Tecnologia em Metalurgia, Materiais e Mineração
https://tecnologiammm.com.br/ed/588696857f8c9dd9008b458a
Tecnologia em Metalurgia, Materiais e Mineração



Archive

Volume 10, Issue 3, 2013

10(3), 2013

Editorial

https://doi.org/10.4322/tmm.2013.027
EM TRIBUTO Silva, André Luiz V. da C. e . Editorial

Original Article

https://doi.org/10.4322/tmm.2013.028
ANALYSIS OF HEAT TRANSFER OF WORK ROLL COOLING IN HOT ROLLING Salimani, Marcio Rodrigo; Barbosa, Ronaldo Antônio N. M.; Leocadio Junior, Hormando Work roll, Hot rolling, Cooling, Heat transfer coefficient Original Article
https://doi.org/10.4322/tmm.2013.029
HOT ROLLING OF A FERRITIC STAINLESS STEEL IN A STECKEL MILL: THERMOMECHANICAL AND MICROSTRUCTURAL CARACTERIZATION AND MATHEMATICAL MODELLING OF THE EVOLUTION OF RECRYSTALLIZED VOLUME FRACTION OF FERRITE Schuwarten Junior, Willy; Barbosa, Ronaldo Antônio N. M. Mathematical modeling, Steckel mill, Recrystallization, Ferritic stainless steel Original Article
https://doi.org/10.4322/tmm.2013.030
MATHEMATICAL MODELS FOR MICROSTRUCTURE EVOLUTION IN THE SEAMLESS TUBE ROLLING Carvalho, Ricardo Nolasco; Ferreira, Marcelo Almeida C.; Santos, Dagoberto Brandão; Barbosa, Ronaldo Antônio N. M. Hot torsion test, Rolling, Seamless tube, Microstructure modeling Original Article
https://doi.org/10.4322/tmm.2013.031
STUDY OF THE PUNCHING PROCESS BY PUNCH WITH CONVEX ANGLE AIDED BY NUMERICAL SIMULATION Corrêa, Fábio Junkes; Schaeffer, Lirio Punching, Shearing, Rake angle, Numerical simulation Original Article
https://doi.org/10.4322/tmm.2013.032
CHARACTERIZATION OF THE DUST GENERATED IN THE RECYCLING PROCESS OF THE ELECTRIC ARC FURNACE DUST Rizzi, Fábio Gonçalvez; Grillo, Felipe Fadin; Espinosa, Denise Crocce R.; Tenório, Jorge Alberto S. Arc furnace dust, Steelmaking, Characterization, Recycling Original Article
https://doi.org/10.4322/tmm.2013.033
PHYSICAL CHEMISTRY CHARACTERIZATION OF PRINTED CIRCUIT BOARD OF MOBILE PHONES Sant'ana, Hellington Bastos da S. de; Moura, Francisco José; Velt, Hugo Marcelo Characterization, Electronic waste, Metals, Recycling Original Article
https://doi.org/10.4322/tmm.2013.034
INFLUENCE OF THERMAL AGING IN DIFFERENTIAL STICKING PROPERTIES OF THE DRILLING FLUIDS WITH CLAY Leite, Raquel Santos; Nascimento, Renalle Cristina A. de M.; Amorim, Luciana Viana Filtration, Clays, Ageing Original Article
https://doi.org/10.4322/tmm.2013.035
THE GALVANOSTATIC AND POTENTIODYNAMIC (IN CONSTANT VOLTAGE MODE) ELECTROPOLYMERIZATIONS OF HETEROCYCLIC COMPOUNDS. THE PROCESSES AND THEIR MATHEMATICAL DESCRIPTION Tkach, Volodymyr; Nechyporuk, Vasyl'; Yagodynets, Petro Conducting polymer, Electropolymerization, Electrochemical oscillation, Linear stability Original Article
https://doi.org/10.4322/tmm.2013.036
ITERATIVE CALCULATION OF CIRCULATING LOAD IN CLOSED-CIRCUITS Silva, André Carlos; Silva, Elenice Maria S.; Rezende, Ricardo Antônio de Mass balance, Circulating load, Closed-circuit Original Article
https://doi.org/10.4322/tmm.2013.037
STUDY OF THE Fe-Zn PHASES DISTRIBUITON ON GALVANNELED COATINGS USING GDOES Goulart-Santos, Sandra; Anício, Deyselane de Fátima; Barbosa, Aldo Henrique de A. Coatings, Galvanneal, Fe-Zn phases, Glow discharge optical emission spectroscopy Original Article
https://doi.org/10.4322/tmm.2013.038
EFFECT OF DEW POINT OF ATMOSPHERE OF CGL’S ANNEALING FURNACES ON THE QUALITY OF GA COATING ON BAKE HARDENABLE STEEL Guimarães, Juliana Porto; Barbosa, Aldo Henrique de A.; Gonzalez, Berenice Mendonça; Anício, Deyselane de Fátima; Zacarias, José Januário Continuous annealing, Dew point, Bake hardenable steel, Galvannealed coating Original Article
https://doi.org/10.4322/tmm.2013.039
COMPARATIVE STUDY OF THE CORROSION BEHAVIOR OF HOT DIP GALVANIZED, GALVANNEAL AND GALVALUME COATED STEELS Santos, Álvaro Pritzel dos; Rodrigues, Joel da Silva; Dick, Luiz Frederico P. Corrosion, Hot dip galvanized, Galvalume, Galvanneal Original Article

Tecnol. Metal. Mater. Min.

Share this page
Page Sections