Tecnologia em Metalurgia, Materiais e Mineração
https://tecnologiammm.com.br/article/doi/10.4322/tmm.00301008
Tecnologia em Metalurgia, Materiais e Mineração
Artigo Original

VARIAÇÃO DAS PERDAS MAGNÉTICAS DURANTE ENVELHECIMENTO DE UM AÇO ELÉTRICO

VARIATION OF MAGNETIC LOSSES DURING AGING OF AN ELECTRICAL STEEL

Marra, Kleiner Marques; Buono, Vicente Tadeu L.

Downloads: 0
Views: 846

Resumo

Submeteu-se um aço elétrico semiprocessado com teor residual de carbono de 30 ppm e com adições de Al e Si, a diferentes tempos de encharque numa temperatura de 210°C. Foi verificado que a perda magnética histerética aumentou continuamente até 24 h, tendendo a se manter invariável para mais longas exposições. As perdas parasítica e anômala se mostraram insensíveis ao tratamento de envelhecimento. Foi constatado, por atrito interno e microscopia eletrônica de transmissão, que a precipitação de carbono foi responsável pelo fenômeno do envelhecimento. Por microscopia eletrônica de varredura, ficou evidenciado que a evolução do envelhecimento foi acompanhada pelo crescimento da quantidade de carbonetos maiores que 0,1 μm.

Palavras-chave

Aço elétrico, Perda magnética, Envelhecimento magnético

Abstract

An ultra-low carbon steel (30incts soaking times at 210°C. The core loss increased continuously until around 24 h. After such time little modifications were verified. It was found that only the hysteresis loss component changed during the aging treatment. By internal friction and transmission electron microscopy it was seen that carbon precipitation caused the magnetic aging. By scanning electron microscopy it could be concluded that the increase of aging index originated from the enlarging of the number of carbides bigger than 0,1 μm.

Keywords

Electrical steel, Core loss, Magnetic aging

Referências



1 LANDGRAF, F.; CAMPOS, M. F.; TEIXEIRA, J. C.; CONCILIO, G.; MURANAKA, C.; TSCHIPTSCHIN, A. WOLGIEN, V.; ZWIRMAN, N.; CORTES, C. Modelamento das perdas magnéticas de aços elétricos. In: CONGRESSO INTERNACIONAL DE TECNOLOGIA METALÚRGICA E DE MATERIAIS DA ABM, 2., 1997, São Paulo. Anais... São Paulo : ABM, 1997.

2 SLANE, J. A.; LABUN, P. A. The relationship of magnetic properties to carbide distribution in a continuous annealed 2,3% silicon electrical steel. In: THE AMERICAN INSTITUTE OF MINING METALLURGICAL, AND PETROLEUM ENGINEERS. Energy efficient electrical steels. New York, 1981. p.193-204.

3 MARRA, K. M. Cinética de descarbonetação de um aço GNo semiprocessado e sua influência nas propriedades e na susceptibilidade ao envelhecimento magnético. 2002, 283p. Tese (Doutorado em Engenharia Metalúrgica) – Escola de Engenharia da Universidade Federal de Minas Gerais, Belo Horizonte, 2002.

4 BERTOTI, G. Magnetic loss modelling. IEEE Transactions on Magnetics, v. 24, n.1, p.621-630, Jan. 1988.

5 ABE, H. Carbide precipitation during ageing treatments. Scandinavian Journal of Metallurgy, v. 13, n.4, p.226- 239, Apr. 1984.

6 ZHU, A., NEIFE, I.; PINK, E. Characterization of medium and low-temperature carbides in low steel by internal friction. Steel Research, v. 67, n. 11, p.507-512, Nov. 1996.
588696d67f8c9dd9008b4706 1573492069 Articles
Links & Downloads

Tecnol. Metal. Mater. Min.

Share this page
Page Sections