Tecnologia em Metalurgia, Materiais e Mineração
https://tecnologiammm.com.br/article/doi/10.4322/tmm.2011.040
Tecnologia em Metalurgia, Materiais e Mineração
Artigo Original

QUANTIFICAÇÃO POR DRX DOS COMPONENTES CARBONOSOS PRESENTES NO PÓ DE BALÃO DO ALTO-FORNO

QUANTIFICATION OF COAL CHAR AND COKE FINES IN THE OFF-GAS BLAST FURNACE SAMPLES BY X-RAY DIFFRACTION

Machado, André da Silveira; Mexias, André Sampaio; Vilela, Antônio Cezar F.; Osório, Eduardo

Downloads: 0
Views: 1113

Resumo

A difração de raios X (DRX) é uma técnica padrão para caracterizar a estrutura cristalina dos materiais. Ela também pode ser utilizada para quantificar o tamanho dos cristalitos (Lc) dos materiais carbonosos. Este trabalho tem por objetivos identificar e quantificar os componentes carbonosos (char e finos de coque) presentes no pó de balão do Alto-forno (AF) pelas técnicas de DRX e de análise elementar de carbono. As partículas coletadas no pó de balão do AF, compostas por char, finos de coque e outros, foram fracionadas e analisadas quimicamente. Posteriormente, as frações foram moídas, desmineralizadas e analisadas por DRX. Amostras de char produzidas em laboratório e coque foram utilizadas como padrões para a quantificação. A técnica utilizada revela as diferenças na dimensão dos cristalitos destes materiais carbonosos, que a estrutura do coque é mais ordenada que a estrutura do char. Com base nessas diferenças podem-se quantificar as proporções de char e finos de coque no pó de balão do AF. A DRX permite quantificar, para o pó de balão em estudo, que 93% da matéria carbonosa se encontra na forma de coque e 7%, na forma de char.

Palavras-chave

Char, Coque, Difração de raios X, Injeção de carvão pulverizado

Abstract

X-ray diffraction (XRD) is a standard technique of characterizing structure of materials. The aim of this work is to identify and quantify carbonaceous components (coal, char and coke fines) in the off-gas blast furnace (BF) through the use of the XRD technique and ultimate analysis. The dust collected in the off-gas BF, which contains char, coke fines, metallic oxides, etc., was fractioned and chemically analyzed. In addition, the fractions were grounded, demineralized and analyzed by ultimate analysis and XRD. This technique reveals differences in crystallite size of the carbonaceous materials. The coke structure shows to be more ordered (bigger Lc) than the char structure. Based on these differences, it is possible to quantify the fines proportions of char and coke in the blast furnace flue dust. The estimated char proportion in the carbonaceous material of the flue dust is 7%.

Keywords

Char, Coke, X-ray diffraction, Pulverized coal injection

Referências

1 CARPENTER. A. M. Use of PCI in blast furnaces. London: IEA Clean Coal Centre, 2006. (CCC/116)

2 BABICH, A. et al Ironmaking. Aachen: Mainz GmbH, 2008.

3 SAHAJWALLA, V. et al Determination of proportions of coal char and coke fines in the off-gas blast furnace samples. In: IRONMAKING CONFERENCE, 59., 2000, Pittsburgh, USA. Proceedings... Warrendale: Iron and Steel Society, 2000. p. 305-11.

4 GUPTA, S. K. et al Atomic structure of coke fines in blast-furnace dust and their origin in operating blast furnaces. In: IRONMAKING CONFERENCE, 62., 2003, Indianápolis, Indiana. Proceedings... Warrendale: Iron and Steel Society, 2003. p. 841-56.

5 RIBAS, M. A. et al Identificação do char no pó de coletor do alto-forno através de técnicas de microscopia. In: XXX SEMINÁRIO DE REDUÇÃO DE MINÉRIO DE FERRO, 30., 1999, Belo Horizonte. Anais… São Paulo: Associação Brasileira de Metalurgia e Materiais, 1999. p. 543-52.

6 YAMAGUCHI, K. et al Test on high-rate pulverized coal injection operation at Kimitsu n.3 blast furnace. ISIJ International, v. 35, n. 2, p. 148-55, Feb. 1995. http://dx.doi.org/10.2355/isijinternational.35.148

7 WU, K. et al. Research on unconsumed fine coke and pulverized coal of bf dust under different PCI rates in BF at Capital Steel Co. ISIJ International, v. 50, n. 3, p. 390-5, Mar. 2010. http://dx.doi.org/10.2355/isijinternational.50.390

8 SAHAJWALLA, V. et al Combustion characteristics of pulverized coals and char released in blast furnace off-gas. In: IRONMAKING CONFERENCE, 62., 2003, Indianápolis, Indiana. Proceedings... Warrendale: Iron and Steel Society, 2003. p. 775-86.

9 SAHAJWALLA, V.; GUPTA S. PCI coal combustion behavior and residual coal char carryover in the blast furnaces of three American steel companies during pulverized coal injection (PCI) at high rates. Washington, DC: American Iron and Steel Institute, 2005.

10 REIS, H. M. B. et al Influência do rank e da composição maceral de carvão pulverizado na eficiência de combustão no raceway do alto-forno. In: SEMINÁRIO DE REDUÇÃO DE MINÉRIO DE FERRO E MATÉRIAS-PRIMAS, 33.; SIMPÓSIO BRASILEIRO DE MINÉRIO DE FERRO, 4., 2003, Ouro Preto, MG, 2003. Anais... São Paulo: Associação Brasileira de Metalurgia e Materiais, 2003. p. 467-76.

11 AMERICAN SOCIETY FOR TESTING AND MATERIALS. ASTM D2013 - Standard practice for preparing coal samples for analysis. West Conshohocken, 2007.

12 AMERICAN SOCIETY FOR TESTING AND MATERIALS. ASTM D5142 – Standard test methods for proximate analysis of the analysis sample of coal and coke by instrumental procedures. West Conshohocken, 2009.

13 AMERICAN SOCIETY FOR TESTING AND MATERIALS. ASTM D4239 – Standard test methods for sulfur in the analysis sample of coal and coke using high-temperature tube furnace combustion methods. West Conshohocken, 2008.

14 AMERICAN SOCIETY FOR TESTING AND MATERIALS. ASTM D5373 – Standard test methods for instrumental determination of carbon, hydrogen, and nitrogen in laboratory samples of coal. West Conshohocken, 2007.

15 LU, L. et al. Quantitative X-ray diffraction Analysis and its application to various coals. Carbon, v. 39, n. 12, p. 1821‑33, Oct. 2001. http://dx.doi.org/10.1016/S0008-6223(00)00318-3

16 WARREN. B. E. X-ray diffraction random layer lattices. Physical Review, v. 59, n. 9, p 693-8, 1941. http://dx.doi. org/10.1103/PhysRev.59.693

588696a67f8c9dd9008b462e tmm Articles
Links & Downloads

Tecnol. Metal. Mater. Min.

Share this page
Page Sections