https://doi.org/10.4322/2176-1523.1404
Tecnol. Metal. Mater. Min., vol.14 n4, 289-289, 2017, Publication date August 23, 2018 INDÚSTRIA 4.0 OU A “4ª REVOLUÇÃO INDUSTRIAL” E “TECNOLOGIA E SOBERANIA NACIONAL” Silva, André Luiz Vasconcellos da Costa e Editorial

https://doi.org/10.4322/2176-1523.1105
Tecnol. Metal. Mater. Min., vol.14 n4, 290-295, 2017, Publication date August 23, 2018 STUDY OF THE PRECISION INFLUENCE OF THE SET “PRESS-DEVICE OF HIGH PRESSURE” UNDER THE CONDITIONS OF SYNTHESIS OF SUPERHARD MATERIALS Bobrovnitchii, Guerold Seerguevitch; Rangel, João Jose de Assis High pressure, Press, Materials, Superhard.

Original Article

https://doi.org/10.4322/2176-1523.1154
Tecnol. Metal. Mater. Min., vol.14 n4, 296-302, 2017, Publication date August 23, 2018 MATHEMATICAL MODEL OF THE NON-DRAG FORCES IN TWO-PHASES FLOW OF RH DEGASSER Neves, Leonardo; Tavares, Roberto Parreiras RH Degasser, Two-phase flow, Drag force, Non-drag forces, Circulation flow rate.

Original Article

https://doi.org/10.4322/2176-1523.1156
Tecnol. Metal. Mater. Min., vol.14 n4, 303-307, 2017, Publication date August 23, 2018 HIGH-TEMPERATURE INTERGRANULAR OXIDATION OF NI-BASED ALLOYS USING EBSD Trindade, Vicente Braz; Krupp, Ulrich Intergranular oxidation, Ni-based alloys, EBSD technique, Special grain boundaries, Grain boundary diffusion

Original Article

https://doi.org/10.4322/2176-1523.1190
Tecnol. Metal. Mater. Min., vol.14 n4, 308-318, 2017, Publication date August 23, 2018 ELECTROCHEMICAL AND MECHANICAL BEHAVIOR OF UV CURING PAINT ON HYBRID FILMS MODIFIED WITH POLYETHYLENEGLYCOL PLASTICIZER APPLIED ON TINPLATE Marcolin, Patrícia; Beltrami, Lilian Vanessa Rossa; Boniatti, Rosiana; Salvador, Débora Guerra; Quevedo, Marcela Citlalim; Bastos, Antonio Alexandre Cunha; Ferreira, Mário Guerreiro Silva; Malfatti, Célia de Fraga; Kunst, Sandra Raquel Hybrid film, PEG, UV curing paint, Corrosion, Tinplate.

Original Article

https://doi.org/10.4322/2176-1523.01202
Tecnol. Metal. Mater. Min., vol.14 n4, 319-325, 2017, Publication date August 23, 2018 NUMERICAL AND EXPERIMENTAL ANALYSIS OF STRENGTH FOR WIRE DRAWING LOW CARBON STEEL Souza, Vanessa Moura de; Souza, Tomaz Fantin de; Wolfart Júnior, Mário; Rocha, Alexandre da Silva Wire drawing, Computational simulations, Wire drawing strength, Coefficient of friction.

Original Article

https://doi.org/10.4322/2176-1523.1209
Tecnol. Metal. Mater. Min., vol.14 n4, 326-331, 2017, Publication date August 23, 2018 THE USE OF PELLET SCREENINGS IN THE SINTERING PROCESS Pereira, Helio Cardoso; Souto, Philippe Rocha Santos; Peres, Antônio Eduardo Clark; Ritz, Volker Johan Sintering process, Sinter feed, Iron ore mixtures, Pellet screenings

Original Article

https://doi.org/10.4322/2176-1523.1226
Tecnol. Metal. Mater. Min., vol.14 n4, 332-339, 2017, Publication date August 23, 2018 ADEQUATION OF TOTAL ORGANIC CARBON CONTENT IN THE BAYÓVAR PHOSPHATE ROCK BY OXIDATION AT LOW TEMPERATURE AND EVALUATION OF ITS PERFORMANCE IN PHOSPHORIC ACID PRODUCTION IN CONTINUOUS PILOT PLANT TEST Silva, Ruberlan Gomes da; Avelar, Angela Nair; Rodrigues, Sérgio Leite; Cerqueira, Roberto Correa; Smith, Paul Anthony; Soares, Wagner Deonizete Phosphate rock, Oxidation, Organic carbon, Bayóvar, Phosphoric acid, Fluidized bed kiln.

Original Article

https://doi.org/10.4322/2176-1523.1245
Tecnol. Metal. Mater. Min., vol.14 n4, 340-348, 2017, Publication date August 23, 2018 INFLUENCE OF THREE SURFACE PRE-TREATMENTS WITH SUBSEQUENT APPLICATION OF POLYESTER INK IN CORROSION RESISTANCE OF AISI 1008 STEEL Marcolin, Patrícia; Pederiva, Leticia; Salvador, Débora Guerra; Beltrami, Lilian Vanessa Rossa; Oliveira, Claúdia Trindade; Kunst, Sandra Raquel Phosphatization, Silane, Nano-ceramics, Polyester ink, Corrosion.

Original Article

https://doi.org/10.4322/2176-1523.1257
Tecnol. Metal. Mater. Min., vol.14 n4, 349-356, 2017, Publication date August 23, 2018 ASSESSING INTERACTIONS BETWEEN CLUSTERS AND BURDENFEEDERS IN A DIRECT REDUCTION FURNACE USING THE DISCRETE ELEMENT METHOD Boechat, Fernando de Oliveira; Carvalho, Rodrigo Magalhães de; Tavares, Luís Marcelo Marques DEM, Burdenfeeders, Cluster, Direct reduction

Original Article

https://doi.org/10.4322/2176-1523.1264
Tecnol. Metal. Mater. Min., vol.14 n4, 357-365, 2017, Publication date August 23, 2018 EFFECT OF SHIELDING GAS IN MICROSTRUCTURE AND KINECTICS OF HIGH TEMPERATURE OXIDATION IN AIR OF WELDED JOINTS OF AN AUSTENITIC STAINLESS STEEL THROUGH THE MIG/MAG PROCESS Vicente, André de Albuquerque; Cabral, Débora Arruda; Espinosa, Denise Crocce Romano; Tenório, Jorge Alberto Soares Stainless steels, Shielding gases, Volume fraction, High temperature oxidation, MIG/MAG.

Original Article

https://doi.org/10.4322/2176-1523.1321
Tecnol. Metal. Mater. Min., vol.14 n4, 366-372, 2017, Publication date August 23, 2018 MATHEMATICAL MODEL FOR DEPHOSPHORIZATION PROCESS OF LIQUID PIG IRON Motta, Marcus Novaes; Castro, Luiz Fernando Andrade de Dephosphorization of pig iron, Phosphorus partition, Multiple linear regression.

Original Article

https://doi.org/10.4322/2176-1523.1337
Tecnol. Metal. Mater. Min., vol.14 n4, 373-379, 2017, Publication date August 23, 2018 INCORPORATION OF GLASS WOOL WASTE IN CONCRETE Borges, Paulo Roberto; Junca, Eduardo; Grillo, Felipe Fadin; Telles, Victor Bridi; Oliveira, José Roberto de; Tenório, Jorge Alberto Soares Glass wool waste, Solid waste, Concrete.

Original Article