Tecnologia em Metalurgia, Materiais e Mineração
https://tecnologiammm.com.br/article/doi/10.4322/tmm.2012.006
Tecnologia em Metalurgia, Materiais e Mineração
Artigo Original

AVALIAÇÃO DE ROTA HÍBRIDA APLICADA À REMOÇÃO SELETIVA DE ZINCO CONTIDO NA LAMA DE ACIARIA LD

EVALUATION OF A HYBRID ROUTE FOR THE SELECTIVE REMOVAL OF ZINC FROM BASIC OXYGEN FURNACE SLUDGES

Cantarino, Marcos Vinicius; Cotta, Luiz Cláudio von S.; Mansur, Marcelo Borges

Downloads: 0
Views: 850

Resumo

Uma rota híbrida (pirometalúrgica + hidrometalúrgica) é avaliada na remoção seletiva de zinco presente na lama fina de aciaria LD. A rota consiste das seguintes etapas: i) decomposição térmica da franklinita (ZnO.Fe2O3) contida na lama, na presença de NaOH, ii) lixiviação estagiada da lama fundida em solução de NaOH visando a remoção seletiva de zinco, e iii) lavagem da lama tratada com água para a remoção dos álcalis remanescentes do tratamento. As duas primeiras etapas são avaliadas em três condições operacionais distintas: branda, intermediária e severa. Observa-se que a etapa de decomposição da franklinita é fundamental para garantir elevadas remoções de zinco. Nas condições investigadas, obteve-se, como melhor resultado, uma remoção de 90% de zinco e perda insignificante de ferro, demonstrando que o método é altamente seletivo. A lavagem da lama tratada também se mostra eficaz, com remoção total de sódio e potássio. Assim, alcança-se um enriquecimento de aproximadamente 10 vezes na razão Fe/Zn presente na lama, passando originalmente de 11,6 para 128,8.

Palavras-chave

Lama de aciaria, Zinco, Tratamento de resíduo, Meio ambiente

Abstract

A hybrid (pyro + hydrometallurgical) route is evaluated for the selective removal of zinc from the fine fraction of basic oxygen furnace sludges. The route consists of the following steps: i) thermal decomposition of the franklinite (ZnO. Fe2O3) present in the sludge, in the presence of NaOH, ii) staged leaching of the sludge in NaOH solution in order to selectively remove zinc, and iii) washing of the sludge for the removal of reminiscent alkalis from the treatment. The first two steps are evaluated accordingly to three distinct operating conditions: soft, intermediate and severe. It is verified that the thermal decomposition of franklinite is a crucial step to assure the effective removal of zinc. A maximum of 90% of zinc was removed in the best tested condition with practically no loss of iron content, thus demonstrating that the route is very selective. The washing step is also efficient, with total removal of sodium and potassium. Finally, enrichment around 10 times on the Fe/Zn ratio is obtained, from originally 11.6 to 128.8.

Keywords

Furnace sludge, Zinc, Treatment of wastes, Environmental

Referências

1 SINGH, A. K. P. et al. Recycling of Basic Oxygen Furnace (BOF) sludge in iron and steel works. International Journal of Environmental Technology and Management, v. 14, n. 1-4, p. 19-32, Mar. 2011. http://dx.doi.org/10.1504/ IJETM.2011.039255

2 AGRAWAL, R. K.; PANDEY, P. K. Productive recycling of basic oxygen furnace sludge in integrated steel plant. Journal of Scientific & Industrial Research, v. 64, p. 702-6, Sep. 2005.

3 VIEIRA, C. M. F. et al. Cerâmica vermelha incorporada com lama de aciaria. Revista Matéria, v. 12, n. 2, p. 269-75, 2007.

4 MENDES, J. J. Influência da adição da lamafina de aciaria a oxigênio nas características físicas e microestruturais de pelotas queimadas de minério de ferro. 2009. 79 f. Dissertação (Mestrado em Engenharia Metalúrgica) – Universidade Federal de Ouro Preto, Ouro Preto, 2009.

5 ARCELORMITTAL. Relatório interno sobre usos de lama de aciaria. João Monlevade, MG, 2010.

6 SZEKELY, J. A research program for the minimization and effective utilization of steel plant wastes. Iron and Steelmaker, v. 22, n. 1, p. 25-9, Jan. 1995.

7 CANTARINO, M. V. Estudo da remoção de zinco e de álcalis contidos em lamas de aciaria LD. 2011. 97 f. Dissertação (Mestrado em Engenharia Metalúrgica e de Minas) – Universidade Federal de Minas Gerais, Belo Horizonte, 2011.

8 VOLOVIK, G. A. et al. Investigating the behaviour of alkalis additions in the blast furnace. Steel in USSR, p. 341-3, 1972.

9 NARITA, K. et al. Effects of alkalis and zinc on the wear of blast furnace refractories and the tuyere displacement. ISIJ International, v. 21, n. 12, p. 840-5, 1981. http://dx.doi.org/10.2355/isijinternational1966.21.839

10 ESEZOBOR, D. E.; BALOGUN, S. A. Zinc accumulation during recycling of iron oxides wastes in the blast furnaces. Ironmaking and Steelmaking, v. 33, n. 5, p. 419-25, Oct. 2006. http://dx.doi.org/10.1179/174328106X114020

11 PEREIRA, E. A. C. Emprego de rejeitos siderúrgicos pelotizados na sinterização de minério de ferro. 1982. Dissertação (Mestrado em Engenharia Metalúrgica e de Minas) – Universidade Federal de Minas Gerais, Belo Horizonte, 1982.

12 ELGERSMA, F. et al. Acidic dissolution of zinc ferrite. Hydrometallurgy, v. 29, p. 173-89, 1992. http://dx.doi. org/10.1016/0304-386X(92)90012-O

13 BARRETT, E. C.; NENNIGER, E.H.; DZIEWINSKI, J. A hydrometallurgical process to treat carbon steel electric arc furnace dust. Hydrometallurgy, v. 30, n. 1-3, p. 59-68, June 1992. http://dx.doi.org/10.1016/0304-386X(92)90077-D

14 JHA, M. K.; KUMAR, V.; SINGH, R. J. Review of hydrometallurgical recovery of zinc from industrial wastes. Resources, Conservation and Recycling, v. 33, n. 1, p. 1-22, Aug. 2001. http://dx.doi.org/10.1016/S0921- 3449(00)00095-1

15 DUTRA, A. J. B.; PAIVA, P. R. P.; TAVARES, L. M. Alkaline leaching of zinc from electric arc furnace steel dust. Minerals Engineering, v. 19, n. 5, p. 478-85, Apr. 2006. http://dx.doi.org/10.1016/j.mineng.2005.08.013

16 XIA, D. K.; PICKLES, C. A. Caustic roasting and leaching of electric arc furnace dust. Canadian Metallurgical Quarterly, v. 38, n. 3, p. 175-86, July 1999. http://dx.doi.org/10.1016/S0008-4433(99)00014-2

17 YOUCAI, Z.; STANFORTH, R. Integrated hydrometallurgical process for production of zinc electric arc furnace dust in alkaline medium. Journal of Hazardous Materials, v. 80, n. 1-3, p. 223-40, Dec. 2000. http://dx.doi. org/10.1016/S0304-3894(00)00305-8

18 ASSOCIAÇÃO BRASILEIRA DE NORMAS TÉCNICAS. ABNT NBR 10007:2004: Amostragem de residues sólidos. Rio de Janeiro, 2004.

19 ASSOCIAÇÃO BRASILEIRA DE NORMAS TÉCNICAS. ABNT NBR 10004:2004: Resíduos sólidos: classificação. Rio de Janeiro, 2004.

5886969c7f8c9dd9008b45fd tmm Articles
Links & Downloads

Tecnol. Metal. Mater. Min.

Share this page
Page Sections