https://doi.org/10.4322/2176-1523.1203
Tecnol. Metal. Mater. Min., vol.12 n3, 177, 2015 EDITORIAL Beneduce Neto, Flavio . Editorial

https://doi.org/10.4322/2176-1523.0781
Tecnol. Metal. Mater. Min., vol.12 n3, 179-187, 2015 EFFECT OF CONTENT OF MOLYBDENUM ON THE PRECIPITATION HARDENING CURVES AND ON THE HIGH TEMPERATURE OXIDATION RESISTANCE OF ULTRA HIGH MECHANICAL STRENGTH MARAGING STEELS Vicente, André de Albuquerque; Brandi, Sérgio Duarte; Padilha, Angelo Fernando Maraging, Precipitation hardening, Oxidation, High temperature. Original Article

https://doi.org/10.4322/2176-1523.0793
Tecnol. Metal. Mater. Min., vol.12 n3, 188-194, 2015 USE WASTE MARBLE AND CALCIUM ALUMINATE IN SYNTHETIC SLAG AT THE STEEL DESULFURIZATION PROCESS Coleti, Jorge Luís; Grillo, Felipe Fadin; Silva, Felipe Lima e; Oliveira, José Roberto de; Espinosa, Denise Crocce Romano; Tenório, Jorge Alberto Soares Marble waste, Synthetic slag, Desulfurization. Original Article

https://doi.org/10.4322/2176-1523.0809
Tecnol. Metal. Mater. Min., vol.12 n3, 195-201, 2015 EFFECT OF HOT DIP GALVANIZED COATINGS AT COEFFICIENT OF FRICTION OF DUAL PHASE STEEL SUPPLIED FOR THE AUTOMOTIVE INDUSTRY Silveira, Claudeir Carvalho; Oliveira, Carlos Augusto S. de; Silva Filho, Jose Francisco da; Suski, Cassio Aurélio; Novicki, Nilceu Dual phase steel, Galvanizing (GI), Galvannealed (GA), Wear. Original Article

https://doi.org/10.4322/2176-1523.0828
Tecnol. Metal. Mater. Min., vol.12 n3, 202-210, 2015 BALL WEAR INFLUENCE AT THE CAPS FORMATION IN THE MICRO‑ABRASIVE WEAR TESTING BY BALL-CRATERING Cozza, Ronaldo Câmara Ball-cratering wear test, Abrasive wear, Ball wear. Original Article

https://doi.org/10.4322/2176-1523.0838
Tecnol. Metal. Mater. Min., vol.12 n3, 211-215, 2015 SYNTHESIS OF WC-12wt%Co NANOCOMPOSITES BY HIGH ENERGY BALL MILLING AND THEIR MORPHOLOGICAL CHARACTERIZATION Guaglianoni, Waleska Campos; Takimi, Antonio; Vicenzi, Juliane; Bergmann, Carlos Pérez High energy ball milling, WC-12wt%Co, Nanocomposites, Microstructure. Original Article

https://doi.org/10.4322/2176-1523.0887
Tecnol. Metal. Mater. Min., vol.12 n3, 216-221, 2015 LASER INDUCED – BREAKDOWN SPECTROSCOPY FOR QUANTITATIVE Sn AND Nb ANALYSIS IN Zr BASED ALLOYS Iofrida, Martín; Carricondo, Juan; Ararat, Carlos; Iribarren, Manuel; Corvalán, Carolina LIBS, ZrSn and ZrNb alloys, Calibration curves, Nuclear. Original Article

https://doi.org/10.4322/2176-1523.0535
Tecnol. Metal. Mater. Min., vol.12 n3, 222-227, 2015 APPLICATION OF THE PLASTICITY ELEMENTARY THEORY (TEP) IN THE CLOSED DIE FORGING Corrêa, Fábio Junkes; Schaeffer, Lirio Forging, Closed die, Plasticity Elementary Theory. Original Article

https://doi.org/10.4322/2176-1523.0876
Tecnol. Metal. Mater. Min., vol.12 n3, 228-236, 2015 PRESS HARDNING TECHNOLOGY AND THEIR RELATIONSHIP WITH DEVELOPMENT AND FABRICATION OF PRODUCTS Diogo, Cláudio Pereira; Cruz, Ronaldo Aparecido Souza; Morais, Willy Ank de Steels, Autoparts, Inovarauto, Hot stamping, Boron steel, 22MnB5. Original Article

https://doi.org/10.4322/2176-1523.0770
Tecnol. Metal. Mater. Min., vol.12 n3, 237-243, 2015 CYCLIC OXIDATION OF FERRITIC STAINLESS STEEL AISI 409 Rodrigues, Samara Clotildes Saraiva; Santos, Diego Machado dos; Brandim, Ayrton de Sá; Silva, Maura Célia Cunha e; Lins, Vanessa de Freitas C.; Salgado, Maria de Fátima Ferritic stainless steel AISI 409, Corrosion, Condensed, Cyclic oxidation. Original Article

https://doi.org/10.4322/2176-1523.0832
Tecnol. Metal. Mater. Min., vol.12 n3, 244-250, 2015 MINERAL TECHNOLOGY FOR COAL COMBUSTION ASHES FROM BAIXO JACUÍ-RS COAL AREA Sabedot, Sydney; Sundstron, Marcelo Garcia; Miltzarek, Gerson Luis; Sampaio, Carlos Hoffmann Mineral technology, Coal ash, Bottom ash, Fly ash. Original Article

https://doi.org/10.4322/2176-1523.0896
Tecnol. Metal. Mater. Min., vol.12 n3, 251-256, 2015 TECHNOLOGICAL CHARACTERIZATION OF “EXOTIC FUJI” GRANITE FOR ORNAMENTAL USES Araújo, Alinne Marianne Martins; Sousa, Antônio Augusto de; Feitosa, Maria Carolina de Albuquerque; Oliveira, Glenda Aparecida Rodrigues de Ornamental rocks, Technological characterization, Pegmatite, Granite. Original Article

https://doi.org/10.4322/2176-1523.0844
Tecnol. Metal. Mater. Min., vol.12 n3, 257-264, 2015 ON THE MECHANISMS OF PLASMA NITRIDING OF MARTENSITIC STAINLESS STEEL AISI 420 AT LOW AND HIGH TEMPERATURE Pinedo, Carlos Eduardo; Magnabosco, Rodrigo Plasma nitriding, Martensitic stainless steel, Expanded martensite, Hardening. Original Article