robinson P, McMillan AJ. Translaminar fracture toughness testing of composites: a review. Polymer Testing. 2012;31:481-489.


Submetido em:
29/06/2022

Aceito em:
27/06/2023

64d28a7ba953957d053cb328 tmm Articles
Links & Downloads

Tecnol. Metal. Mater. Min.

Share this page
Page Sections