https://doi.org/10.4322/2176-1523.1402
Tecnol. Metal. Mater. Min., vol.14 n2, 2017 DISSEMINAÇÃO DE CONHECIMENTO: NOSSO COMPROMISSO Barbosa Filho, Horacidio Leal Editorial

https://doi.org/10.4322/2176-1523.0883
Tecnol. Metal. Mater. Min., vol.14 n2, 100-106, 2017 STUDY OF THE EMULSIFIER BASED ON SOYBEAN OIL SLUDGE IN SYNTHETIC DRILLING FLUID TO N-PARAFFIN BASE Leal, Caline Alves; Souza, Roberta Cristina Rocha de; Balaban, Rosângela de Carvalho; Amorim, Luciana Viana Emulsifier, Emulsions, Synthetic drilling fluids.

Original Article

https://doi.org/10.4322/2176-1523.1079
Tecnol. Metal. Mater. Min., vol.14 n2, 107-118, 2018 EVALUATION OF BIOTECNOLOGICAL POTENCIAL FOR TREATING OF A ONE GOLD ORE FROM A MINE OF AMAPÁ STATE Grangeiro, Luana Cardoso; Bevilaqua, Denise; Oliveira, Kleber Bittencourt; Palmieri, Mauricio Cesar; Macêdo, Emanuel Negrão Gold ore, Acidithiobacillus, Biooxidation, Cyanidation.

Original Article

https://doi.org/10.4322/2176-1523.1139
Tecnol. Metal. Mater. Min., vol.14 n2, 119-124, 2018 SIMPLE METHOD FOR DETERMINATION OF THE RESIDENCE TIME DISTRIBUTION OF POLYMERS IN EXTRUDER FROM LUMINANCE MEASUREMENTS Silva, Daniel José da; Yoshida, Satoru; Takimoto, Herick Garcia; Bizzo, Maurizio André; Kimura, Vanessa Tiemi; Santos, Emerson Roberto dos; Wang, Shu Hui Extrusion, Residence time distribution, Luminance, Polymers.

Original Article

https://doi.org/10.4322/2176-1523.1140
Tecnol. Metal. Mater. Min., vol.14 n2, 125-132, 2018 TECHNOLOGICAL CHARACTERIZATION OF SOME LITHOTYPES OF ESPÍRITO SANTO AND NORTHEAST AND THEIR APPLICATION AS ORNAMENTAL ROCKS Oliveira, Glenda Aparecida Rodrigues de; Oliveira, Felisbela Maria da Costa; Araújo, Alinne Marianne Martins; Barros, Márcio Luiz de Siqueira Campos  Ornamental rock, Characterization, Application, Physical indices.

Original Article

https://doi.org/10.4322/2176-1523.1141
Tecnol. Metal. Mater. Min., vol.14 n2, 133-140, 2018 SLIDING WEAR BEHAVIOR OF NIOBIUM CARBIDE COATED AISI 52100 BEARING STEEL Krelling, Anael Preman; Milan, Julio César Giubilei; Costa, César Edil da; Almeida, Elisangela Aparecida dos Santos; Galiotto, Alexandre Sliding wear, Steel, Niobium carbide coating, Friction

Original Article

https://doi.org/10.4322/2176-1523.1145
Tecnol. Metal. Mater. Min., vol.14 n2, 141-147, 2018 ESTIMATING PHASE FRACTION IN A MULTIPHASE STEEL THROUGH MEASURES OF SATURATION MAGNETIZATION Valdebenito, Daniel Fevereiro; Nishikawa, Arthur Seiji; Lancarotte, Marcelo Shiroma; Goldenstein, Hélio Multiphase steels, Saturation magnetization, Phases fraction.

Original Article

https://doi.org/10.4322/2176-1523.1160
Tecnol. Metal. Mater. Min., vol.14 n2, 148-152, 2017 RHEOLOGY APPLIED TO A FRICTION FACTOR SIMULATION FOR CONFINED DISPOSAL OF KAOLIN BY CHURCHILL MODELS AND SWAMEE-JAIN Silva, André Luis Mileo Ferraioli; Mesquita, Andre Luiz Amarante; Felipe, Augusta Maria Paulain Ferreira; Souza, José Antônio da Silva  Kaolin suspension, Rheology, Friction factor.

Original Article

https://doi.org/10.4322/2176-1523.1170
Tecnol. Metal. Mater. Min., vol.14 n2, 153-158, 2017 AN EXPERIMENTAL METHOD TO SIMULATE THE HOT STAMPING PROCESS Olah Neto, André; Verran, Guilherme Ourique; Dutra, Rodinei Rocha Hot stamping, 22MnB5 steel, Quenching, Cooling rate.

Original Article

https://doi.org/10.4322/2176-1523.1172
Tecnol. Metal. Mater. Min., vol.14 n2, 159-166, 2017 TECHNOLOGICAL ROUTES FOR THE PRODUCTION OF FERROCHROME IN BRAZIL: A STUDY OF TECHNICAL, ECONOMICAL AND FINANCIAL VIABILITY Rocha, Marcelo; Figueiredo, Paulo Soares Energy efficiency, Ferrochrome, Submerged arc furnace, Electrointensive industry

Original Article

https://doi.org/10.4322/2176-1523.1182
Tecnol. Metal. Mater. Min., vol.14 n2, 167-174, 2017 EFFECT OF DIFFERENT HEAT TREATMENTS ON MICROSTRUCTURE AND MICROHARDNESS OF A C-Mn STEEL/INCONEL 625 COATING SYSTEM Inconel 625 overlay/C-Mn steel, Microhardness profile, Phase transformation, Tempered martensite, HAZ, Heat treatments.

Original Article

https://doi.org/10.4322/2176-1523.1184
Tecnol. Metal. Mater. Min., vol.14 n2, 175-182, 2017 QUANTITATIVE IMAGE ANALYSIS FOR CHARACTERIZATION OF GOLD OCCURENCE AND ASSOCIATION Costa, Fabrizzio Rodrigues; Nery, Guilherme Pinho; Ulsen, Carina; Uliana, Daniel; Contessotto, Renato; Tassinari, Maria Manuela Maia Lé; Kahn, Henrique Technological characterization, Automated image analysis, Gold ore.

Original Article

https://doi.org/10.4322/2176-1523.1198
Tecnol. Metal. Mater. Min., vol.14 n2, 183-189, 2017 DEVELOPMENT AND VALIDATION OF GRAPHITIC CARBON ANALYSIS OF GRAPHITE ORE SAMPLES Ribeiro, Tamara Mariana Guilherme; Brandão, Paulo Roberto Gomes Graphite, Graphitic carbon, Analysis, Method.

Original Article