https://doi.org/10.4322/tmm.2014.053
Tecnol. Metal. Mater. Min., vol.11 n4, 275-275, 2014, Publication date December 17, 2014 MATERIAIS - PEÇA ESTRATÉGICA PARA O DESENVOLVIMENTO E POSICIONAMENTO DAS NAÇÕES Silva, André Luiz V. da C. e . Editorial

https://doi.org/10.4322/tmm.2014.045
Tecnol. Metal. Mater. Min., vol.11 n4, 277-286, 2014, Publication date December 17, 2014 CORRELATION BETWEEN MICROSTRUCTURE AND MECHANICAL AND CORROSION RESISTANCES OF A LEAD-FREE Sn-0,7%Cu SOLDER ALLOY Spinelli, J. E.; Cheung, Noé; Osório, Wislei Riuper Ramos; Freitas, Emmanuelle Sá; Garcia, Amauri Sn-Cu alloy, Solidification, Mechanical properties, Corrosion Original Article

https://doi.org/10.4322/tmm.2014.051
Tecnol. Metal. Mater. Min., vol.11 n4, 287-295, 2014, Publication date December 17, 2014 STUDY ON SOFTENING AND DROPPING PROPERTIES OF METALIZED BURDEN INSIDE BLAST FURNACE Tuo, Bi-yang; Wu, Sheng-li; Zhang, Li-hua; Wu, Jian-Long; Sun, Ying Iron-bearing burden, Metallization rate, Softening-melting dropping properties, Blast furnace. Original Article

https://doi.org/10.4322/tmm.2014.040
Tecnol. Metal. Mater. Min., vol.11 n4, 296-303, 2014, Publication date December 17, 2014 USE OF THERMODYNAMIC MODELLING TO THE PROCESS OPTIMIZATION AND DEVELOPMENT OF NEW ALLOYS Farina, Alexandre Bellegard; Bacalhau, José Britti; Frota Junior, Roberto Tiburcio Canito; Netto de Souza, Eduardo; Mantovani, Mario Cesar; Sokolowski, Alexandre; Barbosa, Celso Antonio Numerical modeling, Thermodynamic simulations, Specialty steels, Specialty alloys Original Article

https://doi.org/10.4322/tmm.2014.041
Tecnol. Metal. Mater. Min., vol.11 n4, 304-310, 2014, Publication date December 17, 2014 SILICON REFINING BY VACUUM TREATMENT Lotto, André Alexandrino; Ferreira Neto, João Batista; Mourão, Marcelo Breda Purification, Silicon, Vacuum, Phosphorus Original Article

https://doi.org/10.4322/tmm.2014.043
Tecnol. Metal. Mater. Min., vol.11 n4, 311-315, 2014, Publication date December 17, 2014 ARE THERE SIGNIFICANT DIFFERENCES BETWEEN DIRECT AND REVERSE GRINDING CIRCUITS? Mazzinghy, Douglas Batista; Schneider, Claudio Luiz Grinding, Direct circuit, Reverse circuit, Simulation Original Article

https://doi.org/10.4322/tmm.2014.044
Tecnol. Metal. Mater. Min., vol.11 n4, 316-325, 2014, Publication date December 17, 2014 MANUFACTURE OF CUSTOMIZED CRANIAL IMPLANT USING 3D PRINTING, AND, INCREMENTAL SHEET FORMING Castelan, Javani; Daleffe, Anderson; Fritzen, Daniel; Schaeffer, Lirio Implant, Incremental forming, Titanium, Customization Original Article

https://doi.org/10.4322/tmm.2014.046
Tecnol. Metal. Mater. Min., vol.11 n4, 326-331, 2014, Publication date December 17, 2014 INFLUENCE OF TEXTURE AND MINERALOGY IN APPARENT POROSITY, WATER ABSORPTION AND APPARENT DENSITY OF IGNEOUS ROCKS Meyer, Ana Paula; Zanon, Marcela Lopes; Artur, Antonio Carlos; De Oliveira, Nubia Ponce Leão de Physical indices, Granitoids, Characteristics petrographic Original Article

https://doi.org/10.4322/tmm.2014.047
Tecnol. Metal. Mater. Min., vol.11 n4, 332-339, 2014, Publication date December 17, 2014 ESTUDO MICROESTRUTURAL E MECÂNICO DE LIGAS DE ALUMÍNIO SUBMETIDAS A DISTINTOS TEMPOS DE SOLUBILIZAÇÃO Monteiro, Valmir Martins; Diniz, Saulo Brinco; Meirelles, Bruna Godoi; Da Silva, Luis Celso; Paula, Anderson dos Santos Alumínio, Microestrutura, Laminação a quente, Tratamento térmico de solubilização Original Article

https://doi.org/10.4322/tmm.2014.048
Tecnol. Metal. Mater. Min., vol.11 n4, 340-345, 2014, Publication date December 17, 2014 EVALUATION OF FLOW DISTRIBUTION IN THE PELLETIZING FURNACE THROUGH CFD AND EXPERIMENTAL VALIDATION AT SAMARCO Athayde, Maycon; Tavares, Roberto Parreiras; Nunes, Sergio Fernando; Fonseca, Mauricio Cota Modeling, CFD, Pelletizing, Packed beds Original Article

https://doi.org/10.4322/tmm.2014.050
Tecnol. Metal. Mater. Min., vol.11 n4, 346-354, 2014, Publication date December 17, 2014 DIRECT REDUCTION OF HEMATITE POWDERS VIA COLD HYDROGEN PLASMA Silveira, Iraldo de Sá; Vieira, Estéfano Aparecida; Nascimento, Ramiro da Conceição; Franco Junior, Adonias Ribeiro Direct reduction, Hematite, Hydrogen plasma, Activation energy Original Article

https://doi.org/10.4322/tmm.2014.049
Tecnol. Metal. Mater. Min., vol.11 n4, 355-362, 2014, Publication date December 17, 2014 INFLUENCE OF POTASSIUM SALTS AS INHIBITORS OF SHALE SWELLING IN THE PERFORMANCE OF POLYMER DRILLING FLUIDS Lucena, Danielly Vieira de; Souto, Carlos Magno Rocha A.; Lira, Hélio de Lucena; Amorim, Luciana Viana Polymer fluids, Reactive formation, Swelling inhibitors Original Article

https://doi.org/10.4322/tmm.2014.042
Tecnol. Metal. Mater. Min., vol.11 n4, 363-370, 2014, Publication date December 17, 2014 NON-UNIFORM WATER FLUX DENSITY APPROACH APPLIED ON A MATHEMATICAL MODEL OF HEAT TRANSFER AND SOLIDIFICATION FOR A CONTINUOUS CASTING OF ROUND BILLETS Assunção, Charles Sóstenes; Tavares, Roberto Parreiras; Oliveira, Guilherme Water flux density, Heat transfer coefficient, Secondary cooling, Mathematical model. Original Article

https://doi.org/10.4322/tmm.2014.052
Tecnol. Metal. Mater. Min., vol.11 n4, 371-383, 2014, Publication date December 17, 2014 MICROALLOYED STEELS FOR THE AUTOMOTIVE INDUSTRY Bhattacharya, Debanshu AHSS, Automotive, Microalloyed Original Article