Tecnologia em Metalurgia, Materiais e Mineração
https://tecnologiammm.com.br/article/doi/10.4322/tmm.00701004
Tecnologia em Metalurgia, Materiais e Mineração
Artigo Original

COMPORTAMENTO DO AÇO LÍQUIDO NA REGIÃO DO MENISCO DO MOLDE DE LINGOTAMENTO CONTÍNUO, VIA MODELAGENS FÍSICA E MATEMÁTICA

BEHAVIOR OF LIQUID STEEL AT THE MENISCUS REGION OF A CONTINUOUS CASTING MOLD THROUGH PHYSICAL AND MATHEMATICAL MODELING

Araújo Junior, Ely da Silva; Gasparini, Vitor Maggioni; Silva, Carlos Antonio da; Silva, Itavahn Alves da; Carvalho Filho, Helder Campos de; Mansur, Filipe; Perim, Carlos Alberto; Seshadri, Varadarajan

Downloads: 1
Views: 1027

Resumo

Estuda-se, via modelagens física e matemática, os efeitos da velocidade de lingotamento; geometria do molde; profundidade de imersão; geometria e inclinação dos furos da SEN (Submerged Entry Nozzle) sobre a estabilidade do fluxo de aço na região do menisco do molde de LC e suas possíveis influências sobre a emulsificação metal-escória. Dados experimentais obtidos, via modelagem física, são agrupados por meio do parâmetro F, definido a partir da velocidade de lingotamento, da profundidade de impacto do jato contra a face estreita do molde e do ângulo de saída do jato. Simulações numéricas, via programa CFX, permitem estimar a velocidade subsuperficial para as condições ensaiadas no modelo. A análise dos resultados de modelagem física e matemática permitem identificar as condições de lingotamento ideais, para duas configurações de válvulas submersas.

Palavras-chave

Moldes, Válvula submersa, Turbulência

Abstract

The likely influence of casting velocity, mold geometry and depth of immersion of the SEN, internal geometry and inclination of the ports of the SEN on the stability of the steel flow in the mold of a continuous casting machine have been assessed through mathematical and physical modeling. Experimental data obtained through physical modeling are grouped by means of the F parameter, defined from the values of casting speed, the depth of the impact point of the steel jet against the narrow face and angle of the steel jet. Numerical simulations allow to estimate the subsurface velocity for the test conditions used in the model. The results of physical and mathematical modeling allow the identification of the ideal casting conditions for two nozzle configurations.

Keywords

Mold, Submerged nozzle, Turbulence

Referências

1 SENGUPTA, J.; THOMAS, B. G. Visualizing hook and oscillation mark formation in continuously cast ultra-low carbon steel slabs. JOM-e, Dec. 2006. Disponível em: . Acesso em: 20 dez. 2009.

2 SILVA, C. A. et al. Desenvolvimento de uma metodologia para visualização do fluxo de aço no interior de moldes de lingotamento contínuo, através de modelagem física. In: SEMINÁRIO DE FUSÃO, REFINO E SOLIDIFICAÇÃO DOS METAIS, 31, 2000, Vitória, ES. Anais... São Paulo: ABM, 2000. p. 599-609.

3 THOMAS; B. G.; MIKA, L. J.; NAJJAR, F. M. Simulation of fluid flow inside a continuous slab casting machine. Metallurgical and Materials Transactions B, v. 21, n. 2, p. 387-400, Apr. 1990.

4 THOMAS, B, G. et al. Transient fluid-flow phenomena in the continuous steel-slab casting mold and defect formation. JOM-e, Dec. 2006. Disponível em: . Acesso em: 20 dez. 2009.

5 THOMAS, B. G. Modeling of continuous-casting defects related to mold fluid flow Iron and Steel Technology, v. 3, n. 7, p. 128-43, July 2006.

6 KUBOTA, J. et al. Meniscus flow control in the mold by travelling magnetic field for high speed slab caster. In: CRAMB, A. W.; SZEKERES, E. (Eds.). Mold operation for quality and productivity. Warrendale, Pa: Iron And Steel Society, 1991. p. 7-8.

7 LOFGREN, S. K. P. M.; LEHMAN, A. Improving quality and productivity in thick slab casting by direct control of electromagnetic brake (EMBR). In: INTERNATIONAL CONFERENCE AISE, 2003, Pittsburgh, USA. Proceedings... [S.l.]: Association for Iron & Steel Technology, 2003. p. 977-84

8 THOMAS, B. G.; ZHANG, L. Review: mathematical modeling of fluid flow in continuous casting. ISIJ International, v. 41, n. 10, p. 1181-93, 2001.

588696a87f8c9dd9008b4637 tmm Articles
Links & Downloads

Tecnol. Metal. Mater. Min.

Share this page
Page Sections