Tecnologia em Metalurgia, Materiais e Mineração
https://tecnologiammm.com.br/article/doi/10.4322/tmm.2014.003
Tecnologia em Metalurgia, Materiais e Mineração
Artigo Original

AVALIAÇÃO DAS PROPRIEDADES DE FLUÊNCIA A 600°C DO AÇO MARAGING 300 SOLUBILIZADO*

CREEP PROPERTIES EVALUATION AT 600°C OF MARAGING 300 STEEL SOLUTION TREATED

Reis, Adriano Gonçalves dos; Reis, Danieli Aparecida P.; Abdalla, Antonio Jorge; Otubo, Jorge

Downloads: 0
Views: 982

Resumo

Aços maraging são ligas Ni-Co-Mo-Ti de ultra alta resistência e vasta aplicação, de fundamental interesse no setor aeroespacial em razão de elevada resistência mecânica, aliada a uma excelente tenacidade. Estes aços têm sido propostos para substituir o aço 300 M ou o aço 4340 em partes do veículo lançador de satélites brasileiro (VLS). O aço maraging é formado por uma estrutura martensítica metaestável que pode sofrer reversão para austenita quando aquecidos em temperaturas próximas à temperatura de envelhecimento, sendo esse efeito aumentado com a elevação da temperatura e tempo de tratamento. Sendo assim, o estudo do comportamento em fluência em temperaturas elevadas tem importância tecnológica para o desenvolvimento deste material. Neste trabalho o comportamento em fluência de um aço maraging 300 é avaliado por testes de fluência numa faixa de tensão entre 200 MPa e 500 MPa a 600°C. Os parâmetros de fluência, tais como taxa de fluência no estado secundário (ε·s), tempo final de fluência (tf) e expoente de tensão na fluência secundária (n), são determinados. Estes parâmetros são muito importantes para determinação da resistência à fluência do material.

Palavras-chave

Aço maraging, Fluência, Comportamento mecânico em temperaturas elevadas

Abstract

Maraging steels are alloys with Ni-Co-Mo-Ti with ultra-high resistance and broad application, with fundamental interest in the aerospace sector due to high mechanical resistance combined with a good fracture toughness. This steel has been proposed to replace the steels 300M and 4340 in the Brazilian rocket engine case for Satellite Launcher Vehicles. Maraging steels have a metastable martensitic structure that can revert to austenite when heated in temperatures close to the aging temperature, and this effect can be enhanced with the temperature increasing and time of treatment. Therefore, the study of creep behavior in elevated temperatures has technological importance to the development of this material. In this work the creep behavior of a 300 grade commercial maraging steel solution treated is evaluated by carrying out creep tests at 600ºC and in a stress range of 200 MPa to 500 MPa. Creep parameters, such as steady state creep rate (ε·s), final creep time (tf), and stress exponent from secondary creep (n) are determined, considering that they are important to evaluate the creep resistance of the material.

Keywords

Maraging steel, Creep, Mechanical behavior at high temperature

Referências



1. Viswanathan UK, Kutty TRG, Keswani R, Ganguly C. Evaluation of hot hardness and creep of a 350 grade commercial maraging steel. Journal of Materials Science. 1996;31:2705-09. http://dx.doi.org/10.1007/BF00687304

2. Slunder CJ, Hall AM. The metallurgy, behavior, and application of the 18-percent nickel maraging steels – A survey. Washington: Battelle Memorial Institute to NASA SP-5051; 1968.

3. Rack HJ. Age hardening-grain size relationships in 18Ni maraging steels. Materials Science and Engineering. 1978;34:263-70. http://dx.doi.org/10.1016/0025-5416(78)90058-7

4. Gurewitz G, Atzmon N, Rosen A. Creep and stress relaxation in 18% Ni (250) maraging steel. Metals Technology. 1977;4:62-65. http://dx.doi.org/10.1179/030716977803291962

5. American Society of Testing and Materials International. ASTM3-01-E139: Standard practice for conducting creep, creep-rupture and stress-rupture tests of metallic materials. Philadelphia: ASTM, 1995.

6. Shetty K, Kumar S, Raghothama Rao P. Effect of ion nitriding on the microstructure and properties of Maraging steel (250 Grade). Surface & Coatings Technology. 2009;203:1530-36. http://dx.doi.org/10.1016/j.surfcoat.2008.11.034

7. Carvalho LG. Estudo dilatométrico das transformações de fase em aços maraging M300 e M350 [tese de doutorado]. São Paulo: Escola Politécnica da Universidade de São Paulo; 2012.

8. Selg H, Meka SR, Kachel M, Schacherl RE, Waldenmaier T, Mittemeijer EJ. Nitriding behaviour of maraging steel: experiments and modelling. Journal of Materials Science. 2013;48:4321-35. http://dx.doi.org/10.1007/s10853-013-7248-2

9. Fanton L. Estudo do comportamento mecânico e microestrutural de um aço maraging após soldagem a laser e tratamentos térmicos [dissertação de mestrado]. Guaratinguetá: Universidade Estadual Paulista; 2013.

10. Evang RW, Wilshire B. Introduction to Creep. United Kingdom: Oakdale Printing Company LTD; 1993.

11. Reis AG, Reis DAP, Moura Neto C, Abdalla AJ. Creep evaluation at 200 MPa of maraging 300 alloy. In: Associação Brasileira de Metalurgia, Materiais e Mineração. Anais do 68º Congresso ABM International; 30 maio a 02 agosto 2013; Belo Horizonte, Brazil. São Paulo: ABM; 2013. p. 509-514.

12. Pollock JTA, Barton SG, Clissold RC. The derivation of creep properties from stress relaxation in steels and non-ferrous metals. Materials Science and Engineering. 1981;49:155-71. http://dx.doi.org/10.1016/0025-5416(81)90150-6

13. Campbell JE, Barone FJ, Moon DP. The mechanical properties of the 18-percent nickel maraging steels - Report 198. Battelle Memorial Institute. Washington: Defense Metals Information Center; 1964.

14. Beccaria M, Bernardini M, Braccinia S, Bradaschia C, Cagnoli G, Cascianoa C. et al. The creep problem in the VIRGO suspensions: a possible solution using Maraging steel. Nuclear Instruments and Methods in Physics Research A. 1998;404:455-469. http://dx.doi.org/10.1016/S0168-9002(97)01123-6

15. Abdalla AJ, Carrer IR, Barboza MJR, Baggio-Scheid VH, Moura Neto C, Reis DAP. Estudo de fluência em aços

4340. com diferentes microestruturas e tratamento de carbonitretação a plasma. In: Anais do 19º Congresso Brasileiro de Engenharia e Ciência dos Materiais; 21-25 Nov. 2010; Campos do Jordão, Brasil. Campos do Jordão: CBECiMat; 2010. p. 7139-7146.
588696ea7f8c9dd9008b4767 tmm Articles
Links & Downloads

Tecnol. Metal. Mater. Min.

Share this page
Page Sections