https://doi.org/10.4322/2176-1523.1503
Tecnol. Metal. Mater. Min., vol.15 n3, 189-189, 2018 INFORMAÇÃO, FATOS, “FACTFULNESS” André Luiz Vasconcellos da Costa e Silva Editorial

https://doi.org/10.4322/2176-1523.1564
Tecnol. Metal. Mater. Min., vol.15 n3, 190-196, 2018 ANALYSIS OF CORROSIVE BEHAVIOR IN ACID MEDIUM OF API5LX65 UNDER DIFFERENT CONDITIONS OF PLASTIC DEFORMATION Mariana Cristina de Oliveira, Rodrigo Monzon Figueredo, Roberto Zenhei Nakazato, Heloisa Andréa Acciari, Eduardo Norberto Codaro API 5L X65; Plastic deformation; Corrosion; Hydrogen induced cracking.

Especial ABM Week 2017

https://doi.org/10.4322/2176-1523.1570
Tecnol. Metal. Mater. Min., vol.15 n3, 197-201, 2018 REUSE OF IRON ORE TAILING: TREND AND PROCESS OPTIMIZATION BY MAGNETIC CONCENTRATION Aline da Luz Pascoal, Filipe Mattos Gonçalves, Thiago Guerra Cabral, Alysson Antônio Borges, Júnia Soares Alexandrino, Otávia Martins Silva Rodrigues Iron ore; Waste; Magnetic concentration; Fine sinter feed.

Especial ABM Week 2017

https://doi.org/10.4322/2176-1523.1572
Tecnol. Metal. Mater. Min., vol.15 n3, 202-206, 2018 EVALUTION OF THE STRUCTURAL HOMOGENEITY IN 7475-T7351 ALUMINUM ALLOY SUBMITTED TO CONVENTIONAL AND ASYMMETRIC ROLLING Andrey de Moraes Barcelos Casanova Saulo Brinco Diniz Carolline Serafim da Silva Talita Gama de Sousa Angelo Siqueira da Silva Luiz Paulo Mendonça Brandão Andersan dos Santos Paula Conventional rolling; Asymmetric rolling; SPD.

Especial ABM Week 2017

https://doi.org/10.4322/2176-1523.1580
Tecnol. Metal. Mater. Min., vol.15 n3, 207-211, 2018 PET FIBER IN CONCRETE PRODUCTION Nara Caroline da Silva Rodrigues; Magnny Maisy de Barros Carvalho; Anna Victoria Morais Balbino; Adriano Luiz Roma Vasconcelos Polymeric fiber; PET; Sustainable concrete; Mechanical performance.

Especial ABM Week 2017

https://doi.org/10.4322/2176-1523.1584
Tecnol. Metal. Mater. Min., vol.15 n3, 212-216, 2018 DEVELOPMENT AND CONSTRUCTION OF A CENTRIFUGE FOR MATERIALS PROCESSING IN HIGH ACCELERATIONS Plínio Ivo Gama Tenório; Filipe Estevão Freitas; Pedro Tiago Barnabé Lomas; Irajá Newton Bandeira; Rafael Cardoso Toledo; Chen Ying An Centrifuge; Solidification; High gravity.

Especial ABM Week 2017

https://doi.org/10.4322/2176-1523.1590
Tecnol. Metal. Mater. Min., vol.15 n3, 217-220, 2018 EFFECT OF MULTIPLE CYCLES OF SUB-SOLVUS DELTA SOLUTION ANNEALING AND AGING ON THE MICROSTRUCTURE AND MECHANICAL PROPERTIES OF ALLOY 718 Alexandre de Oliveira; Alessandra Vieira Guimarães; Melânea Almeida Ramalho Medeiros; Adeir Junior; Matheus Campolina Mendes; Leonardo Sales Araújo Superalloy 718; δ phase; Heat treatment.

Especial ABM Week 2017

https://doi.org/10.4322/2176-1523.1593
Tecnol. Metal. Mater. Min., vol.15 n3, 221-225, 2018 EVALUATION OF THE MECHANICAL CHARACTERISTICS OF A PROSTATE FOR SMALL AND MEDIUM PUPPIES OF PLA MATERIAL IMPRESSED IN 3D Andressa Pereira dos Reis Croucillo; José Dimas de Arruda; Luciano José Vieira Franco; Jussara Fernandes Leite; Mayara Rezende Carvalho PLA; Polymer; Printer 3D; Prostheses.

Especial ABM Week 2017

https://doi.org/10.4322/2176-1523.1601
Tecnol. Metal. Mater. Min., vol.15 n3, 226-231, 2018 INFLUENCE OF SEN CONFIGURATION IN BEAM BLANK CAST FLUIDODYNAMIC BEHAVIOR Weslei Viana Gabriel; Johne Jesus Mol Peixoto; Gesiane Letícia Alves; Carlos Antonio da Silva; Itavahn Alves da Silva; Varadarajan Seshadri Continuous casting; SEN; Beam blank; Fluid flow.

Especial ABM Week 2017

https://doi.org/10.4322/2176-1523.1389
Tecnol. Metal. Mater. Min., vol.15 n3, 232-241, 2018 EVALUATION OF THE EFFECT OF THE THERMAL CYCLE ON THE CHARACTERISTICS OF WELDED JOINTS THROUGH THE VARIATION OF THE THERMAL INPUT IN WELDED JOINTS OF THE AUTHENTIC AISI 316L STEELS BY THE GMAW PROCESS Rudineli Demarque, Ellem Patrícia dos Santos, Leonardo Martins da Silva, Anderson Vergílio de Queiroz, José Adilson de Castro, Rafaela dos Santos Silva GMAW welding; Stainless steel; Heat affected zone; Melt zone.

Original Article

https://doi.org/10.4322/2176-1523.1429
Tecnol. Metal. Mater. Min., vol.15 n3, 242-247, 2018 USE OF THE REPLY OF CAULIM’S BENEFITING INDUSTRIES FOR THE PRODUCTION OF EARTH-BASED ECOLOGICAL INK Gislaine Handrinelly de Azevedo, Adriana de Fátima Meira Vital Mining waste; Kaolin; Geotint; Ecological ink.

Original Article

https://doi.org/10.4322/2176-1523.1432
Tecnol. Metal. Mater. Min., vol.15 n3, 248-252, 2018 MULTIVARIATE FACTOR ANALYSIS APPLIED IN THE CHARACTERIZATION OF CONTAMINANTS OF AN IRON ORE DEPOSIT Daniel Geraldo da Cruz, Francielle Câmara Nogueira, Daniel Quinaud Rossi, Tiago Martins Pereira, Rodrigo Fina Ferreira Multivariate statistics; Factor analysis; Iron ore.

Original Article

https://doi.org/10.4322/2176-1523.1458
Tecnol. Metal. Mater. Min., vol.15 n3, 254-263, 2018 PERFORMANCE OF PERUVIAN (BAYÓVAR) AND MOROCCAN (KHOURIBGA) PHOSPHATE ROCKS BY CONTINUOUS TESTS IN A PILOT PLANT Ruberlan Gomes da Silva, Angela Nair Avelar, Sérgio Leite Rodrigues, Roberto Correa Cerqueira, Paul Anthony Smith, Wagner Deonizete Soares, Clara Azevedo Mendes de Castro Phosphate rock; Organic matter; Organic carbon; Phosphoric acid.

Original Article

https://doi.org/10.4322/2176-1523.1489
Tecnol. Metal. Mater. Min., vol.15 n3, 264-270, 2018 COMPARATIVE ANALISYS FOR VIBRATION AND NOISE LEVELS IN URBAN ZONES AND MINING AREAS Caio Cesar Vivian Guedes Oliveira, Luis Eduardo de Souza, Luciana Arnt Abichequer, Raul Oliveira Neto, Filipe Schmitz Beretta, Environmental impacts; Vibration; Noise; Seismographic monitoring

Original Article

https://doi.org/10.4322/2176-1523.1476
Tecnol. Metal. Mater. Min., vol.15 n3, 271-277, 2018 CHARACTERIZATION OF A FRICTION STIR WELDED INCONEL 625 JOINT Douglas Martinazzi, Guilherme Vieira Braga Lemos, Alexandre Bellegard Farina, Luciano Bergmann, Jorge Fernandez dos Santos, Afonso Reguly Inconel 625; Friction stir welding; Tool rotational speed; Microstructure.

Original Article

https://doi.org/10.4322/2176-1523.1533
Tecnol. Metal. Mater. Min., vol.15 n3, 278-285, 2018 EFFECT OF HOT METAL’S CHEMICAL COMPOSITION ON CARBON BLOCK FOR BLAST FURNACE’S HEARTH Beatriz Fausta Gandra, Marco Antônio Quintela, Leonardo José Silva de Oliveira Blast furnace; Hearth; Hot metal.

Original Article

https://doi.org/10.4322/2176-1523.1549
Tecnol. Metal. Mater. Min., vol.15 n3, 286-295, 2018 SOLIDIFICATION OF BOF SLAGS MODIFIED BY PYROMETALURGY AND SUBMITTED AT DIFFERENT COOLING RATES Antonio Malynowskyj, Marcelo Breda Mourão, João Batista Ferreira Neto, Fabiano Ferreira Chotoli BOF slag; Slag cooling; Microstructure; Thermodynamic simulation.

Original Article

https://doi.org/10.4322/2176-1523.1261
Tecnol. Metal. Mater. Min., vol.15 n3, 296-302, 2018 DEPOSITION OF COPPER THIN FILMS BY CATHODIC CAGE: ANALYSIS OF THE PLASMA CONFINEMENT AS A FUNCTION OF THE INCREASE OF THE CATHODIC CAGE LID THICKNESS Fernanda de Melo Fernandes; Igor Oliveira Nascimento; Rômulo Ribeiro Magalhães de Sousa; Ivan Alves de Souza; Bruno Felipe Dantas; José Cesar Augusto Queiroz; Thércio Henrique de Carvalho Costa Deposition by plasma; Active Screen Plasma Nitriding (ASPN); Thin film of copper.

Original Article

https://doi.org/10.4322/2176-1523.1362
Tecnol. Metal. Mater. Min., vol.15 n3, 303-313, 2018 FRICTION HYDRO PILLAR PROCESSING (FHPP) APLIED IN DUPLEX STAINLESS STEEL SAF 2205 Douglas Martinazzi; Cleber Rodrigo de Lima Lessa; Arlan Pacheco Figueiredo; Afonso Reguly Structural repair; Duplex stainless steel; FHPP; Intermetallic phases.

Original Article

https://doi.org/10.4322/2176-1523.1381
Tecnol. Metal. Mater. Min., vol.15 n3, 314-321, 2018 GENERATION OF DIGITAL MODEL OF LAND BY AEROPHOTOGRAMETRIC RESTITUTION WITH SUPPORT OF SMALL PORTIE AIRCRAFT VEHICLE: CASE STUDY IN INCOPEL QUARRY - ESTÂNCIA VELHA / RS Marciano Carneiro; Rute Henrique da Silva Ferreira; Telmo Fernando Perez de Quadros; Rubens Müller Kautzmann UAV; Remote sensing; Environmental impact assessment; Geodesy.

Original Article

https://doi.org/10.4322/2176-1523.1392
Tecnol. Metal. Mater. Min., vol.15 n3, 322-326, 2018 INFLUENCE OF Fe(III) IN LEACHING NICKEL TAILINGS ON ION EXCHANGE PROCESS Amilton Barbosa Botelho Junior; Mónica Maria Jiménez Correa; Denise Crocce Romano Espinosa; Jorge Alberto Soares Tenório Mining; Iron; Hydrometallurgy; Chelating resin.

Original Article

https://doi.org/10.4322/2176-1523.01401
Tecnol. Metal. Mater. Min., vol.15 n3, 327-332, 2018 INTERATION EVALUATION OF TITANIUM DIOXIDE NANOPARTICLES IN CONTROLLED LANDIFILLS SOILS CONTAMINATED WITH COPPER OXIDE Elizabeth Mendes de Oliveira; José Adilson de Castro; Leonardo Martins da Silva; Fabiano Alves de Oliveira; Darlene Souza da Silva Almeida Suspensions; Nanoparticles of TiO2 ; Nanoparticles of CuO; Landfills soil; Nanosight.

Original Article

https://doi.org/10.4322/2176-1523.01404
Tecnol. Metal. Mater. Min., vol.15 n3, 333-340, 2018 INFLUENCE OF SHIELDING GAS ON AMOUNT WELDING SLAG AND MECHANICAL PROPERTIES ON MAG WELDING PROCESS OF CARBON STEELS Diego Tolotti de Almeida; Alvaro Santos Piovesan; João Henrique Corrêa de Souza; Maiquel Rodrigo Klhan Kuntz Welding process MAG; Slag weld; Shielding gas; Deposition rate; Deposition efficiency.

Original Article

https://doi.org/10.4322/2176-1523.1428
Tecnol. Metal. Mater. Min., vol.15 n3, 341-349, 2018 JATROPHA CURCAS L. SELECTIVITY IN APATITE, CALCITE AND QUARTZ MICROFLOTATION André Carlos Silva; Izabela Letícia Almeida de Moraes; Elenice Maria Schons Silva; Carlos Murilo Silva Filho; Débora Nascimento Sousa Microflotation; Phosphate; Collector; Selectivity

Original Article

https://doi.org/10.4322/2176-1523.1442
Tecnol. Metal. Mater. Min., vol.15 n3, 350-357, 2018 RECOVERY OF SALEABLE SALTS FROM OCCURRING NATURAL BRINES REPRESENTING THE QUINARY AQUEOUS SYSTEM Na-K-Mg-Ca-Cl Ruberlan Gomes da Silva; Marcelo Seckler; Sonia Denise Ferreira Rocha; Daniel Saturnino; Éder Domingos de Oliveira Crystallization; Potassium; Quinary Na-K-Ca-Mg-Cl Aqueous System.

Original Article

https://doi.org/10.4322/2176-1523.1552
Tecnol. Metal. Mater. Min., vol.15 n3, 358-362, 2018 CARBON STEEL STUDY TO REDUCE THE COST ALLOY IN THE PRODUCTION OF CA60. Bruna Iost Camacho, Anderson Kempka, Wagner Viana Bielefeldt ABNT NBR 7480; CA60; Cold rolling.

Original Article