Tecnol. Metal. Mater. Min., vol.8 n4, 2011 Editorial Moura Neto, Carlos de . Editorial

https://doi.org/10.4322/tmm.2011.034
Tecnol. Metal. Mater. Min., vol.8 n4, 215-222, 2011 STATISTICAL USE OF STRENGTH AND DUCTILITY DATA ON MODELLING MECHANICAL CHARACTERISTICS AND TOUGHNESS ESTIMATION OF FLAT STEELS Morais, Willy Ank de Toughness, Mechanical properties, Mathematic modeling, Steels Original Article

https://doi.org/10.4322/tmm.2011.035
Tecnol. Metal. Mater. Min., vol.8 n4, 223-229, 2011 OPTIMIZING HEAT TREATMENT OF HIGH CHROMIUM CAST IRONS USING COMPUTATIONAL THERMODYNAMICS Albertin, Eduardo; Beneduce Neto, Flavio; Teixeira, Ivênio de Oliveira High chromium cast iron, Computational thermodynamics Original Article

https://doi.org/10.4322/tmm.2011.036
Tecnol. Metal. Mater. Min., vol.8 n4, 230-236, 2011 NEW TECHNOLOGY FOR PRODUCTION OF HIGH QUALITY LONG PRODUCTS: IMPLEMENTATION EXPERIENCE Mukhopadhyay, Ananya; Galasso, Luigi Martino Process control, Mechanical properties, Hot rolled, Bars Original Article

https://doi.org/10.4322/tmm.2011.037
Tecnol. Metal. Mater. Min., vol.8 n4, 237-242, 2011 CARBOTHERMAL REDUCTION OF ALUMINA IN THE PRESENCE OF LIQUID TIN Mourão, Marcelo Breda; Takano, Cyro; Ferreira Neto, João Batista Alumina, Carbothermic reduction, Solvent, Tin Original Article

https://doi.org/10.4322/tmm.2011.038
Tecnol. Metal. Mater. Min., vol.8 n4, 243-247, 2011 RECYCLING OF PARTICULATE MATERIAL FROM SINTERING PLANT OF STEEL-MAKING INDUSTRY INTO RED CERAMIC Vieira, Carlos Mauricio F.; Lovise, Lucas da Silva; Ribeiro, Mônica Manhães; Sánchez, Rubén; Monteiro, Sérgio Neves; Loss, Terezinha de Lurdes Clayey ceramic, Particulate material, Wastes, Steel making industry Original Article

https://doi.org/10.4322/tmm.2011.039
Tecnol. Metal. Mater. Min., vol.8 n4, 248-253, 2011 SIMULATION AIMING THE DECISION MAKING AT ARCELORMITTAL MONLEVADE EXPANSION Cunha, Paulo Eduardo M. da; Vale, Leonardo Ribeiro do; Rodrigues, Thiago Gurgel; Weidig, Carlos do Carmo; Martins, Cléber Lucio; Gomes, Geraldo Magela; Boratto, Gustavo Lambert; Vasconcelos Junior, Ilemar Geraldo de Simulation, Logistic, Expansion Original Article

https://doi.org/10.4322/tmm.2011.040
Tecnol. Metal. Mater. Min., vol.8 n4, 254-260, 2011 QUANTIFICATION OF COAL CHAR AND COKE FINES IN THE OFF-GAS BLAST FURNACE SAMPLES BY X-RAY DIFFRACTION Machado, André da Silveira; Mexias, André Sampaio; Vilela, Antônio Cezar F.; Osório, Eduardo Char, Coke, X-ray diffraction, Pulverized coal injection Original Article

https://doi.org/10.4322/tmm.2011.041
Tecnol. Metal. Mater. Min., vol.8 n4, 261-266, 2011 MECHANISMS OF CHARGE WEAR IN BALL MILLS Roveri, Eduardo; Chaves, Arthur Pinto Grinding balls, Wear, Abrasion, Corrosion Original Article

https://doi.org/10.4322/tmm.2011.042
Tecnol. Metal. Mater. Min., vol.8 n4, 267-272, 2011 MORPHOLOGICAL CLASSIFICATION OF RECYCLED SANDS THROUGH IMAGE ANALYSIS Gomes, Otávio da Fonseca M.; Lima, Paulo Roberto L.; Brisola, Daisiana Frozi; Gomes, Bruna Maria da C.; Fontes, Ariella Vianna; Paciornik, Sidnei Sand, Waste, Image analyse, Classification Original Article

https://doi.org/10.4322/tmm.2011.043
Tecnol. Metal. Mater. Min., vol.8 n4, 273-278, 2011 LINEPIPE STEELS FOR SOUR SERVICE: CHALLENGES AND PERSPECTIVES Siciliano, Fulvio; Silveira, José Herbert D. da; Camey, Kenji Pipeline steel, Rolling, Chemical composition, Accelerated cooling Original Article

https://doi.org/10.4322/tmm.2011.044
Tecnol. Metal. Mater. Min., vol.8 n4, 279-284, 2011 INVESTIGATION OF CLOGGING MECHANISM IN THE STOPPER ROD REGION EMPLOYING CFD ANALYSIS Contini, André Carlos; Morales, Bayard Beling; Trindade, Leonardo Barboza; Vilela, Antônio Cezar F. Continuous casting of steel, Stopper rod, Clogging, CFD Original Article

https://doi.org/10.4322/tmm.2011.045
Tecnol. Metal. Mater. Min., vol.8 n4, 285-290, 2011 USING OF CALCIUM MAGNESIUM ALUMINATE FLUX WITH HIGH MGO CONTENT TO IMPROVE SECONDARY STEEL LADLE LIFE TIME Evangelista, Paulo César; Jolly, Remy; Wohrmeyer, Christoph; Bruggmann, Christian Synthetic slag, Calcium aluminates, Refractory wear, Secondary steel ladle Original Article