Tecnologia em Metalurgia, Materiais e Mineração https://tecnologiammm.com.br/ed/6036b9efa9539533812cc4b6
Archive
Volume 18, 2021
18, 2021
Original Article - Special issue “Tribute to Prof. T. R. Strohaecker”
https://doi.org/10.4322/2176-1523.20211801 Tecnol. Metal. Mater. Min., vol.18, 1801, 2021 Editorial: Telmo Roberto Strohaecker (1955-2016)
Luiz Carlos Pereira, Afonso Reguly Original Article - Special issue “Tribute to Prof. T. R. Strohaecker”
https://doi.org/10.4322/2176-1523.20202455 Tecnol. Metal. Mater. Min., vol.18, e2455, 2021 Probing underlying mechanisms for pcBN tool decay during friction stir welding of nickel-based alloys
Buchibabu Vicharapu,
Guilherme Vieira Braga Lemos,
Luciano Bergmann,
Jorge Fernandez dos Santos,
Amitava De,
Thomas Clarke Friction stir welding; Inconel 625; pcBN; W-Re; Peak temperature; Tool wear.
Original Article - Special issue “Tribute to Prof. T. R. Strohaecker”
https://doi.org/10.4322/2176-1523.20202452 Tecnol. Metal. Mater. Min., vol.18, e2452, 2021 Manufacturing an upset end by friction welding in an API X65 steel
Guilherme Vieira Braga Lemos,
Diogo Buzzatti,
Carla Amavisca,
Giovani Dalpiaz,
Marcelo Torres Piza Paes,
Luis Kanan,
Afonso Reguly Manufacturing; Friction welding; API X65; Upset end; Fatigue properties.
Original Article - Special issue “Tribute to Prof. T. R. Strohaecker”
https://doi.org/10.4322/2176-1523.20202450 Tecnol. Metal. Mater. Min., vol.18, e2450, 2021 Influence of process parameters on mechanical properties of friction stir welded 5083-O aluminum alloy
Nicole Brum, Carla Amavisca, Jerônimo Ghisi Schroeder, Jonas Buzzatti, Guilherme Vieira Braga Lemos, Diego Tolotti, Marcelo Favaro Friction stir welding; AA 5083-O; Process parameters; Mechanical properties
Original Article - Special issue “Tribute to Prof. T. R. Strohaecker”
https://doi.org/10.4322/2176-1523.20202453 Tecnol. Metal. Mater. Min., vol.18, e2453, 2021 The effect of cold working and solution heat treatment on microstructure and mechanical behavior of Ti35Nb2.5Sn alloy
Silvando Vieira dos Santos, Gustavo Dória Lima, Brenno Lima Nascimento, Lucas Silva Fontes, Sandro Griza Ti35Nb2.5Sn; Beta titanium alloys; Heat treatment; Cold working.
Original Article - Special issue “Tribute to Prof. T. R. Strohaecker”
https://doi.org/10.4322/2176-1523.20202458 Tecnol. Metal. Mater. Min., vol.18, e2458, 2021 Comparative study between crack tip opening displacement techniques by statistical analysis
Matheus Lothar Schmidt, Guilherme Vieira Braga Lemos, Daniel Antonio Kapper Fabricio, Afonso Reguly Fracture toughness; Crack tip opening displacement; Tensile armour wire; Statistical analysis
Original Article - Special issue “Tribute to Prof. T. R. Strohaecker”
https://doi.org/10.4322/2176-1523.20212465 Tecnol. Metal. Mater. Min., vol.18, e2465, 2021 Investigating an API X65 steel pipe cladded with alloy 625
Rangel Knerek, Guilherme Vieira Braga Lemos, George Vander Voort, Diego Aires de Freitas, William Haupt, Renan Landell, Diogo Buzzatti Welding; Clad pipes; GTAW; TIG hotwire; API X65 steel; Alloy 625.
Original Article - Special issue “Tribute to Prof. T. R. Strohaecker”
https://doi.org/10.4322/2176-1523.20212442 Tecnol. Metal. Mater. Min., vol.18, e2442, 2021 Deep cryogenic treatment in AISI D2 tool steel punches to enhance tool life
Fabiano Dornelles Ramos, Josué de Oliveira Bairros, Mauro Francisco Castro Moscoso Deep Cryogenic; Treatment; Tool life; Tool steel.
Original Article - Special issue “Tribute to Prof. T. R. Strohaecker”
https://doi.org/10.4322/2176-1523.20212374 Tecnol. Metal. Mater. Min., vol.18, e2374, 2021 Formation of hydrogen blisters during the solution treatment for aluminum alloys
Daniel Diehl, Eduardo Luis Schneider, Thomas Gabriel Rosauro Clarke Aluminum alloys; Heat treatment; Hydrogen; Oxidation; Blister
Original Article - Special issue “Tribute to Prof. T. R. Strohaecker”
https://doi.org/10.4322/2176-1523.20212403 Tecnol. Metal. Mater. Min., vol.18, e2403, 2021 Residual stress states in cementite and ferrite in a combined cold drawing process of AISI 1045 steel using neutron diffraction and synchrotron radiation
Rafael Menezes Nunes, Alexandre da Silva Rocha, Thomas Georg Karl Hirsch Combined cold drawing; Residual stress; Neutron diffraction; Synchrotron diffraction; Residual stresses; Cementite.
Original Article - Special issue “Tribute to Prof. T. R. Strohaecker”
https://doi.org/10.4322/2176-1523.20212464 Tecnol. Metal. Mater. Min., vol.18, e2464, 2021 Joining of aluminium alloy and galvanized steel sheets multimaterial assembly using a gas metal arc based process
Atanu Das,
Sven-F Goecke,
Amitava De Gas metal arc joining; Aluminium alloy; Galvanized steel; Thermal distortion.
Original Article - Special issue “Tribute to Prof. T. R. Strohaecker”
https://doi.org/10.4322/2176-1523.20212448 Tecnol. Metal. Mater. Min., vol.18, e2448, 2021 Comparison of surface properties modification by direct and active screen plasma nitriding of an ASTM M2 high-speed steel in a nitrogen rich gas mixture
Leonardo Fonseca Oliveira, Alexandre da Silva Rocha, Giovanni Rocha dos Santos Plasma nitriding; Active screen; ASTM M2 steel; Sliding wear.
Original Article - Special issue “Tribute to Prof. T. R. Strohaecker”
https://doi.org/10.4322/2176-1523.20202407 Tecnol. Metal. Mater. Min., vol.18, e2407, 2021 Characterization of anodized and bare 7075-T6 aluminum alloy treated with Zr-based conversion coating
Jéssica Salles Pinheiro, Claudia Trindade Oliveira, Gabriel Regio, Nicolle Goi, Jane Zoppas Ferreira Aluminum alloy; Anodizing; Conversion coating; Hydrophobicity.
Original Article - Special issue “Tribute to Prof. T. R. Strohaecker”
https://doi.org/10.4322/2176-1523.20212463 Tecnol. Metal. Mater. Min., vol.18, e2463, 2021 Fatigue behaviour of an epoxy adhesive under mixed-mode conditions
Mário Rui Oliveira Cunha, Ricardo João Camilo Carbas, Eduardo André Sousa Marques, Alireza Akhavan-Safar, Lucas Filipe Martins da Silva Epoxy adhesive; Fatigue loads; Mixed-mode tests; Fracture envelope.
Original Article - Special issue “Tribute to Prof. T. R. Strohaecker”
https://doi.org/10.4322/2176-1523.20212473 Tecnol. Metal. Mater. Min., vol.18, e2473, 2021 Method validation for fatigue testing in kingpins
Jonas Trento Buzzatti,
Daniel Antonio Kapper Fabricio,
Guilherme Vieira Braga Lemos,
Hilton Rutsatz,
Guilherme Kieckow,
Fabiano Mattei,
Etiene Benini Mendes Method validation; Metrology; Fatigue testing; Kingpin
Original Article - Special issue “Tribute to Prof. T. R. Strohaecker”
https://doi.org/10.4322/2176-1523.20212411 Tecnol. Metal. Mater. Min., vol.18, e2411, 2021 Stress corrosion cracking of carbon steels on CO2 /H2 O systems
Mariana dos Reis Tagliari, Pedro Craidy, Derek Fonseca, Marcelo Favaro Borges Stress corrosion cracking; CO2 /H2 O; High strength carbon steels.
Original Article - Special issue “Tribute to Prof. T. R. Strohaecker”
https://doi.org/10.4322/2176-1523.20212469 Tecnol. Metal. Mater. Min., vol.18, e2469, 2021 Use of instrumented charpy testing on the fracture toughness characterization of metallic materials
Luiz Carlos Pereira, Juan Carlos Garcia de Blas, Sandro Griza, Fathi Aref Ibrahim Darwish Instrumented Charpy test; Dynamic Fracture Toughness; Ductile-brittle transition.
Original Article - Special issue “Tribute to Prof. T. R. Strohaecker”
https://doi.org/10.4322/2176-1523.20212466 Tecnol. Metal. Mater. Min., vol.18, e2466, 2021 Analysis of the applicability of polymeric solutions as cooling fluid in the quenching of low-alloy steels
Eduardo da Rosa Vieira,
Jorge Luis Braz Medeiros,
Luciano Volcanoglo Biehl,
Vagner Machado Costa,
Carlos Otávio Damas Martins,
José de Souza Manufacturing; Quenching; Polymer solutions; Low alloy steels.
Original Article - Special issue “Tribute to Prof. T. R. Strohaecker”
https://doi.org/10.4322/2176-1523.20212467 Tecnol. Metal. Mater. Min., vol.18, e2467, 2021 Applying multiparametric ultrasonic nondestructive test for structural characterization of age hardened aluminum alloy
Erick Cerqueira das Neves, Ivan Costa e Silva, Jorge Luis Braz Medeiros, Luciano Volcanoglo Biehl, Carlos Otávio Damas Martins Structural integrity; Materials manufacturing; Quality control; Nondestructive tests; Multiparametric analysis; Ultrasonic waves.
Original Article - Special issue “Tribute to Prof. T. R. Strohaecker”
https://doi.org/10.4322/2176-1523.20212451 Tecnol. Metal. Mater. Min., vol.18, e2451, 2021 Quantitative analysis of localized corrosion in tensile armor wire of flexible riser submitted to sweet stress corrosion cracking testing with crevice
Matheus Porto Trindade, Ihana Gabriela Conceição de Jesus, Matheus Mariano da Silva Reis, Brenno Lima Nascimento, Fabricio Pinheiro dos Santos, Sandro Griz Risers; Crevice corrosion; Stress corrosion; Tensile armor wires.
Original Article - Special issue “Tribute to Prof. T. R. Strohaecker”
https://doi.org/10.4322/2176-1523.20212449 Tecnol. Metal. Mater. Min., vol.18, e2449, 2021 Study of fatigue crack growth behavior of cold worked and aged TiNbSn alloys
Tiago Nunes Lima, Thiago Figueiredo Azevedo, Luiz Carlos Pereira, Sandro Griza TiNbSn alloy; Cold working; Aging; Fatigue crack growth.
Original Article - Special issue “Tribute to Prof. T. R. Strohaecker”
Original Article
https://doi.org/10.4322/2176-1523.20212227 Tecnol. Metal. Mater. Min., vol.18, e2227, 2021 Optimization of semisolid AA356 raw material processing
Luis Vanderlei Torres, Eugênio José Zoqui Thixoforming; Semisolid material; AA356 alloy.
Original Article
https://doi.org/10.4322/2176-1523.20212140 Tecnol. Metal. Mater. Min., vol.18, e2140, 2021 Replacement of the gravel by ceramic waste from the lost wax casting process in the high resistence concretes
Hueslei Grison Soares, Cleber Rodrigo de Lima Lessa Residue from casting; Lost wax casting; High resistance concrete; Reuse of residue.
Original Article
https://doi.org/10.4322/2176-1523.20212138 Tecnol. Metal. Mater. Min., vol.18, e2138, 2021 Evaluation of the permeability of latex gloves used in a laboratory for the handling of polymeric nanoparticles
Laís Schmidt, Cristiane Bastos de Mattos, Vanusca Dalosto Jahno, Carlos Leonardo Pandolfo Carone, Luis Fernando Hoffmann, Cláudia Trindade Oliveira, Sandra Raquel Kunst, Jane Zoppas Ferreira, Fernando Dal Pont Morisso Gloves; Permeation; Franz diffusion cell; Nanoparticles.
Original Article
https://doi.org/10.4322/2176-1523.20212070 Tecnol. Metal. Mater. Min., vol.18, e2070, 2021 Heat treatment in Zamac to reduce porosity defects
Fernando Konarzewski Dienstmann, Luciane Taís Fuhr, Leonardo Felix Scheffel, Carlos Leonardo Pandolfo Carone, Fernando Dal Pont Morisso, Eduardo Luís Schneider, Sandra Raquel Kunst, Jane Zoppas Ferreira, Cláudia Trindade Oliveira Zamac; Porosity; Heat treatment.
Original Article
https://doi.org/10.4322/2176-1523.20212236 Tecnol. Metal. Mater. Min., vol.18, e2236, 2021 Development of a refractory mortar formulation using industrial waste for application in civil construction
Douglas Luiz Giordani, Alexandre Zaccaron, Thuanni Gesser Müller, Camila Machado de Oliveira, Fernanda Cristina Restelatto, Michael Peterson Refractory mortar; Cement; Waste recovery; Dilatometry.
Original Article
https://doi.org/10.4322/2176-1523.20212147 Tecnol. Metal. Mater. Min., vol.18, e2147, 2021 Technological properties of soil-cement brick with 2 holes
Felipe Pinheiro Teixeira, Thaís Guedes Machado, Neilton Paixão de Jesus Junior , Simone Pereira Taguchi Borges, Rosinei Batista Ribeiro, Luiz Antônio Borges Júnior Brick; Soil-cement; Compression; Water absorption
Original Article
https://doi.org/10.4322/2176-1523.20212197 Tecnol. Metal. Mater. Min., vol.18, e2197, 2021 Effect of binder and drum speed on hematitic fines balling
Fernando Rodrigues da Cunha, José Aurélio Medeiros da Luz, Pedro Henrique Neuppmann Granulation; Iron ore; Carboxymethylcellulose; Bentonite
Original Article
https://doi.org/10.4322/2176-1523.20212225 Tecnol. Metal. Mater. Min., vol.18, e2225, 2021 Temperature influence on the mechanical behavior of the ASTM A240 UNS S41003 ferritic stainless steel
Amanda Aparecida de Fátima Arruda,
Ana Cecília de Carvalho,
Rhelman Rossano Urzêdo Queiroz,
Geraldo Lúcio de Faria ASTM A240 UNS S41003; 410D; Hot tensile test; Ductile-brittle transition; Creep Sag Test.
Original Article
https://doi.org/10.4322/2176-1523.20212125 Tecnol. Metal. Mater. Min., vol.18, e2125, 2021 Study of the treatment of oxidation in different microstructures of the titanium alloy
Fabrícia Assis Resende Gonçalves, Renata Jesuina Takahash, Danieli Aparecida Pereira Reis Ti-6Al-4V; Oxidation; Heat Treatment.
Original Article
https://doi.org/10.4322/2176-1523.20212480 Tecnol. Metal. Mater. Min., vol.18, e2480, 2021 Evaluation of compressive strength in geopolymer mortars produced using iron ore tailings ground by tumbling ball mills
Eduardo Júnio D’ Almeida Silva,
Douglas Batista Mazzinghy Mining wastes; Grinding; Coproducts; Sustainability; Circular economy.
Original Article
https://doi.org/10.4322/2176-1523.20212201 Tecnol. Metal. Mater. Min., vol.18, e2201, 2021 Effect of the casting thickness (3.2 to 5.8 mm) on the tensile strength of grey cast iron
Felipe Fonseca de Oliveira Lima, Cesar Roberto de Farias Azevedo Pearlitic grey cast iron; Thin-wall casting; Tensile strength; Microstructural parameters; Mathematical model validation.
Original Article
https://doi.org/10.4322/2176-1523.20212483 Tecnol. Metal. Mater. Min., vol.18, e2483, 2021 Hidrothermal liquefaction of lignocellulosic residue to produce sustainable materials: fractions characterization
Solange Kazue Utimura, Denise Crocce Romano Espinosa, Marco Antonio das Neves, Isao Kobayashi, Mitsutoshi Nakajima, Cristina Stewart Bogsan Hydrothermal liquefaction; Sugarcane bagasse; Subcritical conditions; Lignocellulosic residues; Materials; Waste
Original Article
https://doi.org/10.4322/2176-1523.20212519 Tecnol. Metal. Mater. Min., vol.18, e2519, 2021 A predictive model for hydrogen content in steel in non-degassed heats
Beatriz de Paula Lopes, José Adilson de Castro, Leonardo Martins Demuner, André Luiz Vasconcellos da Costa e Silva Hydrogen; Steel; Steel plant
Original Article
https://doi.org/10.4322/2176-1523.20211682 Tecnol. Metal. Mater. Min., vol.18, e1682, 2021 Application of TOPSIS in evaluating the vacuum infusion process toward manufacturing of jute yarn composites
Alessandro de Castro Corrêa, Jean da Silva Rodrigues, Tainã Fernandes Rodrigues, Carlos André Corrêa de Mattos, Danielle Cristina Gonzaga Corrêa, Cláudia Canto de Souza Leão Vacuum infusion process; TOPSIS; Entropy; Composite; Jute yarn.
Original Article
https://doi.org/10.4322/2176-1523.20212270 Tecnol. Metal. Mater. Min., vol.18, e2270, 2021 Influence of cutting parameters on ASTM A518 GR.3 alloy turning
Grégori Folis Dagostin, Anderson Daleffe, Luiz Carlos de Cesaro Cavaler Machining; Turning; Cutting parameters; ASTM A518 GR.3.
Original Article
https://doi.org/10.4322/2176-1523.20212145 Tecnol. Metal. Mater. Min., vol.18, e2145, 2021 Comparative analysis between new and remelted commercial cast iron in a craft company with application in brake drums
Licurgo Borges Winck, Gabriel dos Santos Camargo, Sergio Junio Martins Rodrigues, Thaís Neves Silva Cast iron; Casting; Rockwell hardness; Metallography.
Original Article
https://doi.org/10.4322/2176-1523.20212255 Tecnol. Metal. Mater. Min., vol.18, e2255, 2021 Study of the hot stamping of 22MnB5 steel with Al-Si coating
Bruno César Cordeiro, André Rosiak, Thais Morato, Lirio Schaeffer Hot stamping; 22MnB5; Coating; Corrosion.
Original Article
https://doi.org/10.4322/2176-1523.20211984 Tecnol. Metal. Mater. Min., vol.18, e1984, 2021 Evaluation of performance of WC-CoCr coatings with HVOF and hard chrome for application in clay mixing machine
Bruno Nicoladelli Netto; Reginaldo Rosso Marcello; Richard de Medeiros Castro; Elvys Isaías Mercado Curi; Luiz Carlos de Cesaro Cavaler Mixers; Nodular cast iron; Wear; Hard Chrome; WC-CoCr
Original Article
https://doi.org/10.4322/2176-1523.20212333 Tecnol. Metal. Mater. Min., vol.18, e2333, 2021 Analysis of pack carburizing followed by diretct quenching applied to spur gears (module 2) of SAE 8620 steel
Bruno Lessmann Fertig, Jean Senise Pimenta Pack carburizing; Direct quenching; Spur gear; SAE 8620 steel.
Original Article
https://doi.org/10.4322/2176-1523.20212373 Tecnol. Metal. Mater. Min., vol.18, e2373, 2021 Evaluation of iron ore typology in sticking tests
Jean Philippe Santos Gherardi de Alencar,
Gabriel Silva do Carmo,
Natállia Luiza Antunes Silva,
Nathália Duarte Bastos,
Pedro Silva Figueiredo Iron ore; Flowability; Handling; Moisture.
Original Article
https://doi.org/10.4322/2176-1523.20212143 Tecnol. Metal. Mater. Min., vol.18, e2143, 2021 Influence of the substrate doping type on thin bifacial solar cells
Graziella Fernandes Nassau Costa, Adriano Moehlecke, Izete Zanesco Bifacial solar cells; Thin Si wafers; N-type and p-type silicon.
Original Article
https://doi.org/10.4322/2176-1523.20212340 Tecnol. Metal. Mater. Min., vol.18, e2340, 2021 Corrosion behavior of low carbon steel processed by ECAP in neutral and alkaline environment
Jorgimara Oliveira Braga,
Jefferson Fabricio Lins,
Gabriel Pessoa de Castro,
Helder Alves de Almeida Junior,
Igor Cuzzuol dos Santos,
Gustavo Henrique Sousa,
Izabel Lima Criscuolo,
Cláudio Marcio Santana,
Ursula Cid Pereira Low carbon steels; SPD; ECAP; Corrosion.
Original Article
https://doi.org/10.4322/2176-1523.20212271 Tecnol. Metal. Mater. Min., vol.18, e2271, 2021 Application of signature waves on the study of vibrations generated by rock blasting
Paulo José Costa Couceiro Júnior,
Eraldo Florêncio da Silva Júnior Signature wave; Vibrations; Rock blasting.
Original Article
https://doi.org/10.4322/2176-1523.20212162 Tecnol. Metal. Mater. Min., vol.18, e2162, 2021 Evaluation of the recovery of titanium contained in the niobium ores from Catalão region
Fernando Rodrigues da Cunha, André Carlos Silva Ilmenite; FeTi; Niobium; Titanium
Original Article
https://doi.org/10.4322/2176-1523.20212046 Tecnol. Metal. Mater. Min., vol.18, e2046, 2021 Porous structure obtained by anodizing niobium in NaOH
Rafael Martins da Rocha,
Leonardo Felix Scheffel,
Carlos Leonardo Pandolfo Carone,
Fernando Dal Pont Morisso,
Sandra Raquel Kunst,
Jane Zoppas Ferreira,
Cláudia Trindade Oliveira Niobium; Anodizing; Porous oxide; Sparking.
Original Article
https://doi.org/10.4322/2176-1523.20212326 Tecnol. Metal. Mater. Min., vol.18, e2326, 2021 Influence of the purge gas in the prevention of hydrogen cracking in welded joints of API 5L X80 steel
Roberta Adrielle Lima Vieira,
Waldemir dos Passos Martins,
Valdemar Silva Leal,
Antonio Ernandes Macêdo Paiva Hydrogen cracking; Purge gas; Implant test; Acoustic Emission System.
Original Article
https://doi.org/10.4322/2176-1523.20212297 Tecnol. Metal. Mater. Min., vol.18, e2297, 2021 Optical microscopic analysis of a DIN 18MnCrSiMo6-4 bainitic steel austenitized and quenched with different coolants
Cristiano José Turra, Pedro José de Castro, Antonio Figueiredo Silveira, Alexandre da Silva Rocha Bainitic steel; Bainite; Multiphase microstructure; Cooling
Original Article
https://doi.org/10.4322/2176-1523.20212398 Tecnol. Metal. Mater. Min., vol.18, e2398, 2021 Consortia and their barriers in the development of pre-competitive technologies in R&D projects: conceptual model and application
Reinaldo Lopes Ferreira, Cristina Godoy, Eduardo Vasconcellos, Fernando Fernandez Pre-competitive R&D consortium; Barriers; Collaborative research.
Original Article
https://doi.org/10.4322/2176-1523.20212384 Tecnol. Metal. Mater. Min., vol.18, e2384, 2021 Polyvinyl chloride and cork composites: evaluation of thermal, flammability and morphology
Pedro José Gomes Rodrigues, Lucas Rafael Carneiro da Silva, Arquimedes Lopes Nunes Filho, Renata Barbosa, Joyce Batista Azevedo, Tatianny Soares Alves PVC; Cork; Composites; Thermal behavior.
Original Article
https://doi.org/10.4322/2176-1523.20212348 Tecnol. Metal. Mater. Min., vol.18, e2348, 2021 Caracterização do defeito spalling e correlação com a região da solda aluminotérmica em trilho ferroviário
Gregory de Oliveira Miranda, Vinicius Silva dos Reis, Carlos Vinicius de Paes Santos, Fábio Alves Rabelo Júnior, Edgar Costa Cardoso, José Maria do Vale Quaresma Defeitos em trilhos; Caracterização; Fadiga de contato de rolamento; Spalling.
Original Article
https://doi.org/10.4322/2176-1523.20212349 Tecnol. Metal. Mater. Min., vol.18, e2349, 2021 Hydrogen interaction in ultrafine grain duplex stainless steel 2205 aged after cold rolling
Loyslene Rabelo Fernandes, Thaís Braga de Abreu, Lisa Claeys, Tom Depover, Kim Verbeken, Dagoberto Brandão Santos Duplex stainless steel; Hydrogen embrittlement; Hydrogen absorption; Hydrogen diffusivity; Brittle fracture
Original Article
https://doi.org/10.4322/2176-1523.20212382 Tecnol. Metal. Mater. Min., vol.18, e2382, 2021 Experimental analysis of the structural concrete with the addition of waste from the tire recovery process
Priscila Marques Correa,
Ruth Marlene Campomanes Santana Rubber; Environment; Waste; Construction
Original Article
https://doi.org/10.4322/2176-1523.20212336 Tecnol. Metal. Mater. Min., vol.18, e2336, 2021 Study of AISI 409 stainless steel formability under complex deformation routes
Frederick Louis Dias de Morais, Elaine Carballo Siqueira Corrêa, Wellington Lopes AISI 409 steel; Shearing; Strain path.
Original Article
https://doi.org/10.4322/2176-1523.20212358 Tecnol. Metal. Mater. Min., vol.18, e2358, 2021 Synthesis of calcium phosphate biphasic ceramics by Pechini method
José Rosa de Souza Farias,
Geysivana Késsya Garcia Carvalho,
Ycaro Breno Alves de Almeida,
Josy Anteveli Osajima Furtini,
Edson Cavalcanti Silva Filho,
Aluska do Nascimento Simões Braga Hydroxyapatite; Tricalcium beta phosphate; Pechini.
Original Article
https://doi.org/10.4322/2176-1523.20212058 Tecnol. Metal. Mater. Min., vol.18, e2058, 2021 Electric and magnetic behavior of Ni-Zn ceramic
Valesca Donizeti de Oliveira,
Claudiney de Sales Pereira Mendonça,
Manuel Ribeiro da Silva,
Rero Marques Rubinger,
Adhimar Flávio Oliveira,
Vander Alkmin dos Santos Ribeiro Nickel-zinc ferrite; Magnetization saturation; Spinel.
Original Article
https://doi.org/10.4322/2176-1523.20212314 Tecnol. Metal. Mater. Min., vol.18, e2314, 2021 Influence of acetic acid concentration on pyrolenous liquor in niobio anodization
Luã Tainachi Mueller,
Keila Vieira Oliveira,
Fernando Dal Pont Morisso,
Sandra Raquel Kunst,
Carlos Leonardo Pandolfo Carone,
Cláudia Trindade Oliveira Anodization; Nióbium; Pyrolignous liquor.
Original Article
https://doi.org/10.4322/2176-1523.20212433 Tecnol. Metal. Mater. Min., vol.18, e2433, 2021 Evaluation of replacement of CaF2 for B2 O3 in desulfurizing synthetic slags in the secondary steelmaking process
Jorge Luís Coleti,
Felipe Fardin Grillo,
Eduardo Junca,
Rafael Giuga Borba de Mello,
Denise Crocce Romano Espinosa ,
Jorge Alberto Soares Tenório Synthetic slag; Desulfurization; Boron oxide; Secondary refining.
Original Article
https://doi.org/10.4322/2176-1523.20212220 Tecnol. Metal. Mater. Min., vol.18, e2220, 2021 Use of parametric models for investment estimates applied to the primary and secondary crushing stages of iron ore
Paulo César Salvador de Aguiar Júnior, Douglas Batista Mazzinghy, Carlos Esteves Teixeira, Fábio Paiva Crushing; Cost estimation; Regression; Principal component analysis; Linear Programming.
Original Article
https://doi.org/10.4322/2176-1523.20212317 Tecnol. Metal. Mater. Min., vol.18, e2317, 2021 Analysis of the applicability of the double layer technique for the stress relief in welded joints of microalloyed steels
Leandro Macedo Cozza, Jorge Luis Braz Medeiros, Fabio Augusto Dornelles do Amaral, Luciano Volcanoglo Biehl, Sérgio da Silva Cava, Fábio Calcagno Riemke, Demostenes Ferreira Filho Welding; Hear treatment; Stress relief.
Original Article
https://doi.org/10.4322/2176-1523.20212316 Tecnol. Metal. Mater. Min., vol.18, e2316, 2021 Morphological and microstructural characterization of Al95Fe2 Cr2 Ti1 powders produced by two different gas atomizers
Aylanna Priscila Marques de Araújo, Leandro Micheloti, Claudio Shyinti Kiminami, Claudemiro Bolfari, Volker Uhlenwinkel, Piter Gargarella Gas atomization; Rapid solidification; Al-based alloys; Physical and microstructural powder properties.
Original Article
https://doi.org/10.4322/2176-1523.20212520 Tecnol. Metal. Mater. Min., vol.18, e2520, 2021 Textile waste valorization in the construction industry
Elen Machado de Oliveira, Elis Machado de Oliveira, Camila Machado de Oliveira, Alexandre Gonçalves Dal-Bó, Michael Peterson Coating mortar; Textile waste; Reinforcement material; Mechanical strength.
Original Article
https://doi.org/10.4322/2176-1523.20212363 Tecnol. Metal. Mater. Min., vol.18, e2363, 2021 Evaluation of CO2 laser nitretation parameters on maraging 18Ni steel (300) to improve oxidation resistance
João Paulo Giacomelli,
Filipe Estevão de Freitas,
Adriano Gonçalves dos Reis,
Aline Capella de Oliveira,
Vanessa Ribeiro dos Santos,
Danieli Aparecida Pereira Reis Maraging steel; Oxidation; Nitriding; CO2 laser
Original Article
https://doi.org/10.4322/2176-1523.20212123 Tecnol. Metal. Mater. Min., vol.18, e2123, 2021 Mechanical performance of heavy gauge press hardened steel modified with Nb and Mo additions on GMAW welded joints
Tiago Führ,
Diego Tolotti,
Daniela Bertol,
João Henrique Corrêa de Souza,
Angélica Paola de Oliveira Lopes Presshardening steel; Hot stamping; Welding metallurgy; Alloy design
Original Article
https://doi.org/10.4322/2176-1523.20212512 Tecnol. Metal. Mater. Min., vol.18, e2512, 2021 Characterization of alluvial gold ore using the Falcon concentrator
Arthur Andrade Ricardo, Rísia Magriotis Papini, Bruno Augusto Cabral Góes Gravitic concentration; Gold ore; Sluice concentrator; Falcon concentrator
Original Article
https://doi.org/10.4322/2176-1523.20212459 Tecnol. Metal. Mater. Min., vol.18, e2459, 2021 Waste from the industry of disposable plastic straws: influence of the alkaline treatment on the properties of concrete parts for interlocking pavements
Elis Machado de Oliveira, Elen Machado de Oliveira, Camila Machado de Oliveira, Alexandre Gonçalves Dal-Bó, Michael Peterson Concrete; Reinforcement material; Straw shavings
Original Article
https://doi.org/10.4322/2176-1523.20211991 Tecnol. Metal. Mater. Min., vol.18, e1991, 2021 Comparison of the TIG and A-TIG welding process in a low carbon steel with molybdenum microadition
Mônica Aline Magalhães Gurgel, Ailanderson José Magalhães Gurgel, Vinicius Aleixo Silvestre, Frank de Mello Liberato, Andersan dos Santos Paula Welding; TIG; A-TIG; Active Flux; Ultramicrohardness
Original Article
https://doi.org/10.4322/2176-1523.20212309 Tecnol. Metal. Mater. Min., vol.18, e2309, 2021 Economic feasibility study of a quarry mine under contractual risk in probabilistic approach
Jorge Luiz Valença Mariz, Suelen Silva Rocha, Júlio César de Souza Quarry mining; Mineral economics; Economic feasibility; Risk analysis
Original Article
https://doi.org/10.4322/2176-1523.20212440 Tecnol. Metal. Mater. Min., vol.18, e2440, 2021 Effects of quenching heat treatments with intercritical austenitizing in the microstructure, elements partition and Ms temperature in a TRIP780 steel
Natália Aparecida Barbosa Pimenta, Charles Henrique Xavier Morais Magalhães, Pablo Henrique Kelly Campos, Geraldo Lúcio de Faria Intercritical austenitizing; TRIP780 steel; Partitioning; Ms temperature.
Original Article
https://doi.org/10.4322/2176-1523.20212486 Tecnol. Metal. Mater. Min., vol.18, e2486, 2021 The effects of agglomeration time and burnt lime addition on the optimization of iron ore cold agglomeration process
Jean Philippe Santos Gherardi de Alencar, Fernando Luiz Câmara Campos Júnior Iron ore; Sintering; Permeability; Agglomeration.
Original Article
https://doi.org/10.4322/2176-1523.20212425 Tecnol. Metal. Mater. Min., vol.18, e2425, 2021 Analysis of the influence of aging conditions on the mechanical strength and corrosion of UNS S31803 steel
Cássia Barbosa Gomes, Elaine Carballo Siqueira Corrêa, Renata Braga Soares, Ricardo Adriano Dorledo de Faria, Vanessa Freitas de Cunha Lins, Wellington Lopes Duplex Stainless Steel, Sigma Phase, Corrosion Resistance.
Original Article
https://doi.org/10.4322/2176-1523.20212409 Tecnol. Metal. Mater. Min., vol.18, e2409, 2021 The impact of the emission trading scheme on the european steel industry and the future trends for technologies for obtaining primary iron
Jean Philippe Santos Gherardi de Alencar, Wander Luiz Vasconcelos, Valdirene Gonzaga de Resende Greenhouse gases; Emissions; Ironmaking; Steelmaking.
Original Article
https://doi.org/10.4322/2176-1523.20212402 Tecnol. Metal. Mater. Min., vol.18, e2402, 2021 Numerical modeling of the continuous casting hollow billets heat transfer in industrial plant
Edson Fouad Beck Filho, Paulo Jesus Aniceto, Noé Cheung, Carlos Henrique da Silva Santos, Felipe Bertelli Continuous casting; Numerical modeling; Finite difference method
Original Article
https://doi.org/10.4322/2176-1523.20212182 Tecnol. Metal. Mater. Min., vol.18, e2182, 2021 Experimental analysis of the effects of froth presence on iron ore slurry centrifugal pumping
Reginaldo Amaro Ferreira, Aline Pereira Leite Nunes Slurry pumping; Froth pumping; Flotation; Iron ore
Original Article
https://doi.org/10.4322/2176-1523.20212055 Tecnol. Metal. Mater. Min., vol.18, e2055, 2021 Effect of zircon content and deformation on aging of the Al-Zr alloys
Paulo Mendel Fernandes, Carlos Augusto Silva de Oliveira Al-Zr alloys; Deformation; Ageing; Precipitation.
Original Article
https://doi.org/10.4322/2176-1523.20212428 Tecnol. Metal. Mater. Min., vol.18, e2428, 2021 Regression modeling to predict ultrafine particles emission in a mineral plant combining meteorological and process variables
Elisangela Krauss, Monica Lopes Aguiar Continuous dust analysers; Ultrafine particles; Regression model; Mineral fertilizer.
Original Article
https://doi.org/10.4322/2176-1523.20212472 Tecnol. Metal. Mater. Min., vol.18, e2472, 2021 A workflow for defining geological domains using machine learning and geostatistics
Gabriel de Castro Moreira, Rudi César Comiotto Modena, João Felipe Coimbra Leite Costa, Diego Machado Marques Cluster analysis; Geostatistics; Mineral resources; Mining.
Original Article
https://doi.org/10.4322/2176-1523.20212367 Tecnol. Metal. Mater. Min., vol.18, e2367, 2021 Evaluation of picric acid etchant formulations for the prior austenite grain revelation in different steel types
Natália Aparecida Barbosa Pimenta, Paulo Sérgio Moreira, Geraldo Lúcio de Faria Prior austenite grain; Picric acid; Hydrochloric acid; Carbon equivalent.
Original Article
https://doi.org/10.4322/2176-1523.20212456 Tecnol. Metal. Mater. Min., vol.18, e2456, 2021 Bentonitic clay functioned with potassium: characterization and use as a catalyst for cotton oil transesterification reaction
Jonei Marques da Costa, Luiz Rogério Pinho de Andrade Lima Clay; Characterization; Functionalized materials; Catalyst.
Original Article
https://doi.org/10.4322/2176-1523.20212359 Tecnol. Metal. Mater. Min., vol.18, e2359, 2021 Benefits of using the electric fleet for underground mine ventilation
Leandro de Vilhena Costa, José Margarida da Silva Mining ventilation; Electrical vehicles; Diesel; Heat emission.
Original Article
Tecnol. Metal. Mater. Min.
