https://doi.org/10.4322/2176-1523.20191912
Tecnol. Metal. Mater. Min., vol.16 nEspecial, 2019 ARTIFICIAL NEURAL NETWORKS TO PREDICTION FUEL RATE IN THE BLAST FURNACE Gabriela Araújo Gois, Leonard Carvalho, Moacir Andretti, Paulo dos Santos Assis Artificial neural networks; Fuel rate; Blast furnace.

ABM Week 2018

https://doi.org/10.4322/2176-1523.20191460
Tecnol. Metal. Mater. Min., vol.16 nEspecial, 2019 AUTOMATION OF LABORATORY OF IRON ORE SAMPLES ANALYSIS Fernando de Souza Paiva, Gabriel Duarte Lott, Gleison de Oliveira Duarte, Mario Alzamora Gomes, Rodrigo Alves Costa Process automation; Laboratory; Integration of automation systems.

ABM Week 2018

https://doi.org/10.4322/2176-1523.20191929
Tecnol. Metal. Mater. Min., vol.16 nEspecial, 2019 EVALUATION OF CREEP BEHAVIOR OF TI-6AL-4V ALLOY WITH THERMAL BARRIER COATING DEPOSITED BY AIR PLASMA SPRAY Filipe Estevão de Freitas, Adriano Gonçalves dos Reis, Danieli Aparecida Pereira Reis Ti-6Al-4V; Creep behavior; TBC.

ABM Week 2018

https://doi.org/10.4322/2176-1523.20191930
Tecnol. Metal. Mater. Min., vol.16 nEspecial, 2019 TEMPER ROLLING PROCESS MODELING WITH THE FINITE ELEMENT METHOD Yukio Shigaki, Jonatas Mezêncio Silva, Rafael Narciso Alvarenga Romie, Sandro Cardoso Santos Temper rolling; Finite element method; Simulation; Rolling load.

ABM Week 2018

https://doi.org/10.4322/2176-1523.20191634
Tecnol. Metal. Mater. Min., vol.16 nEspecial, 2019 COMPARATIVE BEHAVIOR OF MAGNESIUM ALLOY AZ31 BY CYCLIC POLARIZATION TEST Camila Queiroz Correia Fernandes, José Adilson de Castro, Elivelton Alves Ferreira, Darlene Souza da Silva Almeida, Leonardo Martins da Silva Magnesium Alloy; AZ31; Corrosion resistance; Cyclic polarization.

ABM Week 2018

https://doi.org/10.4322/2176-1523.20191920
Tecnol. Metal. Mater. Min., vol.16 nEspecial, 2019 COMPRESSIVE STRESS INFLUENCE ON MAGNETIC PROPERTIES OF GRAIN ORIENTED ELECTRICAL STEEL Mateus Botani de Souza Dias, Ramon Valls Martin, Luiz Alberto Franco, Fernando José Gomes Landgraf Electrical steel; Power loss; Magnetostriction; Compressive stress

ABM Week 2018

https://doi.org/10.4322/2176-1523.20191922
Tecnol. Metal. Mater. Min., vol.16 nEspecial, 2019 EVALUATION OF INFLUENCE OF INITIAL CONCENTRATION OF CU2+, FE3+ AND NI2+ IN THE RECOVERY OF METAL IONS USING CHELATING RESIN DOWEX XUS43605 Isadora Dias Perez, Mónica Maria Jiménez Correa, Jorge Alberto Soares Tenório, Denise Crocce Romano Espinosa Adsorption; Copper; Iron; Nickel; Chelating resin.

ABM Week 2018

https://doi.org/10.4322/2176-1523.20191933
Tecnol. Metal. Mater. Min., vol.16 nEspecial, 2019 ADAPTATION OF TAYLOR’S RULE TO BRAZILIAN REALITY FOR INITIAL DETERMINATION OF THE PRODUCTION RATE IN MINING PROJECTS Jorge Luiz Valença Mariz, Rodrigo de Lemos Peroni Mine planning; Taylor’s rule; Production rate; Lifetime.

ABM Week 2018

https://doi.org/10.4322/2176-1523.20191936
Tecnol. Metal. Mater. Min., vol.16 nEspecial, 2019 ESTUDO DA RELAÇÃO ENTRE AS PROPRIEDADES DOS CARVÕES E A MICROESTRUTURA POROSA DOS COQUES Anderson Azevedo Agra, Bruno Deves Flores, Anderson Nicolodi, Guilherme Liziero Ruggio da Silva, Antônio Cesar Faria Vilela, Eduardo Osório Coque metalúrgico; Microestrutura; Porosidade; Carvão

ABM Week 2018

https://doi.org/10.4322/2176-1523.20201890
Tecnol. Metal. Mater. Min., vol.16 nEspecial, 2019 TECHNICAL AND ENVIRONMENTAL ASPECTS OF USING MORINGA OLEIFERA HUSK IN COKE BLAST FURNACE INJECTION Alex Milton Albergaria Campos, Paulo Santos Assis, Kátia Monteiro Novack Biomass; Moringa oleifera; Blast furnace injection; Ironmaking; PCI.

ABM Week 2018

https://doi.org/10.4322/2176-1523.20201915
Tecnol. Metal. Mater. Min., vol.16 nEspecial, 2019 ANALYSIS OF MECHANICAL AND CERAMIC BEHAVIOR OF ESTRUCTURAL CERAMIC WITH INCORPORATION OF WASTES Alessandra Savazzini-Reis, Viviana Possamai Della Sagrillo, Francisco Rolando Valenzuela-Diaz Rock waste; Blast furnace sludge; Raw clayey paste; Structural ceramic.

ABM Week 2018

https://doi.org/10.4322/2176-1523.20201925
Tecnol. Metal. Mater. Min., vol.16 nEspecial, 2019 MINING COST REDUCTION THROUGH ORE STOCKPILES MANAGEMENT Walter Schmidt Felsch Junior, Leandro de Carvalho Zanini, Douglas Figueiredo de Souza, Douglas Emerich Gonçalves Oliveira, Alexandro Afonso Pinto, Pablo Rodrigo Vieira da Cunha, Éder Flávio de Araujo Costa, Guilherme Afonso Coutinho Stockpiles; Mine operation; Management; Cost reduction.

ABM Week 2018

https://doi.org/10.4322/2176-1523.20201937
Tecnol. Metal. Mater. Min., vol.16 nEspecial, 2019 TENSILE TEST EVALUATION OF VANADIUM MICROALLOYED STEEL FROM DIFFERENT HEAT TREATMENT ROUTES Gabriela Deslandes Cardoso, Mirelle Oliveira Spindola, Ronaldo de Faria Antunes Precipitation; Vanadium; Tensile test.

ABM Week 2018

https://doi.org/10.4322/2176-1523.20201895
Tecnol. Metal. Mater. Min., vol.16 nEspecial, 2019 STUDY OF SLOPPING IN A BOF USING MULTIVARIATE ANALYSIS DATA Bruna Helena Malovini Loiola, Henrique Silva Furtado, André Vicente Salazar, Itavahn Alves da Silva, Carlos Antônio da Silva Slopping; BOF; Multivariate analysis; Big data.

Original Article

https://doi.org/10.4322/2176-1523.20191931
Tecnol. Metal. Mater. Min., vol.16 nEspecial, 2019 EFFECT OF HEAT TREATMENTS ON THE MECHANICAL PROPERTIES IN UNS S32304 DUPLEX STAINLESS STEEL WELDED PLATES Gabriela Aksascki Caetano, Temístocles de Souza Luz, Lucas Mirandola Coelho, Jesualdo Luiz Rossi, Marcos Tadeu D’Azeredo Orlando Duplex stainless steel; Heat treatment; Stress-strain; GTAW welding.

Original Article

https://doi.org/10.4322/2176-1523.20191932
Tecnol. Metal. Mater. Min., vol.16 nEspecial, 2019 INFLUENCE OF MICROSTRUCTURE IN THE APPLICATION OF 980 MPA CLASS MULTICONSTITUENT STEELS Paulo José Duarte Rodrigues, Fernando de Souza Costa, Dagoberto Brandão Santos Multiphase steel; Hole expansion; Stretch flangeability

Original Article

https://doi.org/10.4322/2176-1523.20191926
Tecnol. Metal. Mater. Min., vol.16 nEspecial, 2019 CHARACTERIZATION OF PARTICULATE MATTER SAMPLED NEXT TO LIMESTONE EXTRACTION AND PROCESSING Monica Castoldi Borlini Gadioli, Jefferson Luiz Camargo, Renata Costalonga Drumond, Vitória Izabela Schrioder de Oliveira, Francisco Wilson Hollanda Vidal Particulate matter; Environmental monitoring; Mining activity; Characterization.

Original Article

https://doi.org/10.4322/2176-1523.20201906
Tecnol. Metal. Mater. Min., vol.16 nEspecial, 2020 STUDY OF DYNAMIC BEHAVIOR OF WAVY ARMOR IN BALLISTIC PROTECTION Daniel Fonseca da Cunha, Achille Arantes Bassi, Rodrigo Felix de Araujo Cardoso, Luiz Paulo Mendonça Brandão, Alaelson Vieira Gomes Dynamic behavior; Ballistic armor; Computational simulation; Ballistic tests.

Original Article

https://doi.org/10.4322/2176-1523.20201923
Tecnol. Metal. Mater. Min., vol.16 nEspecial, 2020 INCORPORATION OF WOOD WASTE IN VIBRATED HYDRAULIC TILE Alessandra Savazzini-Reis, Alana Franzin Fagundes Wood waste; Vibrated hydraulic tile; Joinery waste; Cement-wood.

Original Article

https://doi.org/10.4322/2176-1523.20201916
Tecnol. Metal. Mater. Min., vol.16 nEspecial, 2020 COMPARATIVE STUDY ON CARBONIZATION OF WOOD AND RICE Victória Beatriz Rontal Moisés, Vinicius Franca Oliveir, Cyro Takano, Marcelo Breda Mourão Biomass; Wood charcoal; Rice charcoal.

Original Article

https://doi.org/10.4322/2176-1523.20201921
Tecnol. Metal. Mater. Min., vol.16 nEspecial, e1921, 2019 MACAÚBA PULP OIL AS AN ALTERNATIVE COLECTOR IN THE SELECTIVE FLOTATION OF APATITE AND CALCITE FROM SEDIMENTARY ORIGIN Rayander Martins Pimenta, Jéssica Vicente Luiz, Everton Pedroza dos Santos Apatite; Calcite; Selective flotation; Macaúba.

Original Article

https://doi.org/10.4322/2176-1523.202016esp1
Tecnol. Metal. Mater. Min., vol.16 nEspecial, 2019 ERRATA Erratum