Tecnologia em Metalurgia, Materiais e Mineração
https://tecnologiammm.com.br/ed/588696807f8c9dd9008b4573
Tecnologia em Metalurgia, Materiais e Mineração



Archive

Volume 4, Issue 1, 2007

4(1), 2007

Original Article

https://doi.org/10.4322/tmm.00401001
JOINT DEVELOPMENT OF BURDEN TO SINTER PLANT AND BLAST FURNACE Pimenta, Hamilton Porto; Castro, Alex André de; Nogueira, Paulo F.; Salles Junior, Antônio Paulo do V.; Oliveira, Dauter de; Oliveira, Humberto L. M. de; Harano, Edson L. Massanori Sinter, Pellets, Blast furnace Original Article
https://doi.org/10.4322/tmm.00401002
QUALITATIVE AND QUANTITATIVE RESULTS OF THE APPLICATION OF FLUX MODIFIERS IN THE TUNDISH OF AÇOS VILLARES - MOGI DAS CRUZES PLANT Carboni, Marcelo Carboneri; Alves, Wender Andrade; Miranda, Marcos Antônio de; Barbosa, Wilson Francisco da S.; Azevedo, Alexandre Silveira de; Santos, Carlos Roberto dos; Bolota, José Roberto Flux modifier, Tundish, Impact pad, Inclusion Original Article
https://doi.org/10.4322/tmm.00401003
IDENTIFICATION OF TENSILE AND COMPRESSIVE STRESS REGIONS IN A BAR UNDER BENDING Carmo, Daniel Chauvierre do; Bittencourt, Marcelo de Siqueira Q.; Gonçalves Filho, Orlando João A.; Lamy, Carlos Alfredo; Payão Filho, João da Cruz Stresses, Bending, Ultrasonics, Acoustic birefringence Original Article
https://doi.org/10.4322/tmm.00401004
UTILIZATION OF SIMULATION TECHNIQUES FOR DEVELOPMENT, TESTING AND VALIDATION OF AUTOMATION PROJECTS Freitas, Eduardo Ferreira de; Fonseca, Marcos de Oliveira; Marques, Rodrigo Madeira Computer simulation, Automation Original Article
https://doi.org/10.4322/tmm.00401005
DYNAMIC AND STATIC SOFTENING OF A MULTIPHASE STEEL WITH Nb AND Ti ADDICTIONS DEFORMED BY HOT TORSION Melo, Tulio Magno F. de Multiphase steel, Static softening, Dynamic softening Original Article
https://doi.org/10.4322/tmm.00401006
APPLICATION ADVANCED CONTROL AT REHEATING FURNACE OF HOT STRIP MILL PLANTS OF USIMINAS Teixeira, Marcos Henrique; Jota, Fábio Gonçalves; Carmo, Rogério Antônio do; Oliveira, Carlos Augusto S. de Reheating furnace, Control, Smith preditor, Temperature control Original Article
https://doi.org/10.4322/tmm.00401007
STEEL CASTING QUALITY IMPROVEMENTS USING EXPERIMENT’S DESIGN FOR HEAVY PARTS PRODUCTION Ribeiro, Luis Gustavo M.; Alves, Luiz Henrique D.; Silva, Messias Borges Design of experiments, Scab, Steel casting Original Article
https://doi.org/10.4322/tmm.00401008
FERROCHROMIUM HIGH CARBON FROM SELF-REDUCING AGGLOMERATES: EFFECT OF Fe-Si Zambrano, Adolfo Pillihuaman; Takano, Cyro; Nogueira, Alberto Eloy A.; Mourão, Marcelo Breda Chromites, Self-reducing agglomerate, Ferrochromium Original Article
https://doi.org/10.4322/tmm.00401009
IMPLEMENTATION OF A SYSTEM FOR SCALING UP THICKENERS Schneider, Claudio Luiz; Alves, Vladimir; Gobbo, Oliver; Gonçalves, Keila Thickener, Sedimentation, Scale up, Simulation Original Article
https://doi.org/10.4322/tmm.00401010
INFLUENCE OF TEMPERING ON THE WEAR RESISTANCE OF VD2 STEEL Bressan, José Divo; Gilapa, Leonidas M.; Daros, Deivid Paganini Wear test, Tool steel, Heat treatment Original Article
https://doi.org/10.4322/tmm.00401011
APPLICATION OF CLEANER PRODUCTION PROGRAM TOOLS IN THE WASTE MANAGEMENT OF A FOUNDRY COMPANY Moraes, Carlos Alberto M.; Gaspar, Rodrigo; Rocha, Lisiane Kleinkauf; Brehm, Feliciane Andrade; Garcia, Ana Cristina Foundry, Minimization, Waste, Cleaner production Original Article

Tecnol. Metal. Mater. Min.

Share this page
Page Sections