Tecnologia em Metalurgia, Materiais e Mineração
https://tecnologiammm.com.br/article/doi/10.4322/tmm.2012.045
Tecnologia em Metalurgia, Materiais e Mineração
Artigo Original

ANÁLISE DA EVOLUÇÃO DO DESEMPENHO DE REFRATÁRIOS MGO-C PARA LINHA DE ESCÓRIA DE PANELA DE AÇO NA USIMINAS IPATINGA

EVOLUTION OF PERFORMANCE OF REFRACTORY LINING FOR THE SLAG LINE OF STEEL LADLES AT USIMINAS IPATINGA

Bastos, Sávia Cristina L. P.; Santos, Fábio Duarte; Caldeira, João Augusto D.

Downloads: 2
Views: 1023

Resumo

A partir de 2008, a Usiminas deu início a um conjunto de ações visando aumentar a vida do revestimento refratário para panelas de aço e impulsionar o desenvolvimento tecnológico nessa área. A limitação do revestimento era o desempenho dos tijolos empregados na linha de escória. Nesse sentido, são apresentados e discutidos os resultados de análises que evidenciam a evolução das principais propriedades de tijolos MgO-C empregados nesta região. A sua caracterização permanente propiciou a seleção daqueles com propriedades mais adequadas para fazer frente às variáveis de processos, além de auxiliar os fabricantes de refratários para o desenvolvimento desses materiais. Estes esforços proporcionaram o aumento médio da campanha do revestimento de aproximadamente 6%, desde o início das ações em 2008, sem aumento de custo.

Palavras-chave

Tijolo refratário, Refratários, Panela de aço, Escória

Abstract

Since 2008, Usiminas has initiated a series of actions aiming to increase the life of the refractory lining for the steel ladles and boost technological development in this area. The limitation of the lining was the performance of the bricks used in the slag line. In this sense, the results of tests that show the evolution of the main properties of MgO-C bricks used in this area are presented and discussed. The permanent characterization has permitted the selection of those with best suited properties for the Usiminas process conditions, and assisted refractory suppliers in the development of these materials. These efforts provided an average increase in the lining campaign about 6%, since the beginning of the actions in 2008, without increase the cost.

Keywords

Refractory brick, Refractories, Steel ladle, Slag

Referências

1 RIGAUD, M. et al. Phase evolution in various carbon-bonded basic refractories. In: UNIFIED INTERNATIONAL TECHNICAL CONFERENCE ON REFRACTORIES, 3., 1993, São Paulo. Proceedings… [S.l.]: Alafar, 1993. p. 36071.

2 CORRÊA FILHO, G. Mecanismo de proteção dos refratários de magnésia-carbono. 1990. 113f. Dissertação (Mestrado em Ciências e Engenharia de Materiais) − Departamento de Engenharia de Materiais, Universidade Federal de São Carlos, São Carlos, 1990.

3 TAKANAGA, S. Wear of magnesia-carbon bricks in BOF. Taikabutsu Overseas, v. 13, n. 4, p. 8-14, 1993.

4 QUINTELA, M. A. et al. A novel methodology for evaluating the oxidation resistance of carbon-containing refractories. Refractories Applications and News, v. 7, n. 1, p. 16-9, Jan. 2002.

5 TAKEUCHI, K.; YOSHIDA, S.; TSUBOI, S. Gas phase oxidation of MgO-C bricks. Journal of the Technical Association of Refractories, v. 23, n. 4, p. 276-9, 2003.

6 ZHANG, S.; MARRIOTT, N. J.; LEE, W. E. Influence of additives on corrosion resistance and corroded microstructures of MgO-C refractories. Journal of the European Ceramic Society, v. 21, n. 13, p. 2393-405, Nov. 2001. http://dx.doi.org/10.1016/S0955-2219(01)00208-4

7 LIPINSKI, T. R.; FICHTNER, R.; BENECKE, T. Study of the oxidation protection of MgO-C refractories by means of boron carbide. Steel Research, v. 63, n. 11, p. 493-5, 1992.

8 YAMAGUCHI, A.; NAKANO, Y.; WANG, T. Effect and behaviour of Al-B-C system antioxidants added to MgO-C refractories. Canadian Metallurgical Quarterly, n. 39, p. 381-6, 2000. http://dx.doi.org/10.1179/000844300794388642

9 HANAGIRI, S. et al. Effects of the addition of metal and CaB6 to magnesia carbon bricks for converters. Taikabutsu Overseas, v. 13, n. 3, p. 20-7, 1993.

10 HAYASHI, S. et al. Behavior of boric compounds added in MgO-C bricks. Taikabutsu Overseas, v. 11, n. 3, p. 12-9, 1991.

11 SURUGA, T. Effect of Mg-B material addition to MgO-C reaction. Taikabutsu Overseas, v. 15, n. 4, p. 25-31, 1995.

12 HASSELMAN, D. P. H. Unified theory of thermal shock, fracture initiation and crack propagation in brittle ceramics. Journal America Ceramic Society, v. 52, n. 11, p. 600-4, Nov. 1969. http://dx.doi.org/10.1111/j.1151-2916.1969. tb15848.x

13 BASTOS, S. C. L. P. et al. Mecanismo de desgaste de refratários para linha de escória de panelas de aço. In: SEMINÁRIO DE ACIARIA, 42., 2011, Salvador. Anais... São Paulo: ABM, 2011.

588696957f8c9dd9008b45de tmm Articles
Links & Downloads

Tecnol. Metal. Mater. Min.

Share this page
Page Sections