Tecnologia em Metalurgia, Materiais e Mineração
https://tecnologiammm.com.br/ed/5b7ebb120e88257b29896e53
Archive
Volume 14, Issue 4, 2017
14(4), 2017
Editorial
Original Article
https://doi.org/10.4322/2176-1523.1105 Tecnol. Metal. Mater. Min., vol.14 n4, 290-295, 2017 STUDY OF THE PRECISION INFLUENCE OF THE SET “PRESS-DEVICE OF HIGH PRESSURE” UNDER THE CONDITIONS OF SYNTHESIS OF SUPERHARD MATERIALS
Bobrovnitchii, Guerold Seerguevitch; Rangel, João Jose de Assis High pressure, Press, Materials, Superhard.
Original Article
https://doi.org/10.4322/2176-1523.1154 Tecnol. Metal. Mater. Min., vol.14 n4, 296-302, 2017 MATHEMATICAL MODEL OF THE NON-DRAG FORCES IN TWO-PHASES FLOW OF RH DEGASSER
Neves, Leonardo; Tavares, Roberto Parreiras RH Degasser, Two-phase flow, Drag force, Non-drag forces, Circulation flow rate.
Original Article
https://doi.org/10.4322/2176-1523.1156 Tecnol. Metal. Mater. Min., vol.14 n4, 303-307, 2017 HIGH-TEMPERATURE INTERGRANULAR OXIDATION OF NI-BASED ALLOYS USING EBSD
Trindade, Vicente Braz; Krupp, Ulrich Intergranular oxidation, Ni-based alloys, EBSD technique, Special grain boundaries, Grain boundary diffusion
Original Article
https://doi.org/10.4322/2176-1523.1190 Tecnol. Metal. Mater. Min., vol.14 n4, 308-318, 2017 ELECTROCHEMICAL AND MECHANICAL BEHAVIOR OF UV CURING PAINT ON HYBRID FILMS MODIFIED WITH POLYETHYLENEGLYCOL PLASTICIZER APPLIED ON TINPLATE
Marcolin, Patrícia; Beltrami, Lilian Vanessa Rossa; Boniatti, Rosiana; Salvador, Débora Guerra; Quevedo, Marcela Citlalim; Bastos, Antonio Alexandre Cunha; Ferreira, Mário Guerreiro Silva; Malfatti, Célia de Fraga; Kunst, Sandra Raquel Hybrid film, PEG, UV curing paint, Corrosion, Tinplate.
Original Article
https://doi.org/10.4322/2176-1523.01202 Tecnol. Metal. Mater. Min., vol.14 n4, 319-325, 2017 NUMERICAL AND EXPERIMENTAL ANALYSIS OF STRENGTH FOR WIRE DRAWING LOW CARBON STEEL
Souza, Vanessa Moura de; Souza, Tomaz Fantin de; Wolfart Júnior, Mário; Rocha, Alexandre da Silva Wire drawing, Computational simulations, Wire drawing strength, Coefficient of friction.
Original Article
https://doi.org/10.4322/2176-1523.1209 Tecnol. Metal. Mater. Min., vol.14 n4, 326-331, 2017 THE USE OF PELLET SCREENINGS IN THE SINTERING PROCESS
Pereira, Helio Cardoso; Souto, Philippe Rocha Santos; Peres, Antônio Eduardo Clark; Ritz, Volker Johan Sintering process, Sinter feed, Iron ore mixtures, Pellet screenings
Original Article
https://doi.org/10.4322/2176-1523.1226 Tecnol. Metal. Mater. Min., vol.14 n4, 332-339, 2017 ADEQUATION OF TOTAL ORGANIC CARBON CONTENT IN THE BAYÓVAR PHOSPHATE ROCK BY OXIDATION AT LOW TEMPERATURE AND EVALUATION OF ITS PERFORMANCE IN PHOSPHORIC ACID PRODUCTION IN CONTINUOUS PILOT PLANT TEST
Silva, Ruberlan Gomes da; Avelar, Angela Nair; Rodrigues, Sérgio Leite; Cerqueira, Roberto Correa; Smith, Paul Anthony; Soares, Wagner Deonizete Phosphate rock, Oxidation, Organic carbon, Bayóvar, Phosphoric acid, Fluidized bed kiln.
Original Article
https://doi.org/10.4322/2176-1523.1245 Tecnol. Metal. Mater. Min., vol.14 n4, 340-348, 2017 INFLUENCE OF THREE SURFACE PRE-TREATMENTS WITH SUBSEQUENT APPLICATION OF POLYESTER INK IN CORROSION RESISTANCE OF AISI 1008 STEEL
Marcolin, Patrícia; Pederiva, Leticia; Salvador, Débora Guerra; Beltrami, Lilian Vanessa Rossa; Oliveira, Claúdia Trindade; Kunst, Sandra Raquel Phosphatization, Silane, Nano-ceramics, Polyester ink, Corrosion.
Original Article
https://doi.org/10.4322/2176-1523.1257 Tecnol. Metal. Mater. Min., vol.14 n4, 349-356, 2017 ASSESSING INTERACTIONS BETWEEN CLUSTERS AND BURDENFEEDERS IN A DIRECT REDUCTION FURNACE USING THE DISCRETE ELEMENT METHOD
Boechat, Fernando de Oliveira; Carvalho, Rodrigo Magalhães de; Tavares, Luís Marcelo Marques DEM, Burdenfeeders, Cluster, Direct reduction
Original Article
https://doi.org/10.4322/2176-1523.1264 Tecnol. Metal. Mater. Min., vol.14 n4, 357-365, 2017 EFFECT OF SHIELDING GAS IN MICROSTRUCTURE AND KINECTICS OF HIGH TEMPERATURE OXIDATION IN AIR OF WELDED JOINTS OF AN AUSTENITIC STAINLESS STEEL THROUGH THE MIG/MAG PROCESS
Vicente, André de Albuquerque; Cabral, Débora Arruda; Espinosa, Denise Crocce Romano; Tenório, Jorge Alberto Soares Stainless steels, Shielding gases, Volume fraction, High temperature oxidation, MIG/MAG.
Original Article
https://doi.org/10.4322/2176-1523.1321 Tecnol. Metal. Mater. Min., vol.14 n4, 366-372, 2017 MATHEMATICAL MODEL FOR DEPHOSPHORIZATION PROCESS OF LIQUID PIG IRON
Motta, Marcus Novaes; Castro, Luiz Fernando Andrade de Dephosphorization of pig iron, Phosphorus partition, Multiple linear regression.
Original Article
https://doi.org/10.4322/2176-1523.1337 Tecnol. Metal. Mater. Min., vol.14 n4, 373-379, 2017 INCORPORATION OF GLASS WOOL WASTE IN CONCRETE
Borges, Paulo Roberto; Junca, Eduardo; Grillo, Felipe Fadin; Telles, Victor Bridi; Oliveira, José Roberto de; Tenório, Jorge Alberto Soares Glass wool waste, Solid waste, Concrete.
Original Article
Tecnol. Metal. Mater. Min.
