https://doi.org/10.4322/tmm.00202000
Tecnol. Metal. Mater., vol.2 n2, 2005 Representatividade Temática Rizzo, Fernando . Editorial

https://doi.org/10.4322/tmm.00202001
Tecnol. Metal. Mater., vol.2 n2, 1-5, 2005 CARBON DISTRIBUTION AND MORPHOLOGICAL ASPECTS OF THE METALLIC IRON GENERATED DURING REDUCTION OF COLD BONDED SELF-REDUCING BRIQUETTES Martins, Karla de Melo; D'Abreu, José Carlos; Noldin Junior, José Henrique Self-reduction, Iron, Carbono, Briquettes Original Article

https://doi.org/10.4322/tmm.00202002
Tecnol. Metal. Mater., vol.2 n2, 6-11, 2005 INFLUENCE OF MELT CONVECTION ON PRIMARY AND SECONDARY DENDRITE SPACINGS OF DOWNWARD UNSTEADY-STATE SOLIDIFICATION OF AI-Cu ALLOYS Rosa, D. M.; Spinelli, J. E.; Ferreira, I. L.; Garcia, A. Solidification, Dendritic spacing, Dendritic growth Original Article

https://doi.org/10.4322/tmm.00202003
Tecnol. Metal. Mater., vol.2 n2, 12-18, 2005 EVALUATION OF WEAR RESISTANCE AND TOUGHNESS IN COLD WORK TOOL STEELS Mesquita, Rafael Agnelli; Barbosa, Celso Antonio Cold working tools steel, Wear resistance, Toughness, Heat treatment Original Article

https://doi.org/10.4322/tmm.00202004
Tecnol. Metal. Mater., vol.2 n2, 19-23, 2005 COMPARATIVE STUDY OF THE MACHINABILITY OF SILICON MACHINED BY ULTRASONIC ABRASION AND ELECTRICAL DISCHARGE MACHINING Brasil, Jorge Francisco C.; Jacomine, Leandro; Arantes, Luciano José; Raslan, Alberto Arnaldo Ultrasonic abrasion, Electro erosion, Silicon Original Article

https://doi.org/10.4322/tmm.00202005
Tecnol. Metal. Mater., vol.2 n2, 24-28, 2005 FREE LIME DETERMINATION IN ELECTRIC ARC FURNACE SLAG AS A CONTRIBUTION TO EVALUATE ITS EXPANSIBILITY Graffitti, Daniela Fernandes; Alves, Claudia Rosane R.; Vilela, Antônio Cezar F.; Moraes, Carlos Alberto M. Slag, Expansion, Free lime Original Article

https://doi.org/10.4322/tmm.00202006
Tecnol. Metal. Mater., vol.2 n2, 29-32, 2005 GRAIN BOUNDARY PINNING IN An AI- I MASS%Mn ALLOY: COMPARISON OF EXPERIMENTS WITH ANALYTICAL MODELS Fonseca, Glaucio Soares da; Rios, Paulo Rangel Grain growth, Particle pinning, Grain boundary curvature Original Article

https://doi.org/10.4322/tmm.00202007
Tecnol. Metal. Mater., vol.2 n2, 33-38, 2005 INVESTIGATION OF THE NITRIDED LAYER EMBRITTLEMENT ON HSS AISI M2 COATED WITH TIN BY CARBIDE PRECIPITATION Kwietniewski, Carlos; Fontana, Walter Andrey; Moraes, Carlos Alberto M.; Heck, Nestor Cezar; Strohaecker, Telmo Roberto Nitriding, Duplex treatment, Computational thermodynamics Original Article

https://doi.org/10.4322/tmm.00202008
Tecnol. Metal. Mater., vol.2 n2, 39-44, 2005 MICROBRASION OF STEAM TREATED SINTERED IRON: ABRASIVE WEAR MECHANISMS Silva Junior, Washington Martins da; Binder, Roberto; Mello, José Daniel Biasoli Micro-abrasion, Sintered iron, Steam treatment Original Article

https://doi.org/10.4322/tmm.00202009
Tecnol. Metal. Mater., vol.2 n2, 45-50, 2005 EVALUATION OF THE PERFORMANCE OF THE BLAST FURNACE OPERATING WITH SELF-REDUCING PELLET USING THE COMPUTATIONAL SIMULATION Castro, José Adilson de; Baltazar, Anderson Willian de S.; Silva, Alexandre José da; D'Abreu, José Carlos; Yag, Jun-Ichiro Self-reducing pellets, Mathematical modeling, Blast furnace Original Article

https://doi.org/10.4322/tmm.00202010
Tecnol. Metal. Mater., vol.2 n2, 51-55, 2005 DEVELOPMENT OF A BLAST FURNACE HEART WEAR MONITORING SYSTEM Pereira, Gilberto Cardoso; Santos, Rodrigo Junqueira dos Blast furnace, Hearth Original Article

https://doi.org/10.4322/tmm.00202011
Tecnol. Metal. Mater., vol.2 n2, 56-60, 2005 EFFECT OF REDUCTANT TYPE ON THE REDUCTION OF CHROMITE FINE ORE Beneduce Neto, Flavio; Takano, Cyro; Mourão, Marcelo Breda Chromite, Carbothermic reduction, Non-isothermal kinetics Original Article

https://doi.org/10.4322/tmm.00202012
Tecnol. Metal. Mater., vol.2 n2, 61-65, 2005 THE SEARCH OF INSTANTANEOUS OPENING OF MOLTEN STEEL FLOW FROM LADLES? THE CASE CST Duarte, João Chiabi; Lacerda, Francisco Alves; Antônio, Iram; Barboza, Josias Marques; Nascimento, Robson A. D.; Barros, Santiago Ruiz; Vita, Ronaldo Aparecido Productivity, Quality, Security, Sealing Original Article