https://doi.org/10.4322/tmm.00402001
Tecnol. Metal. Mater., vol.4 n2, 1-5, 2007 USING THE DYNAMIC TRAIN WEIGHING-MACHINE AT COSIPA Costa Filho, Arthur Jacinto da; Tetti, Ulisses; Madarazzo, Sidney Weighing, Reliability, Cost reduction, Optimization Original Article

https://doi.org/10.4322/tmm.00402002
Tecnol. Metal. Mater., vol.4 n2, 6-11, 2007 A STUDY OF CARBON PROFILE IN THE NITRIDED LAYER OF AISI M2 STEEL Tier, Marco Antônio D.; Kieckow, Flávio; Strohaecker, Telmo Roberto; Rocha, Alexandre da Silva; Santos, Jorge Fernandez dos; Bell, Thomas Plasma nitriding, Nitrided layer, Decarburization Original Article

https://doi.org/10.4322/tmm.00402003
Tecnol. Metal. Mater., vol.4 n2, 12-16, 2007 PRELIMINARY STUDIES ON THE SINTERING OF CUBIC BORON NITRIDE USING TITANIUM-BASED BINDERS Valpassos, Juliana Moura; Ramalho, Alan Monteiro; Bobrovnitchii, Guerold; Monteiro, Sérgio Neves Cubic boron nitride, Sintering, Titanium Original Article

https://doi.org/10.4322/tmm.00402004
Tecnol. Metal. Mater., vol.4 n2, 17-20, 2007 REDUCTION OF ANGULAR DISTORTION IN WELD BEAD IN LOW ALLOY STEEL WITH THE USING OF FORCED REFRIGERATION OF THE WELD POOL Miranda, Leonardo Horta; Bracarense, Alexandre Queiroz Angular distortion, Thermal tension, Cooling Original Article

https://doi.org/10.4322/tmm.00402005
Tecnol. Metal. Mater., vol.4 n2, 21-26, 2007 CORROSION RESISTANCE OF PHOSPHATIZED AND PAINTED ELECTROGALVANIZED STEELS Alvarenga, Evandro de Azevedo; Moreira, José Geraldo; Buono, Vicente Tadeu L. Corrosion resistance, Electrogalvanizing, Painting, Formability Original Article

https://doi.org/10.4322/tmm.00402006
Tecnol. Metal. Mater., vol.4 n2, 27-32, 2007 EFFECT OF PIN AND HOLE GEOMETRY ON THE FRICTION HYDRO PILLAR PROCESSING – PRELIMINARY RESULTS Jardim, Maíra Prata; Gonçalves, Rafael Ariza; Paes, Marcelo Torres P.; Pires, Raphael Rezende; Franco, Vera Lucia D. S.; Franco, Sinésio Domingues Friction hydro pillar processing, Geometry, Stud Original Article

https://doi.org/10.4322/tmm.00402007
Tecnol. Metal. Mater., vol.4 n2, 33-38, 2007 COVERED ELECTRODE ROBOTIC WELDING WITH ARC LENGTH CONTROL USING COMPENSATION OF DROP VOLTAGE ALONG THE ELECTRODE AS A FUNCTION OF TEMPERATURE Lima II, Eduardo José; Bracarense, Alexandre Queiroz Shielded metal arc welding, Robotization, Control Original Article

https://doi.org/10.4322/tmm.00402008
Tecnol. Metal. Mater., vol.4 n2, 39-44, 2007 MARKETING AND INNOVATION: THE INFLUENCE OF DEVELOPMENT NEW PRODUCT MANAGEMENT IN THE SUCCESS OF INNOVATIONS INTO METALLURGICAL SECTOR Turani, Leonardo de Oliveira; Tais, Ed Juarez M. Development products, Marketing, Innovation Original Article

https://doi.org/10.4322/tmm.00402009
Tecnol. Metal. Mater., vol.4 n2, 45-49, 2007 AVALIAÇÃO DO MANGANÊS EM ACIARIA A OXIGÊNIO Barão, Celso Dias; Silva, Carlos Antonio da; Duarte, João Chiabi Converter, Manganese Original Article

https://doi.org/10.4322/tmm.00402010
Tecnol. Metal. Mater., vol.4 n2, 50-55, 2007 CHROMIUM RECOVERY FROM STAINLESS STEELMAKING DUSTS AND SLUDGES - IMPORTANCE OF THE BASICITY Nolasco Sobrinho, Pedro José; Tenório, Jorge Alberto S. Wastes, Chromium, Dust, Sludge, Steel plant Original Article

https://doi.org/10.4322/tmm.00402011
Tecnol. Metal. Mater., vol.4 n2, 56-62, 2007 STRUCTURAL CHARACTERIZATION OF Ti-18Si-6B AND Ti-7.5Si-22.5B ALLOYS PROCESSED BY HIGH-ENERGY BALL MILLING AND HOT PRESSING Fernandes, Bruno Bacci; Ramos, Alfeu Saraiva; Moura Neto, Carlos de ; Melo, Francisco Cristovão L. de; Fernandes, Paulino Bacci High-energy ball milling, Alloys, Titanium Original Article