Tecnologia em Metalurgia, Materiais e Mineração
https://tecnologiammm.com.br/article/doi/10.4322/tmm.2014.044
Tecnologia em Metalurgia, Materiais e Mineração
Artigo Original

MANUFATURA DE IMPLANTE CRANIANO CUSTOMIZADO UTILIZANDO IMPRESSÃO 3D E ESTAMPAGEM INCREMENTAL DE CHAPAS

MANUFACTURE OF CUSTOMIZED CRANIAL IMPLANT USING 3D PRINTING, AND, INCREMENTAL SHEET FORMING

Castelan, Javani; Daleffe, Anderson; Fritzen, Daniel; Schaeffer, Lirio

Downloads: 1
Views: 938

Resumo

O objetivo deste trabalho é fabricar modelos físicos de crânios fraturados por impressão 3D e implantes pré-cirúrgicos personalizados em chapa de titânio puro grau 2. A fabricação antecipada do modelo e do implante permite ao cirurgião planejar e diminuir o tempo de cirurgia; a personalização contribui para o resultado estético e funcional do implante, já que considera a anatomia de cada paciente. Metodologia: a partir de imagens DICOM geradas por tomografia computadorizada de um crânio defeituoso, reconstrói-se digitalmente em CAD a parte com defeito e também a reparadora (implante). A fabricação do modelo físico da parte defeituosa é feita por impressão 3D. A fabricação do implante em chapa de titânio puro grau 2 é realizada por estampagem incremental - processo de baixo custo, que utiliza ferramental simples e que permite a fabricação customizada de implantes. As dimensões finais do implante e sua montagem atingiram resultados satisfatórios, indicando a eficiência dos recursos e parâmetros utilizados.

Palavras-chave

Implante, Estampagem incremental, Titânio, Customização

Abstract

The aim of this work is to fabricate physical models of skulls fractured by 3D printing and customized pre-surgical implant in pure titanium sheets. The early manufacturing of model and implant allows the surgeon to plan surgery and reduce the runtime; the personalization contributes to the aesthetic and functional outcome of the implant, since it considers the anatomy of each patient. Methodology: from DICOM images generated by computed tomography of defective skull, both defective and repaired parts are reconstructed digitally in CAD. The fabrication of the physical model of the defective part is made by 3D printing. The manufacture of the implant in titanium sheet grade 2 is performed by incremental sheet forming - low-cost process that uses simple tooling and allows the fabrication of custom implants. The final dimensions of the implant and its assembly achieved satisfactory results, indicating the efficiency of the resources and parameters used.

Keywords

Implant, Incremental forming, Titanium, Customization

Referências



1 Eufinger H, Rasche C, Wehmöller K, Schmieder M, Scholz M, Weihe S, et al. CAD/CAM titanium implantes for cranioplasty - an evaluation of success and quality of life of 169 consecutive implants with regard to size and location. International Congress Series. 2005;1281:827-831. http://dx.doi.org/10.1016/j.ics.2005.03.074.

2 Sun W, Lal P. Recent development on computer aided tissue engineering—a review. Computer Methods and Programs in Biomedicine. 2002;67(2):85-103. http://dx.doi.org/10.1016/S0169-2607(01)00116-X. PMid:11809316

3 Singare S, Dichen L, Bingheng L, Yanpu L, Zhenyu G, Yaxiong L. Design and fabrication of custom mandible titanium tray based on rapid prototyping. Medical Engineering & Physics. 2004;26(8):671-676. http://dx.doi.org/10.1016/j. medengphy.2004.06.001. PMid:15471695

4 Lieger O, Richards R, Liu M, Lloyd T. Computer-assisted design and manufacture of implants in the late reconstruction of extensive orbital fractures. Archives of Facial Plastic Surgery. 2010;12(3):186-191. http://dx.doi. org/10.1001/archfacial.2010.26. PMid:20479435

5 Hou JS, Chen M, Pan CB, Wang M, Wang JG, Zhang B, et al. Application of CAD/CAM-assisted technique with surgical treatment in reconstruction of the mandible. Journal of Cranio-Maxillo-Facial Surgery. 2012;40(8):e432- e437. http://dx.doi.org/10.1016/j.jcms.2012.02.022. PMid:22484124

6 Wang K. The use of titanium for medical applications in the USA. Materials Science and Engineering A. 1996;213(1‑2):134-137. http://dx.doi.org/10.1016/0921-5093(96)10243-4.

7 Azevedo CRF. Microestrutura do titânio e suas ligas para implantes cirúrgicos. Revista Metalurgia e Materiais. 2003;445-447.

8 Moosbrugger C. Atlas of stress-strain curves. 2nd ed. Materials Park: ASM International; 2002.

9 Titanium Information Group. Titanium Alloys in Medical Applications [página da internet]. South Yorkshire: National Metals Technology Centre (NAMTEC), University of Sheffield Advanced Manufacturing Research Centre (AMRC); 2013 [acesso em 29 jun. 2013]. Disponível em: http://www.titaniuminfogroup.co.uk/

10 Martins PAF, Bay N, Skjoedt M, Silva MB. Theory of single point incremental forming. CIRP Annals – Manufacturing Technology. 2008;57(1):247-252. http://dx.doi.org/10.1016/j.cirp.2008.03.047.

11 Castelan J. Estampagem incremental do titânio comercialmente puro para aplicação em implante craniano. [Tese de Doutorado]. Porto Alegre: Escola de Engenharia da UFRGS; 2010.

12 Borsari V, Giavaresi G, Fini M, Torricelli P, Tschon M, Chiesa R, et al. Comparative in vitro study on a ultrahigh roughness and dense titanium coating. Biomaterials. 2005;26(24):4948-4955. http://dx.doi.org/10.1016/j. biomaterials.2005.01.010. PMid:15769530

13 Bertol LS, Escobar CF, Kindlein W Jr, Santos LA, Medeiros EB, Torriani MA, et al. Projeto, fabricação e avaliação de implantes craniofaciais personalizados: proposta de utilização de materiais combinados. Revista Brasileira de Engenharia Biomédica. 2010;26(2):79-89.
588696f37f8c9dd9008b4791 tmm Articles
Links & Downloads

Tecnol. Metal. Mater. Min.

Share this page
Page Sections